All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: dwagner@suse.de, maier@linux.ibm.com, bvanassche@acm.org,
	herbszt@gmx.de, natechancellor@gmail.com, rdunlap@infradead.org,
	hare@suse.de, James Smart <jsmart2021@gmail.com>,
	Ram Vegesna <ram.vegesna@broadcom.com>
Subject: [PATCH v3 27/31] elx: efct: xport and hardware teardown routines
Date: Sat, 11 Apr 2020 20:32:59 -0700	[thread overview]
Message-ID: <20200412033303.29574-28-jsmart2021@gmail.com> (raw)
In-Reply-To: <20200412033303.29574-1-jsmart2021@gmail.com>

This patch continues the efct driver population.

This patch adds driver definitions for:
Routines to detach xport and hardware objects.

Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>

---
v3:
   Removed old patch 28 and merged with 27
---
 drivers/scsi/elx/efct/efct_hw.c    | 333 +++++++++++++++++++++++++++++++++++++
 drivers/scsi/elx/efct/efct_hw.h    |  31 ++++
 drivers/scsi/elx/efct/efct_xport.c | 291 ++++++++++++++++++++++++++++++++
 3 files changed, 655 insertions(+)

diff --git a/drivers/scsi/elx/efct/efct_hw.c b/drivers/scsi/elx/efct/efct_hw.c
index ca2fd237c7d6..a007ca98895d 100644
--- a/drivers/scsi/elx/efct/efct_hw.c
+++ b/drivers/scsi/elx/efct/efct_hw.c
@@ -3503,3 +3503,336 @@ efct_hw_get_host_stats(struct efct_hw *hw, u8 cc,
 
