Re: [PATCH v4 3/9] drivers: base: add linear ranges helpers

["gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>]

On Wed, Mar 18, 2020 at 01:42:26PM +0000, Vaittinen, Matti wrote:
> Hello Greg,
> 
> On Wed, 2020-03-18 at 14:08 +0100, Greg Kroah-Hartman wrote:
> > On Tue, Feb 25, 2020 at 10:53:01AM +0200, Matti Vaittinen wrote:
> > > Many devices have control registers which control some measurable
> > > property. Often a register contains control field so that change in
> > > this field causes linear change in the controlled property. It is
> > > not
> > > a rare case that user wants to give 'meaningful' control values and
> > > driver needs to convert them to register field values. Even more
> > > often user wants to 'see' the currently set value - again in
> > > meaningful units - and driver needs to convert the values it reads
> > > from register to these meaningful units. Examples of this include:
> > > 
> > > - regulators, voltage/current configurations
> > > - power, voltage/current configurations
> > > - clk(?) NCOs
> > > 
> > > and maybe others I can't think of right now.
> > > 
> > > Provide a linear_range helper which can do conversion from user
> > > value
> > > to register value 'selector'.
> > > 
> > > The idea here is stolen from regulator framework and patches
> > > refactoring
> > > the regulator helpers to use this are following.
> > > 
> > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > > ---
> > > 
> > > Changes since rfc-v3:
> > >   - Kerneldoc fixes
> > >   - Corrected commit message typo meaningfull => meaningful
> > > 
> > >  drivers/base/Kconfig         |   3 +
> > >  drivers/base/Makefile        |   1 +
> > >  drivers/base/linear_ranges.c | 246
> > > +++++++++++++++++++++++++++++++++++
> > 
> > Why in drivers/base/ ?
> > 
> > Why not in lib/ ?
> 
> I was pondering which of these would be better. I decided to do with
> drivers/base because - in it's current form - this is really a driver
> related stuff. I see it somehow in same position as regmap code -
> although this is just a tiny helper compared to regmap. But this also
> has pretty driver specific audience :)
> 
> And... I must admit I like things which I know. And I have been doing
> driver development and "know" a few of the driver related colleagues -
> hence working with them is easier for me ;) Getting to know the
> colleagues maintaining lib is a bit scary :] Yep, I'm Finnish if you
> happen to wonder why getting to know people is scary xD
> 
> > 
> > >  include/linux/linear_range.h |  48 +++++++
> > >  4 files changed, 298 insertions(+)
> > >  create mode 100644 drivers/base/linear_ranges.c
> > >  create mode 100644 include/linux/linear_range.h
> > > 
> > > diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
> > > index 5f0bc74d2409..636b6fa8e499 100644
> > > --- a/drivers/base/Kconfig
> > > +++ b/drivers/base/Kconfig
> > > @@ -209,4 +209,7 @@ config GENERIC_ARCH_TOPOLOGY
> > >  	  appropriate scaling, sysfs interface for reading capacity
> > > values at
> > >  	  runtime.
> > >  
> > > +config LINEAR_RANGES
> > > +	tristate
> > 
> > No help text at all???
> 
> Yes. The linear ranges has no meaning to be enabled alone. It only
> plays a role if it is used by some driver/subsystem. And
> drivers/subsystems should do
> select LINEAR_RANGES. So showing help in any config tool is not needed.
> This should actually not be visible in menuconfig or others. I think I
> have seen a few examples like this.
> 
> Ayways, I have no obejctions to adding some text if absolutely needed.
> Any suggestions for a text politely saying - "please, pretend I am not
> here" - are welcome :) (Although, I think this really does not need
> help text).

This kind of implies it needs to be in lib/ that way the needed code
links it and all should be fine.

thanks,

greg k-h