All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] configs/qemu_riscv{32, 64}_virt_defconfig: Remove BR2_TARGET_GENERIC_GETTY_PORT
Date: Sun, 22 Mar 2020 17:13:16 +0100	[thread overview]
Message-ID: <20200322161316.GI2364@scaer> (raw)
In-Reply-To: <20200322160115.GH2364@scaer>

Romain, Bin, All,

On 2020-03-22 17:01 +0100, Yann E. MORIN spake thusly:
> On 2020-03-22 16:52 +0100, Romain Naour spake thusly:
> > Le 07/03/2020 ? 13:20, Bin Meng a ?crit?:
> > > Currently BR2_TARGET_GENERIC_GETTY_PORT is set to ttyS0 in both
> > > qemu_riscv32_virt and qemu_riscv64_virt defconfig files. This
> > > limits usecases when the same one rootfs could be used on QEMU
> > > 'sifive_u' machine and SiFive HiFive Unleashed board.
> > > 
> > > Remove it so that the default boot console can be used.
> > 
> > By doing this change, we need to check if -nographic is used to start qemu (so
> > the serial port is the default console) or if console=ttyS0 is used in the
> > kernel command line.
> > 
> > riscv32 and risc64 are both using -nographic to start Qemu.
> > 
> > Your use case is similar to the one from [1]
> > 
> > [1]
> > https://git.buildroot.net/buildroot/commit/?id=131300e6f1d0745a1455d246684550e6ecb68549
> > 
> > Reviewed-by: Romain Naour <romain.naour@gmail.com>
> 
> Thanks Romain for this review (and for bringing me in!)
> 
> However, I disagree: these defconfig files are for qemu, not the real
> hardware.
> 
> Additionally, we do have a configuration for the hifive unleashed board
> already, hifive_unleashed_defconfig, which is what should be used for
> the real hardware.

Romain pointed out on IRC that this change is in fact dual-sided:

  - it allows the generic riscv defconfigs to boot on the real hardware
    HiFive Unleashed board

  - it allows the generic riscv defconfigs to boot on the emulated
    HiFive Unleashed board which is known to qemu as sifive_u.

Still, my position does not change: if one wants to boot something in
the sifive_u which emulates a HiFive Unleashed board, then one better
use the original hifive_unleashed_defconfig, rather than the generic
riscv one.

Regards,
Yann E. MORIN.

> Regards,
> Yann E. MORIN.
> 
> > Best regards,
> > Romain
> > 
> > 
> > > 
> > > Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
> > > ---
> > > 
> > >  configs/qemu_riscv32_virt_defconfig | 1 -
> > >  configs/qemu_riscv64_virt_defconfig | 1 -
> > >  2 files changed, 2 deletions(-)
> > > 
> > > diff --git a/configs/qemu_riscv32_virt_defconfig b/configs/qemu_riscv32_virt_defconfig
> > > index 914eada..093d888 100644
> > > --- a/configs/qemu_riscv32_virt_defconfig
> > > +++ b/configs/qemu_riscv32_virt_defconfig
> > > @@ -5,7 +5,6 @@ BR2_RISCV_32=y
> > >  # System
> > >  BR2_SYSTEM_DHCP="eth0"
> > >  BR2_TARGET_GENERIC_GETTY=y
> > > -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> > >  BR2_GLOBAL_PATCH_DIR="board/qemu/riscv32-virt/patches/"
> > >  
> > >  # Filesystem
> > > diff --git a/configs/qemu_riscv64_virt_defconfig b/configs/qemu_riscv64_virt_defconfig
> > > index 5c52f7a..54390fc 100644
> > > --- a/configs/qemu_riscv64_virt_defconfig
> > > +++ b/configs/qemu_riscv64_virt_defconfig
> > > @@ -5,7 +5,6 @@ BR2_RISCV_64=y
> > >  # System
> > >  BR2_SYSTEM_DHCP="eth0"
> > >  BR2_TARGET_GENERIC_GETTY=y
> > > -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> > >  
> > >  # Filesystem
> > >  BR2_TARGET_ROOTFS_EXT2=y
> > > 
> > 
> > _______________________________________________
> > buildroot mailing list
> > buildroot at busybox.net
> > http://lists.busybox.net/mailman/listinfo/buildroot
> 
> -- 
> .-----------------.--------------------.------------------.--------------------.
> |  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
> | +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
> '------------------------------^-------^------------------^--------------------'
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

  reply	other threads:[~2020-03-22 16:13 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-07 12:20 [Buildroot] [PATCH] configs/qemu_riscv{32, 64}_virt_defconfig: Remove BR2_TARGET_GENERIC_GETTY_PORT Bin Meng
2020-03-12  1:50 ` Bin Meng
2020-03-17  1:49   ` Bin Meng
2020-03-22 15:52 ` Romain Naour
2020-03-22 16:01   ` Yann E. MORIN
2020-03-22 16:13     ` Yann E. MORIN [this message]
2020-03-23  5:38       ` Bin Meng
2020-04-21 21:19 ` Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200322161316.GI2364@scaer \
    --to=yann.morin.1998@free.fr \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.