From: "Pali Rohár" <pali@kernel.org>
To: u-boot@lists.denx.de
Subject: [PATCH 09/11] Nokia RX-51: Disable some unused features to decrease size of u-boot binary
Date: Wed, 1 Apr 2020 00:35:16 +0200 [thread overview]
Message-ID: <20200331223518.10936-10-pali@kernel.org> (raw)
In-Reply-To: <20200331223518.10936-1-pali@kernel.org>
Maximal allowed size of U-Boot binary for Nokia N900 is just 262144 bytes.
Signed-off-by: Pali Roh?r <pali@kernel.org>
---
configs/nokia_rx51_defconfig | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
index fc92c3affc..41722725e6 100644
--- a/configs/nokia_rx51_defconfig
+++ b/configs/nokia_rx51_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_FAT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
# CONFIG_NET is not set
CONFIG_TWL4030_LED=y
+# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_CONS_INDEX=3
CONFIG_SYS_NS16550=y
@@ -46,3 +47,18 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_RAW_NAND is not set
CONFIG_CMD_MTD=y
CONFIG_CMD_ONENAND=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_GZIP is not set
+# CONFIG_FIT is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_FLASH is not set
--
2.20.1
next prev parent reply other threads:[~2020-03-31 22:35 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-31 22:35 [PATCH 00/11] Fixes for Nokia RX-51 Pali Rohár
2020-03-31 22:35 ` [PATCH 01/11] Nokia RX-51: Update my email address Pali Rohár
2020-03-31 22:35 ` [PATCH 02/11] Nokia RX-51: Add README.nokia_rx51 file to MAINTAINERS Pali Rohár
2020-03-31 22:35 ` [PATCH 03/11] Nokia RX-51: Move comment about CONFIG_SYS_TEXT_BASE to correct place Pali Rohár
2020-03-31 22:35 ` [PATCH 04/11] Nokia RX-51: Move code from defconfig back to C header file Pali Rohár
2020-03-31 22:35 ` [PATCH 05/11] Nokia RX-51: Revert back onenand defitions Pali Rohár
2020-03-31 22:35 ` [PATCH 06/11] Nokia RX-51: Remove PART* macros Pali Rohár
2020-03-31 22:35 ` [PATCH 07/11] Nokia RX-51: Remember setup_console_atag option Pali Rohár
2020-03-31 22:35 ` [PATCH 08/11] Nokia RX-51: Enable CONFIG_CONSOLE_MUX Pali Rohár
2020-04-14 10:19 ` Lokesh Vutla
2020-03-31 22:35 ` Pali Rohár [this message]
2020-03-31 22:35 ` [PATCH 10/11] Nokia RX-51: Update README.nokia_rx51 Pali Rohár
2020-03-31 22:35 ` [PATCH 11/11] Nokia RX-51: Add automated test for running RX-51 build in qemu Pali Rohár
2020-04-14 10:40 ` Pali Rohár
2020-04-21 14:55 ` Lokesh Vutla
2020-04-21 17:36 ` Simon Glass
2020-04-21 20:12 ` Tom Rini
2020-04-21 20:37 ` Simon Glass
2020-04-21 20:46 ` Tom Rini
2020-04-21 20:49 ` Simon Glass
2020-04-21 20:51 ` Tom Rini
2020-04-21 21:34 ` Pali Rohár
2020-04-21 23:24 ` Tom Rini
2020-04-23 7:34 ` Pali Rohár
2020-04-23 12:24 ` Tom Rini
2020-04-23 17:48 ` Pali Rohár
2020-04-25 9:00 ` [PATCH v2] " Pali Rohár
2020-04-27 8:40 ` Pali Rohár
2020-04-27 18:00 ` Tom Rini
2020-04-28 7:37 ` Pali Rohár
2020-05-08 12:52 ` Pali Rohár
2020-05-08 13:10 ` Tom Rini
2020-05-09 16:28 ` Lokesh Vutla
2020-05-09 16:35 ` Pali Rohár