 	return rc;
 }
+
+static int
+efct_hw_cb_port_control(struct efct_hw *hw, int status, u8 *mqe,
+			void  *arg)
+{
+	kfree(mqe);
+	return EFC_SUCCESS;
+}
+
+/* Control a port (initialize, shutdown, or set link configuration) */
+enum efct_hw_rtn
+efct_hw_port_control(struct efct_hw *hw, enum efct_hw_port ctrl,
+		     uintptr_t value,
+		void (*cb)(int status, uintptr_t value, void *arg),
+		void *arg)
+{
+	enum efct_hw_rtn rc = EFCT_HW_RTN_ERROR;
+
+	switch (ctrl) {
+	case EFCT_HW_PORT_INIT:
+	{
+		u8	*init_link;
+		u32 speed = 0;
+		u8 reset_alpa = 0;
+
+		u8	*cfg_link;
+
+		cfg_link = kmalloc(SLI4_BMBX_SIZE, GFP_ATOMIC);
+		if (!cfg_link)
+			return EFCT_HW_RTN_NO_MEMORY;
+
+		if (!sli_cmd_config_link(&hw->sli, cfg_link,
+					SLI4_BMBX_SIZE))
+			rc = efct_hw_command(hw, cfg_link,
+					     EFCT_CMD_NOWAIT,
+					     efct_hw_cb_port_control,
+					     NULL);
+
+		if (rc != EFCT_HW_RTN_SUCCESS) {
+			kfree(cfg_link);
+			efc_log_err(hw->os, "CONFIG_LINK failed\n");
+			break;
+		}
+		speed = hw->config.speed;
+		reset_alpa = (u8)(value & 0xff);
+
+		/* Allocate a new buffer for the init_link command */
+		init_link = kmalloc(SLI4_BMBX_SIZE, GFP_ATOMIC);
+		if (!init_link)
+			return EFCT_HW_RTN_NO_MEMORY;
+
+		rc = EFCT_HW_RTN_ERROR;
+		if (!sli_cmd_init_link(&hw->sli, init_link, SLI4_BMBX_SIZE,
+				      speed, reset_alpa))
+			rc = efct_hw_command(hw, init_link, EFCT_CMD_NOWAIT,
+					     efct_hw_cb_port_control, NULL);
+		/* Free buffer on error, since no callback is coming */
+		if (rc != EFCT_HW_RTN_SUCCESS) {
+			kfree(init_link);
+			efc_log_err(hw->os, "INIT_LINK failed\n");
+		}
+		break;
+	}
+	case EFCT_HW_PORT_SHUTDOWN:
+	{
+		u8	*down_link;
+
+		down_link = kmalloc(SLI4_BMBX_SIZE, GFP_ATOMIC);
+		if (!down_link)
+			return EFCT_HW_RTN_NO_MEMORY;
+
+		if (!sli_cmd_down_link(&hw->sli, down_link, SLI4_BMBX_SIZE))
+			rc = efct_hw_command(hw, down_link, EFCT_CMD_NOWAIT,
+					     efct_hw_cb_port_control, NULL);
+		/* Free buffer on error, since no callback is coming */
+		if (rc != EFCT_HW_RTN_SUCCESS) {
+			kfree(down_link);
+			efc_log_err(hw->os, "DOWN_LINK failed\n");
+		}
+		break;
+	}
+	default:
+		efc_log_test(hw->os, "unhandled control %#x\n", ctrl);
+		break;
+	}
+
+	return rc;
+}
+
+enum efct_hw_rtn
+efct_hw_teardown(struct efct_hw *hw)
+{
+	u32	i = 0;
+	u32	iters = 10;
+	u32	max_rpi;
+	u32 destroy_queues;
+	u32 free_memory;
+	struct efc_dma *dma;
+	struct efct *efct = hw->os;
+
+	destroy_queues = (hw->state == EFCT_HW_STATE_ACTIVE);
+	free_memory = (hw->state != EFCT_HW_STATE_UNINITIALIZED);
+
+	/* Cancel Sliport Healthcheck */
+	if (hw->sliport_healthcheck) {
+		hw->sliport_healthcheck = 0;
+		efct_hw_config_sli_port_health_check(hw, 0, 0);
+	}
+
+	if (hw->state != EFCT_HW_STATE_QUEUES_ALLOCATED) {
+		hw->state = EFCT_HW_STATE_TEARDOWN_IN_PROGRESS;
+
+		efct_hw_flush(hw);
+
+		/*
+		 * If there are outstanding commands, wait for them to complete
+		 */
+		while (!list_empty(&hw->cmd_head) && iters) {
+			mdelay(10);
+			efct_hw_flush(hw);
+			iters--;
+		}
+
+		if (list_empty(&hw->cmd_head))
+			efc_log_debug(hw->os,
+				       "All commands completed on MQ queue\n");
+		else
+			efc_log_debug(hw->os,
+				       "Some cmds still pending on MQ queue\n");
+
+		/* Cancel any remaining commands */
+		efct_hw_command_cancel(hw);
+	} else {
+		hw->state = EFCT_HW_STATE_TEARDOWN_IN_PROGRESS;
+	}
+
+	max_rpi = hw->sli.qinfo.max_qcount[SLI_RSRC_RPI];
+	if (hw->rpi_ref) {
+		for (i = 0; i < max_rpi; i++) {
+			u32 count;
+
+			count = atomic_read(&hw->rpi_ref[i].rpi_count);
+			if (count)
+				efc_log_debug(hw->os,
+					       "non-zero ref [%d]=%d\n",
+					       i, count);
+		}
+		kfree(hw->rpi_ref);
+		hw->rpi_ref = NULL;
+	}
+
+	dma_free_coherent(&efct->pcidev->dev,
+			  hw->rnode_mem.size, hw->rnode_mem.virt,
+			  hw->rnode_mem.phys);
+	memset(&hw->rnode_mem, 0, sizeof(struct efc_dma));
+
+	if (hw->io) {
+		for (i = 0; i < hw->config.n_io; i++) {
+			if (hw->io[i] && hw->io[i]->sgl &&
+			    hw->io[i]->sgl->virt) {
+				dma_free_coherent(&efct->pcidev->dev,
+						  hw->io[i]->sgl->size,
+						  hw->io[i]->sgl->virt,
+						  hw->io[i]->sgl->phys);
+				memset(&hw->io[i]->sgl, 0,
+				       sizeof(struct efc_dma));
+			}
+			kfree(hw->io[i]);
+			hw->io[i] = NULL;
+		}
+		kfree(hw->io);
+		hw->io = NULL;
+		kfree(hw->wqe_buffs);
+		hw->wqe_buffs = NULL;
+	}
+
+	dma = &hw->xfer_rdy;
