All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vincent Whitchurch <vincent.whitchurch@axis.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: "rui.zhang@intel.com" <rui.zhang@intel.com>,
	"amit.kucheria@verdurent.com" <amit.kucheria@verdurent.com>,
	"open list:THERMAL" <linux-pm@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] thermal: core: Send a sysfs notification on trip points
Date: Fri, 3 Apr 2020 16:40:09 +0200	[thread overview]
Message-ID: <20200403144009.szjoss5ecleisg2f@axis.com> (raw)
In-Reply-To: <20200402142116.22869-1-daniel.lezcano@linaro.org>

On Thu, Apr 02, 2020 at 04:21:15PM +0200, Daniel Lezcano wrote:
> Currently the userspace has no easy way to get notified when a
> specific trip point was crossed. There are a couple of approaches:
> 
> - the userspace polls the sysfs temperature with usually an
>   unacceptable delay between the trip temperature point crossing and
>   the moment it is detected, or a high polling rate with an
>   unacceptable number of wakeup events.
> 
> - the thermal zone is set to be managed by an userspace governor in
>   order to receive the uevent even if the thermal zone needs to be
>   managed by another governor.
> 
> These changes allow to send a sysfs notification on the
> trip_point_*_temp when the temperature is getting higher than the trip
> point temperature. By this way, the userspace can be notified
> everytime when the trip point is crossed, this is useful for the
> thermal Android HAL or for notification to be sent via d-bus.
> 
> That allows the userspace to manage the applications based on specific
> alerts on different thermal zones to mitigate the skin temperature,
> letting the kernel governors handle the high temperature for hardware
> like the CPU, the GPU or the modem.
> 
> The temperature can be oscillating around a trip point and the event
> will be sent multiple times. It is up to the userspace to deal with
> this situation.

The actual temperature value would also be interesting.  Is there a way
for userspace to obtain it in a race-free manner when it is notified
that the trip point has been crossed?

> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
> index c06550930979..3cbdd20252ab 100644
> --- a/drivers/thermal/thermal_core.c
> +++ b/drivers/thermal/thermal_core.c
> @@ -407,6 +407,19 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
>  	}
>  }
>  
> +static int thermal_trip_crossed(struct thermal_zone_device *tz, int trip)
> +{
> +	int trip_temp;
> +
> +	tz->ops->get_trip_temp(tz, trip, &trip_temp);
> +
> +	if (tz->last_temperature == THERMAL_TEMP_INVALID)
> +		return 0;
> +
> +	return ((tz->last_temperature < trip_temp)) &&
> +		(tz->temperature >= trip_temp));

 drivers/thermal/thermal_core.c: In function ‘thermal_trip_crossed’:
 drivers/thermal/thermal_core.c:425:33: error: expected ‘;’ before ‘)’ token
    (tz->temperature >= trip_temp));
                                  ^
 drivers/thermal/thermal_core.c:425:33: error: expected statement before ‘)’ token

> +}
> +
>  static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
>  {
>  	enum thermal_trip_type type;
> @@ -417,6 +430,16 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
>  
>  	tz->ops->get_trip_type(tz, trip, &type);
>  
> +	/*
> +	 * This condition will be true everytime the temperature is
> +	 * greater than the trip point and the previous temperature
> +	 * was below. In this case notify the userspace via a sysfs
> +	 * event on the trip point.
> +	 */
> +	if (thermal_trip_crossed(tz, trip))
> +		sysfs_notify(&tz->device.kobj, NULL,
> +			     tz->trip_temp_attrs[trip].attr.attr.name);

Normally sysfs_notify() is used to notify userspace that the value of
the sysfs file has changed, but in this case it's being used on a sysfs
file whose value never changes.  I don't know if there are other drivers
that do something similar.

  reply	other threads:[~2020-04-03 14:40 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-02 13:52 [PATCH] thermal: Add ratelimited print for HOT trip point Vincent Whitchurch
2020-04-02 14:20 ` Daniel Lezcano
2020-04-02 14:21   ` [PATCH] thermal: core: Send a sysfs notification on trip points Daniel Lezcano
2020-04-03 14:40     ` Vincent Whitchurch [this message]
2020-04-03 15:26       ` Daniel Lezcano
2020-04-06  7:45         ` Vincent Whitchurch
2020-04-06  9:45           ` Daniel Lezcano
2020-04-06  9:58             ` Vincent Whitchurch
2020-04-06  9:25     ` Amit Kucheria
2020-04-06  9:53       ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200403144009.szjoss5ecleisg2f@axis.com \
    --to=vincent.whitchurch@axis.com \
    --cc=amit.kucheria@verdurent.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.