2020-05-09 20:56 ` Tom Rini
2020-05-14 22:41 ` Pali Rohár
2020-05-15 0:01 ` Tom Rini
2020-05-15 7:33 ` Pali Rohár
2020-05-15 13:20 ` Tom Rini
2020-05-15 13:46 ` Pali Rohár
2020-05-15 13:48 ` Tom Rini
2020-05-15 13:51 ` Pali Rohár
2020-05-15 13:53 ` Tom Rini
2020-05-15 13:58 ` Pali Rohár
2020-05-15 14:16 ` Tom Rini
2020-05-15 17:40 ` Pali Rohár
2020-05-15 18:34 ` Tom Rini
2020-05-17 12:31 ` Pali Rohár
2020-05-17 12:38 ` [PATCH v3] " Pali Rohár
2020-05-26 9:18 ` Pali Rohár
2020-05-26 9:22 ` Lokesh Vutla
2020-05-26 9:32 ` Pali Rohár
2020-05-26 9:33 ` Lokesh Vutla
2020-04-21 21:03 ` [PATCH 11/11] " Pali Rohár
2020-04-21 20:53 ` Pali Rohár
2020-03-31 22:42 ` U-Boot is broken on real N900 HW (Was: Re: [PATCH 00/11] Fixes for Nokia RX-51) Pali Rohár
[not found] ` <3c7dda52-10b3-e8c3-a382-785c80f124e7@wizzup.org>
2020-04-02 18:42 ` U-Boot is broken on real N900 HW Pali Rohár
2020-04-25 10:42 ` Pali Rohár
2020-04-25 11:36 ` Adam Ford
2020-04-25 11:50 ` Pali Rohár
2020-04-25 12:00 ` Adam Ford
2020-04-25 12:11 ` Pali Rohár
2020-04-25 23:54 ` U-Boot i2c bus num 1 is broken on Nokia N900 (Was: Re: U-Boot is broken on real N900 HW) Pali Rohár
2020-04-27 7:03 ` Heiko Schocher
2020-10-26 21:48 ` U-Boot i2c bus num 1 is broken on Nokia N900 Pali Rohár
2020-10-28 5:42 ` Heiko Schocher
2020-10-28 10:46 ` Pali Rohár
2020-10-29 7:51 ` Ivaylo Dimitrov
2020-10-29 9:32 ` Heiko Schocher
2020-10-29 9:36 ` Pali Rohár
2020-10-30 7:00 ` Ivaylo Dimitrov
2020-10-30 7:24 ` Heiko Schocher
2020-10-31 11:47 ` Ivaylo Dimitrov
2020-11-02 7:13 ` Heiko Schocher
2020-04-25 12:07 ` U-Boot is broken on real N900 HW Pali Rohár
2020-04-25 13:19 ` Pali Rohár
2020-04-25 13:48 ` Pali Rohár
2020-04-25 21:26 ` Bisected: mmc cause reboot loops on N900 (Was: Re: U-Boot is broken on real N900 HW) Pali Rohár
2020-04-25 22:20 ` Pali Rohár
2020-04-25 22:29 ` Bisected: omap_hsmmc 3.3V IO voltage incompatible with N900 (Was: Re: Bisected: mmc cause reboot loops on N900) Pali Rohár
2020-05-07 13:40 ` Faiz Abbas
2020-05-07 15:19 ` Pali Rohár
2020-05-26 17:49 ` Pali Rohár
2020-06-12 13:03 ` Pali Rohár
2020-07-01 8:32 ` Pali Rohár
2020-07-01 8:51 ` Faiz Abbas
2020-05-03 21:31 ` Bisected: mmc cause reboot loops on N900 Pali Rohár
2020-04-26 17:13 ` Bisected: mmc cause reboot loops on N900 (Was: Re: U-Boot is broken on real N900 HW) Pavel Machek
2020-04-06 20:12 ` U-Boot is broken on real N900 HW (Was: Re: [PATCH 00/11] Fixes for Nokia RX-51) Pavel Machek
2020-04-06 22:27 ` Pali Rohár
2020-04-13 10:41 ` [PATCH 00/11] Fixes for Nokia RX-51 Pali Rohár
2020-04-14 10:23 ` Lokesh Vutla
2020-04-14 10:31 ` Pali Rohár
2020-04-14 10:44 ` Lokesh Vutla
2020-04-14 11:17 ` Pali Rohár
2020-04-14 11:51 ` Lokesh Vutla
2020-04-14 12:01 ` Pali Rohár
2020-04-16 21:57 ` Pali Rohár
2020-04-20 8:12 ` Lokesh Vutla
2020-04-20 23:21 ` Pali Rohár
2020-05-11 12:47 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200331223518.10936-10-pali@kernel.org \
--to=pali@kernel.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.