From: Anshuman Gupta <anshuman.gupta@intel.com>
To: Uma Shankar <uma.shankar@intel.com>
Cc: "Khor, Swee Aun" <swee.aun.khor@intel.com>,
"intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>
Subject: Re: [Intel-gfx] [PATCH] drm/i915/display: Trigger Modeset at boot for audio codec init
Date: Wed, 18 Mar 2020 17:37:17 +0530 [thread overview]
Message-ID: <20200318120716.GA27671@intel.com> (raw)
In-Reply-To: <20200318113009.16757-1-uma.shankar@intel.com>
On 2020-03-18 at 17:00:09 +0530, Uma Shankar wrote:
> If external monitors are connected during boot up, driver
> uses the same mode programmed by BIOS and avoids a full modeset.
> This results in display audio codec left uninitialized and
> display audio fails to work till user triggers a modeset.
>
> This patch fixes the same by triggering a modeset at boot.
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> Signed-off-by: SweeAun Khor <swee.aun.khor@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 4 ++++
> drivers/gpu/drm/i915/display/intel_display.c | 8 ++++++++
> drivers/gpu/drm/i915/i915_drv.h | 3 +++
> 3 files changed, 15 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 73d0f4648c06..ba380afa73a6 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3704,6 +3704,10 @@ static void intel_ddi_update_pipe(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state)
> {
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +
> + /* Clear the bootflag */
> + dev_priv->bootflag = false;
>
> if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
> intel_ddi_update_pipe_dp(encoder, crtc_state, conn_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 8f23c4d51c33..a1487539495f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14751,6 +14751,10 @@ static int intel_atomic_check(struct drm_device *dev,
> if (new_crtc_state->hw.mode.private_flags !=
> old_crtc_state->hw.mode.private_flags)
> new_crtc_state->uapi.mode_changed = true;
> +
> + /* Set mode_change to init audio code once at boot */
> + if (dev_priv->bootflag && new_crtc_state->hw.active)
> + new_crtc_state->uapi.mode_changed = true;
I would prefer to compute crtc_state->has_audio in compute_config at boot up
and then force a full modeset in intel_pipe_config_compare(), this way atomically we can force the
full modeset on boot up.
Thanks,
Anshuman Gupta.
> }
>
> ret = drm_atomic_helper_check_modeset(dev, &state->base);
> @@ -17655,11 +17659,15 @@ static void intel_update_fdi_pll_freq(struct drm_i915_private *dev_priv)
>
> static int intel_initial_commit(struct drm_device *dev)
> {
> + struct drm_i915_private *dev_priv = to_i915(dev);
> struct drm_atomic_state *state = NULL;
> struct drm_modeset_acquire_ctx ctx;
> struct intel_crtc *crtc;
> int ret = 0;
>
> + /* Set Flag to trigger modeset for audio codec init */
> + dev_priv->bootflag = true;
> +
> state = drm_atomic_state_alloc(dev);
> if (!state)
> return -ENOMEM;
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index a7ea1d855359..207196f9632b 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1210,6 +1210,9 @@ struct drm_i915_private {
> * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
> * will be rejected. Instead look for a better place.
> */
> +
> + /* Flag to trigger modeset for Audio codec init once during boot */
> + bool bootflag;
> };
>
> static inline struct drm_i915_private *to_i915(const struct drm_device *dev)
> --
> 2.22.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-03-18 12:15 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-18 11:30 [Intel-gfx] [PATCH] drm/i915/display: Trigger Modeset at boot for audio codec init Uma Shankar
2020-03-18 12:07 ` Anshuman Gupta [this message]
2020-03-18 14:02 ` Shankar, Uma
2020-03-18 12:15 ` Maarten Lankhorst
2020-03-18 14:37 ` Shankar, Uma
2020-03-19 12:11 ` Maarten Lankhorst
2020-03-18 12:23 ` [Intel-gfx] ✗ Fi.CI.BAT: failure for " Patchwork
2020-03-19 19:05 ` [Intel-gfx] [PATCH] " Souza, Jose
2020-03-20 6:19 ` Shankar, Uma
2020-03-20 15:24 ` Ville Syrjälä
2020-03-20 16:54 ` Khor, Swee Aun
2020-03-23 14:29 ` Khor, Swee Aun
2020-03-24 5:56 ` Khor, Swee Aun
2020-03-26 7:25 ` Shankar, Uma
2020-03-24 18:38 ` Kai Vehmanen
2020-03-23 16:57 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: Trigger Modeset at boot for audio codec init (rev2) Patchwork
2020-03-23 17:20 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-03-24 0:01 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-03-24 6:11 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915/display: Trigger Modeset at boot for audio codec init (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200318120716.GA27671@intel.com \
--to=anshuman.gupta@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=swee.aun.khor@intel.com \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.