Re: [PATCH v3 2/2] arm64: dts: qcom: sm8150: Add USB and PHY device nodes

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Tue 07 Apr 15:24 PDT 2020, Wesley Cheng wrote:

> From: Jack Pham <jackp@codeaurora.org>
> 
> Add device nodes for the USB3 controller, QMP SS PHY and
> SNPS HS PHY.
> 

Thanks for the respin Wesley, and thanks for testing Vinod. Just spotted
one little details below.

> Signed-off-by: Jack Pham <jackp@codeaurora.org>
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Tested-by: Vinod Koul <vinod.koul@linaro.org>
> ---

Please make a habit of documenting what changed since the previous
version here, below the ---.

>  arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 21 ++++++++
>  arch/arm64/boot/dts/qcom/sm8150.dtsi    | 92 +++++++++++++++++++++++++++++++++
>  2 files changed, 113 insertions(+)
[..]
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
[..]
> +		usb_1_hsphy: phy@88e2000 {
> +			compatible = "qcom,usb-snps-hs-7nm-phy",
> +							"qcom,sm8150-usb-hs-phy";
[..]
> +		usb_1: usb@a6f8800 {
> +			compatible = "qcom,sdm845-dwc3", "qcom,dwc3";

The first cell here should be qcom,sm8150-dwc3. The Linux driver will
"fall through" and match on the less specific "qcom,dwc3", but if we in
the future realize that we have sm8150 specific behavior/quirks we can
make the driver match on the more specific one to implement this.

And similarly the order of the compatibles in &usb_1_hsphy should be
reversed as well.

Regards,
Bjorn