+	dma_free_coherent(&efct->pcidev->dev,
+			  dma->size, dma->virt, dma->phys);
+	memset(dma, 0, sizeof(struct efc_dma));
+
+	dma = &hw->dump_sges;
+	dma_free_coherent(&efct->pcidev->dev,
+			  dma->size, dma->virt, dma->phys);
+	memset(dma, 0, sizeof(struct efc_dma));
+
+	dma = &hw->loop_map;
+	dma_free_coherent(&efct->pcidev->dev,
+			  dma->size, dma->virt, dma->phys);
+	memset(dma, 0, sizeof(struct efc_dma));
+
+	for (i = 0; i < hw->wq_count; i++)
+		sli_queue_free(&hw->sli, &hw->wq[i], destroy_queues,
+			       free_memory);
+
+	for (i = 0; i < hw->rq_count; i++)
+		sli_queue_free(&hw->sli, &hw->rq[i], destroy_queues,
+			       free_memory);
+
+	for (i = 0; i < hw->mq_count; i++)
+		sli_queue_free(&hw->sli, &hw->mq[i], destroy_queues,
+			       free_memory);
+
+	for (i = 0; i < hw->cq_count; i++)
+		sli_queue_free(&hw->sli, &hw->cq[i], destroy_queues,
+			       free_memory);
+
+	for (i = 0; i < hw->eq_count; i++)
+		sli_queue_free(&hw->sli, &hw->eq[i], destroy_queues,
+			       free_memory);
+
+	/* Free rq buffers */
+	efct_hw_rx_free(hw);
+
+	efct_hw_queue_teardown(hw);
+
+	if (sli_teardown(&hw->sli))
+		efc_log_err(hw->os, "SLI teardown failed\n");
+
+	/* record the fact that the queues are non-functional */
+	hw->state = EFCT_HW_STATE_UNINITIALIZED;
+
+	/* free sequence free pool */
+	kfree(hw->seq_pool);
+	hw->seq_pool = NULL;
+
+	/* free hw_wq_callback pool */
+	efct_hw_reqtag_pool_free(hw);
+
+	/* Mark HW setup as not having been called */
+	hw->hw_setup_called = false;
+
+	return EFCT_HW_RTN_SUCCESS;
+}
+
+static enum efct_hw_rtn
+efct_hw_sli_reset(struct efct_hw *hw, enum efct_hw_reset reset,
+		  enum efct_hw_state prev_state)
+{
+	enum efct_hw_rtn rc = EFCT_HW_RTN_SUCCESS;
+
+	switch (reset) {
+	case EFCT_HW_RESET_FUNCTION:
+		efc_log_debug(hw->os, "issuing function level reset\n");
+		if (sli_reset(&hw->sli)) {
+			efc_log_err(hw->os, "sli_reset failed\n");
+			rc = EFCT_HW_RTN_ERROR;
+		}
+		break;
+	case EFCT_HW_RESET_FIRMWARE:
+		efc_log_debug(hw->os, "issuing firmware reset\n");
+		if (sli_fw_reset(&hw->sli)) {
+			efc_log_err(hw->os, "sli_soft_reset failed\n");
+			rc = EFCT_HW_RTN_ERROR;
+		}
+		/*
+		 * Because the FW reset leaves the FW in a non-running state,
+		 * follow that with a regular reset.
+		 */
+		efc_log_debug(hw->os, "issuing function level reset\n");
+		if (sli_reset(&hw->sli)) {
+			efc_log_err(hw->os, "sli_reset failed\n");
+			rc = EFCT_HW_RTN_ERROR;
+		}
+		break;
+	default:
+		efc_log_err(hw->os,
+			     "unknown reset type - no reset performed\n");
+		hw->state = prev_state;
+		rc = EFCT_HW_RTN_INVALID_ARG;
+		break;
+	}
+
+	return rc;
+}
+
+enum efct_hw_rtn
+efct_hw_reset(struct efct_hw *hw, enum efct_hw_reset reset)
+{
+	enum efct_hw_rtn rc = EFCT_HW_RTN_SUCCESS;
+	u32	iters;
+	enum efct_hw_state prev_state = hw->state;
+
+	if (hw->state != EFCT_HW_STATE_ACTIVE)
+		efc_log_debug(hw->os,
+			      "HW state %d is not active\n", hw->state);
+
+	hw->state = EFCT_HW_STATE_RESET_IN_PROGRESS;
+
+	/*
+	 * If the prev_state is already reset/teardown in progress,
+	 * don't continue further
+	 */
+	if (prev_state == EFCT_HW_STATE_RESET_IN_PROGRESS ||
+	    prev_state == EFCT_HW_STATE_TEARDOWN_IN_PROGRESS)
+		return efct_hw_sli_reset(hw, reset, prev_state);
+
+	if (prev_state != EFCT_HW_STATE_UNINITIALIZED) {
+		efct_hw_flush(hw);
+
+		/*
+		 * If an mailbox command requiring a DMA is outstanding
+		 * (SFP/DDM), then the FW will UE when the reset is issued.
+		 * So attempt to complete all mailbox commands.
+		 */
+		iters = 10;
+		while (!list_empty(&hw->cmd_head) && iters) {
+			mdelay(10);
+			efct_hw_flush(hw);
+			iters--;
+		}
+
+		if (list_empty(&hw->cmd_head))
+			efc_log_debug(hw->os,
+				       "All commands completed on MQ queue\n");
+		else
+			efc_log_debug(hw->os,
+				       "Some commands still pending on MQ queue\n");
+	}
+
+	/* Reset the chip */
+	rc = efct_hw_sli_reset(hw, reset, prev_state);
+	if (rc == EFCT_HW_RTN_INVALID_ARG)
+		return EFCT_HW_RTN_ERROR;
+
+	return rc;
+}
+
+int
+efct_hw_get_num_eq(struct efct_hw *hw)
+{
+	return hw->eq_count;
+}
diff --git a/drivers/scsi/elx/efct/efct_hw.h b/drivers/scsi/elx/efct/efct_hw.h
index 0b6838c7f924..9c025a1709e3 100644
--- a/drivers/scsi/elx/efct/efct_hw.h
+++ b/drivers/scsi/elx/efct/efct_hw.h
@@ -772,4 +772,35 @@ efct_hw_get_host_stats(struct efct_hw *hw,
 			void *arg),
 		void *arg);
 
