From: Vladimir Oltean <olteanv@gmail.com>
To: andrew@lunn.ch, f.fainelli@gmail.com, vivien.didelot@gmail.com,
davem@davemloft.net, jakub.kicinski@netronome.com
Cc: murali.policharla@broadcom.com, stephen@networkplumber.org,
jiri@resnulli.us, idosch@idosch.org, kuba@kernel.org,
nikolay@cumulusnetworks.com, netdev@vger.kernel.org
Subject: [PATCH v3 net-next 7/8] net: dsa: vsc73xx: make the MTU configurable
Date: Fri, 27 Mar 2020 00:40:39 +0200 [thread overview]
Message-ID: <20200326224040.32014-8-olteanv@gmail.com> (raw)
In-Reply-To: <20200326224040.32014-1-olteanv@gmail.com>
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Instead of hardcoding the MTU to the maximum value allowed by the
hardware, obey the value known by the operating system.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v3:
None.
Changes in v2:
None.
drivers/net/dsa/vitesse-vsc73xx-core.c | 30 +++++++++++++++++---------
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index 6e21a2a5cf01..19ce4aa0973b 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -664,16 +664,6 @@ static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
VSC73XX_MAC_CFG_TX_EN |
VSC73XX_MAC_CFG_RX_EN);
- /* Max length, we can do up to 9.6 KiB, so allow that.
- * According to application not "VSC7398 Jumbo Frames" setting
- * up the MTU to 9.6 KB does not affect the performance on standard
- * frames, so just enable it. It is clear from the application note
- * that "9.6 kilobytes" == 9600 bytes.
- */
- vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
- port,
- VSC73XX_MAXLEN, 9600);
-
/* Flow control for the CPU port:
* Use a zero delay pause frame when pause condition is left
* Obey pause control frames
@@ -1030,6 +1020,24 @@ static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port,
}
}
+static int vsc73xx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+ struct vsc73xx *vsc = ds->priv;
+
+ return vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
+ VSC73XX_MAXLEN, new_mtu);
+}
+
+/* According to application not "VSC7398 Jumbo Frames" setting
+ * up the MTU to 9.6 KB does not affect the performance on standard
+ * frames. It is clear from the application note that
+ * "9.6 kilobytes" == 9600 bytes.
+ */
+static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port)
+{
+ return 9600;
+}
+
static const struct dsa_switch_ops vsc73xx_ds_ops = {
.get_tag_protocol = vsc73xx_get_tag_protocol,
.setup = vsc73xx_setup,
@@ -1041,6 +1049,8 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
.get_sset_count = vsc73xx_get_sset_count,
.port_enable = vsc73xx_port_enable,
.port_disable = vsc73xx_port_disable,
+ .port_change_mtu = vsc73xx_change_mtu,
+ .port_max_mtu = vsc73xx_get_max_mtu,
};
static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
--
2.17.1
next prev parent reply other threads:[~2020-03-26 22:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-26 22:40 [PATCH v3 net-next 0/8] Configure the MTU on DSA switches Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 1/8] net: phy: bcm7xx: add jumbo frame configuration to PHY Vladimir Oltean
2020-03-26 23:17 ` Florian Fainelli
2020-03-26 22:40 ` [PATCH v3 net-next 2/8] bgmac: configure MTU and add support for frames beyond 8192 byte size Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 3/8] net: dsa: configure the MTU for switch ports Vladimir Oltean
2020-03-27 0:06 ` Andrew Lunn
2020-03-27 10:00 ` Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 4/8] net: dsa: implement auto-normalization of MTU for bridge hardware datapath Vladimir Oltean
2020-04-02 1:25 ` kbuild test robot
2020-04-02 1:25 ` kbuild test robot
2020-03-26 22:40 ` [PATCH v3 net-next 5/8] net: dsa: b53: add MTU configuration support Vladimir Oltean
2020-03-26 23:16 ` Florian Fainelli
2020-03-27 13:01 ` Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 6/8] net: dsa: sja1105: implement the port MTU callbacks Vladimir Oltean
2020-03-26 22:40 ` Vladimir Oltean [this message]
2020-03-26 22:40 ` [PATCH v3 net-next 8/8] net: dsa: felix: support changing the MTU Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200326224040.32014-8-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=idosch@idosch.org \
--cc=jakub.kicinski@netronome.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=murali.policharla@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=nikolay@cumulusnetworks.com \
--cc=stephen@networkplumber.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.