Re: [PATCH v5 16/17] dt: bindings: net: add microchip,wilc1000.yaml

[Rob Herring <robh@kernel.org>]

On Wed, Mar 11, 2020 at 12:18:50PM +0000, Ajay.Kathat@microchip.com wrote:
> From: Ajay Singh <ajay.kathat@microchip.com>
> 
> This file describes the binding details to connect wilc1000 device. It's
> moved from staging to 'Documentation/devicetree/bindings/net/wireless'
> path.
> 
> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
> ---
>  .../net/wireless/microchip,wilc1000.yaml      | 72 +++++++++++++++++++
>  1 file changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
> new file mode 100644
> index 000000000000..bc6cc5d3f347
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip WILC wireless devicetree bindings
> +
> +maintainers:
> +  - Adham Abozaeid <adham.abozaeid@microchip.com>
> +  - Ajay Singh <ajay.kathat@microchip.com>
> +
> +description:
> +  The wilc1000 chips can be connected via SPI or SDIO. This document
> +  describes the binding to connect wilc devices.
> +
> +properties:
> +  compatible:
> +    const: microchip,wilc1000
> +
> +  spi-max-frequency: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    description: phandle to the clock connected on rtc clock line.
> +    maxItems: 1
> +
> +  clock-names:
> +    const: rtc
> +
> +required:
> +  - compatible
> +  - interrupts
> +
> +examples:
> +  - |
> +    spi1: spi@fc018000 {

spi {

> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      cs-gpios = <&pioB 21 0>;

Drop this. Not relevant to the example.

> +      wifi@0 {
> +        compatible = "microchip,wilc1000";
> +        spi-max-frequency = <48000000>;
> +        reg = <0>;
> +        interrupt-parent = <&pioC>;
> +        interrupts = <27 0>;
> +        clocks = <&pck1>;
> +        clock-names = "rtc";
> +      };
> +    };
> +
> +  - |
> +    mmc1: mmc@fc000000 {

Drop the label. Either drop the unit address or add a 'reg' property to 
match.

> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      pinctrl-names = "default";
> +      pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
> +      non-removable;
> +      vmmc-supply = <&vcc_mmc1_reg>;
> +      vqmmc-supply = <&vcc_3v3_reg>;
> +      bus-width = <4>;
> +      wifi@0 {
> +        compatible = "microchip,wilc1000";
> +        reg = <0>;
> +        interrupt-parent = <&pioC>;
> +        interrupts = <27 0>;
> +        clocks = <&pck1>;
> +        clock-names = "rtc";
> +      };
> +    };
> -- 
> 2.24.0