From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
Dongjin Kim <tobetter@gmail.com>,
Jianxin Pan <jianxin.pan@amlogic.com>,
Thinh Nguyen <thinhn@synopsys.com>,
Jun Li <lijun.kernel@gmail.com>, Tim <elatllat@gmail.com>,
Felipe Balbi <balbi@kernel.org>, Sasha Levin <sashal@kernel.org>,
linux-usb@vger.kernel.org
Subject: [PATCH AUTOSEL 5.5 45/56] usb: dwc3: core: add support for disabling SS instances in park mode
Date: Thu, 9 Apr 2020 23:47:49 -0400 [thread overview]
Message-ID: <20200410034800.8381-45-sashal@kernel.org> (raw)
In-Reply-To: <20200410034800.8381-1-sashal@kernel.org>
From: Neil Armstrong <narmstrong@baylibre.com>
[ Upstream commit 7ba6b09fda5e0cb741ee56f3264665e0edc64822 ]
In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
usb 2-1.1-port1: cannot reset (err = -22)
Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"
Synopsys explains:
The GUCTL1.PARKMODE_DISABLE_SS is only available in
dwc_usb3 controller running in host mode.
This should not be set for other IPs.
This can be disabled by default based on IP, but I recommend to have a
property to enable this feature for devices that need this.
CC: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/dwc3/core.c | 5 +++++
drivers/usb/dwc3/core.h | 4 ++++
2 files changed, 9 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 1d85c42b9c674..43bd5b1ea9e2c 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1029,6 +1029,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
if (dwc->dis_tx_ipgap_linecheck_quirk)
reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
+ if (dwc->parkmode_disable_ss_quirk)
+ reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
+
dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
}
@@ -1342,6 +1345,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
"snps,dis-del-phy-power-chg-quirk");
dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
"snps,dis-tx-ipgap-linecheck-quirk");
+ dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
+ "snps,parkmode-disable-ss-quirk");
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 77c4a9abe3652..3ecc69c5b150f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -249,6 +249,7 @@
#define DWC3_GUCTL_HSTINAUTORETRY BIT(14)
/* Global User Control 1 Register */
+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17)
#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28)
#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)
@@ -1024,6 +1025,8 @@ struct dwc3_scratchpad_array {
* change quirk.
* @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
* check during HS transmit.
+ * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
+ * instances in park mode.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
@@ -1215,6 +1218,7 @@ struct dwc3 {
unsigned dis_u2_freeclk_exists_quirk:1;
unsigned dis_del_phy_power_chg_quirk:1;
unsigned dis_tx_ipgap_linecheck_quirk:1;
+ unsigned parkmode_disable_ss_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
--
2.20.1
next prev parent reply other threads:[~2020-04-10 3:58 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-10 3:47 [PATCH AUTOSEL 5.5 01/56] cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 02/56] EDAC/mc: Report "unknown memory" on too many DIMM labels found Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 03/56] usb: ucsi: ccg: disable runtime pm during fw flashing Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 04/56] staging: wilc1000: avoid double unlocking of 'wilc->hif_cs' mutex Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 05/56] media: vimc: streamer: fix memory leak in vimc subdevs if kthread_run fails Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 06/56] media: venus: hfi_parser: Ignore HEVC encoding for V1 Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 07/56] firmware: arm_sdei: fix double-lock on hibernate with shared events Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 08/56] driver core: Reevaluate dev->links.need_for_probe as suppliers are added Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 09/56] sched/vtime: Prevent unstable evaluation of WARN(vtime->state) Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 10/56] null_blk: Fix the null_add_dev() error path Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 11/56] blk-mq: Fix a recently introduced regression in blk_mq_realloc_hw_ctxs() Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 12/56] null_blk: Handle null_add_dev() failures properly Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 13/56] null_blk: fix spurious IO errors after failed past-wp access Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 14/56] media: imx: imx7_mipi_csis: Power off the source when stopping streaming Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 15/56] media: imx: imx7-media-csi: Fix video field handling Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 16/56] xhci: bail out early if driver can't accress host in resume Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 17/56] ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add() Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 18/56] x86: Don't let pgprot_modify() change the page encryption bit Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 19/56] dma-mapping: Fix dma_pgprot() for unencrypted coherent pages Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 20/56] block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 21/56] debugfs: Check module state before warning in {full/open}_proxy_open() Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 22/56] spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 23/56] irqchip/versatile-fpga: Handle chained IRQs properly Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 24/56] time/sched_clock: Expire timer in hardirq context Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 25/56] media: allegro: fix type of gop_length in channel_create message Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 26/56] sched: Avoid scale real weight down to zero Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 27/56] sched/fair: Fix condition of avg_load calculation Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 28/56] selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 29/56] PCI/switchtec: Fix init_completion race condition with poll_wait() Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 30/56] block, bfq: move forward the getting of an extra ref in bfq_bfqq_move Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 31/56] media: i2c: video-i2c: fix build errors due to 'imply hwmon' Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 32/56] libata: Remove extra scsi_host_put() in ata_scsi_add_hosts() Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 33/56] pstore/platform: fix potential mem leak if pstore_init_fs failed Sasha Levin
2020-04-10 3:47 ` [Cluster-devel] [PATCH AUTOSEL 5.5 34/56] gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` [Cluster-devel] [PATCH AUTOSEL 5.5 35/56] gfs2: Don't demote a glock until its revokes are written Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 36/56] cpufreq: imx6q: fix error handling Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 37/56] x86/boot: Use unsigned comparison for addresses Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 38/56] efi/x86: Ignore the memory attributes table on i386 Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 39/56] genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy() Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 40/56] blk-mq: Keep set->nr_hw_queues and set->map[].nr_queues in sync Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 41/56] block: Fix use-after-free issue accessing struct io_cq Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 42/56] block, zoned: fix integer overflow with BLKRESETZONE et al Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 43/56] media: mtk-vpu: avoid unaligned access to DTCM buffer Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 44/56] media: i2c: ov5695: Fix power on and off sequences Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` Sasha Levin
2020-04-10 3:47 ` Sasha Levin [this message]
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 46/56] irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependency Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 47/56] md: check arrays is suspended in mddev_detach before call quiesce operations Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 48/56] firmware: fix a double abort case with fw_load_sysfs_fallback Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 49/56] spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 50/56] locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps() Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 51/56] block, bfq: fix use-after-free in bfq_idle_slice_timer_body Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 52/56] btrfs: hold a ref on the root in btrfs_recover_relocation Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 53/56] btrfs: qgroup: ensure qgroup_rescan_running is only set when the worker is at least queued Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 54/56] btrfs: remove a BUG_ON() from merge_reloc_roots() Sasha Levin
2020-04-10 3:47 ` [PATCH AUTOSEL 5.5 55/56] btrfs: restart relocate_tree_blocks properly Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.5 56/56] btrfs: track reloc roots based on their commit root bytenr Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200410034800.8381-45-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=balbi@kernel.org \
--cc=elatllat@gmail.com \
--cc=jianxin.pan@amlogic.com \
--cc=lijun.kernel@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=stable@vger.kernel.org \
--cc=thinhn@synopsys.com \
--cc=tobetter@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.