From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tom Joseph <tjoseph@cadence.com>,
Rob Herring <robh+dt@kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Andrew Murray <amurray@thegoodpenguin.co.uk>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
Mark Rutland <mark.rutland@arm.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH 1/3] dt-bindings: PCI: cadence: Deprecate inbound/outbound specific bindings
Date: Fri, 27 Mar 2020 16:17:25 +0530 [thread overview]
Message-ID: <20200327104727.4708-2-kishon@ti.com> (raw)
In-Reply-To: <20200327104727.4708-1-kishon@ti.com>
Deprecate cdns,max-outbound-regions and cdns,no-bar-match-nbits for
host mode as both these could be derived from "ranges" and "dma-ranges"
property. "cdns,max-outbound-regions" property would still be required
for EP mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../bindings/pci/cdns,cdns-pcie-ep.yaml | 2 +-
.../bindings/pci/cdns,cdns-pcie-host.yaml | 3 +--
.../devicetree/bindings/pci/cdns-pcie-ep.yaml | 25 +++++++++++++++++++
.../bindings/pci/cdns-pcie-host.yaml | 10 ++++++++
.../devicetree/bindings/pci/cdns-pcie.yaml | 8 ------
5 files changed, 37 insertions(+), 11 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
index 2996f8d4777c..50ce5d79d2c7 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -10,7 +10,7 @@ maintainers:
- Tom Joseph <tjoseph@cadence.com>
allOf:
- - $ref: "cdns-pcie.yaml#"
+ - $ref: "cdns-pcie-ep.yaml#"
- $ref: "pci-ep.yaml#"
properties:
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
index cabbe46ff578..84a8f095d031 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -45,8 +45,6 @@ examples:
#size-cells = <2>;
bus-range = <0x0 0xff>;
linux,pci-domain = <0>;
- cdns,max-outbound-regions = <16>;
- cdns,no-bar-match-nbits = <32>;
vendor-id = <0x17cd>;
device-id = <0x0200>;
@@ -57,6 +55,7 @@ examples:
ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>,
<0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
#interrupt-cells = <0x1>;
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
new file mode 100644
index 000000000000..6150a7a7bdbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence PCIe Device
+
+maintainers:
+ - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+ - $ref: "cdns-pcie.yaml#"
+
+properties:
+ cdns,max-outbound-regions:
+ description: maximum number of outbound regions
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+ default: 32
+
+required:
+ - cdns,max-outbound-regions
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
index ab6e43b636ec..3d64f85aeb39 100644
--- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@ -14,6 +14,15 @@ allOf:
- $ref: "cdns-pcie.yaml#"
properties:
+ cdns,max-outbound-regions:
+ description: maximum number of outbound regions
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+ default: 32
+ deprecated: true
+
cdns,no-bar-match-nbits:
description:
Set into the no BAR match register to configure the number of least
@@ -23,5 +32,6 @@ properties:
minimum: 0
maximum: 64
default: 32
+ deprecated: true
msi-parent: true
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
index 6887ccc339cc..02553d5e6c51 100644
--- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
@@ -10,14 +10,6 @@ maintainers:
- Tom Joseph <tjoseph@cadence.com>
properties:
- cdns,max-outbound-regions:
- description: maximum number of outbound regions
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 1
- maximum: 32
- default: 32
-
phys:
description:
One per lane if more than one in the list. If only one PHY listed it must
--
2.17.1
next prev parent reply other threads:[~2020-03-27 10:47 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-27 10:47 [PATCH 0/3] PCI: cadence: Deprecate inbound/outbound specific bindings Kishon Vijay Abraham I
2020-03-27 10:47 ` Kishon Vijay Abraham I [this message]
2020-03-30 16:01 ` [PATCH 1/3] dt-bindings: " Rob Herring
2020-03-31 3:38 ` Kishon Vijay Abraham I
2020-03-31 16:45 ` Rob Herring
2020-04-01 3:08 ` Kishon Vijay Abraham I
2020-04-03 5:42 ` Kishon Vijay Abraham I
2020-04-10 16:38 ` Rob Herring
2020-04-11 2:21 ` Kishon Vijay Abraham I
2020-03-27 10:47 ` [PATCH 2/3] PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property Kishon Vijay Abraham I
2020-03-27 14:52 ` Bjorn Helgaas
2020-03-27 10:47 ` [PATCH 3/3] PCI: Cadence: Remove using "cdns,max-outbound-regions" DT property Kishon Vijay Abraham I
2020-03-27 14:54 ` Bjorn Helgaas
2020-03-27 15:27 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200327104727.4708-2-kishon@ti.com \
--to=kishon@ti.com \
--cc=amurray@thegoodpenguin.co.uk \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tjoseph@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.