[PATCH net-next 2/2] net: dsa: sja1105: Avoid error message for unknown PHY mode on disabled ports

[Vladimir Oltean <olteanv@gmail.com>]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

When sja1105_init_mii_settings iterates over the port list, it prints
this message for disabled ports, because they don't have a valid
phy-mode:

[    4.778702] sja1105 spi2.0: Unsupported PHY mode unknown!

Use the newly introduced dsa_port_is_enabled helper to avoid this.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/dsa/sja1105/sja1105_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index d8123288c572..8152b68389a7 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -162,6 +162,9 @@ static int sja1105_init_mii_settings(struct sja1105_private *priv,
 	mii = table->entries;
 
 	for (i = 0; i < SJA1105_NUM_PORTS; i++) {
+		if (!dsa_port_is_enabled(priv->ds, i))
+			continue;
+
 		switch (ports[i].phy_mode) {
 		case PHY_INTERFACE_MODE_MII:
 			mii->xmii_mode[i] = XMII_MODE_MII;
-- 
2.17.1