Re: [PATCH net-next v2 3/3] net: phy: marvell10g: place in powersave mode at probe

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

On Fri, Apr 10, 2020 at 06:07:46PM +0200, Matteo Croce wrote:
> On Fri, Apr 10, 2020 at 6:04 PM Russell King - ARM Linux admin
> <linux@armlinux.org.uk> wrote:
> >
> > On Fri, Apr 10, 2020 at 05:18:41PM +0200, Matteo Croce wrote:
> > > On Fri, Apr 10, 2020 at 5:16 PM Russell King - ARM Linux admin
> > > <linux@armlinux.org.uk> wrote:
> > > >
> > > > On Fri, Apr 10, 2020 at 04:59:44PM +0200, Matteo Croce wrote:
> > > > > On Fri, Apr 10, 2020 at 4:50 PM Russell King - ARM Linux admin
> > > > > <linux@armlinux.org.uk> wrote:
> > > > > >
> > > > > > On Fri, Apr 10, 2020 at 04:39:48PM +0200, Matteo Croce wrote:
> > > > > # ./mii-diag eth0 -p 32769
> > > > > Using the specified MII PHY index 32769.
> > > > > Basic registers of MII PHY #32769:  2040 0082 002b 09ab 0071 009a c000 0009.
> > > > >  Basic mode control register 0x2040: Auto-negotiation disabled, with
> > > > >  Speed fixed at 100 mbps, half-duplex.
> > > > >  Basic mode status register 0x0082 ... 0082.
> > > > >    Link status: not established.
> > > > >    *** Link Jabber! ***
> > > > >  Your link partner is generating 100baseTx link beat  (no autonegotiation).
> > > > >    End of basic transceiver information.
> > > > >
> > > > > root@macchiatobin:~# ip link show dev eth0
> > > > > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
> > > > > mode DEFAULT group default qlen 2048
> > > > >     link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff
> > > > >
> > > > > But no traffic in any direction
> > > >
> > > > So you have the same version PHY hardware as I do.
> > > >
> > > > So, we need further diagnosis, which isn't possible without a more
> > > > advanced mii-diag tool - I'm sorting that out now, and will provide
> > > > a link to a git repo later this afternoon.
> > > >
> > >
> > > Ok, I'll wait for the tool
> >
> > Okay, please give this a go:
> >
> >         git://git.armlinux.org.uk/~rmk/mii-diag/
> >
> > Please send me the full output from:
> >
> > # ./mii-diag eth0 -v -p 32768
> >
> 
> Hi,
> 
> here it is:

Thanks.  It seems that the PHY is reporting that everything is fine,
all the various blocks associated with the SFP+ cage are reporting
that link is established, and link is established with the host.

I wonder - can you tcpdump to see whether any traffic is being
received at either end of the link, in case it's only one direction
that is a problem?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up