+struct hw_eq *efct_hw_new_eq(struct efct_hw *hw, u32 entry_count);
+struct hw_cq *efct_hw_new_cq(struct hw_eq *eq, u32 entry_count);
+extern u32
+efct_hw_new_cq_set(struct hw_eq *eqs[], struct hw_cq *cqs[],
+		   u32 num_cqs, u32 entry_count);
+struct hw_mq *efct_hw_new_mq(struct hw_cq *cq, u32 entry_count);
+extern struct hw_wq
+*efct_hw_new_wq(struct hw_cq *cq, u32 entry_count);
+extern struct hw_rq
+*efct_hw_new_rq(struct hw_cq *cq, u32 entry_count);
+extern u32
+efct_hw_new_rq_set(struct hw_cq *cqs[], struct hw_rq *rqs[],
+		   u32 num_rq_pairs, u32 entry_count);
+void efct_hw_del_eq(struct hw_eq *eq);
+void efct_hw_del_cq(struct hw_cq *cq);
+void efct_hw_del_mq(struct hw_mq *mq);
+void efct_hw_del_wq(struct hw_wq *wq);
+void efct_hw_del_rq(struct hw_rq *rq);
+void efct_hw_queue_dump(struct efct_hw *hw);
+void efct_hw_queue_teardown(struct efct_hw *hw);
+enum efct_hw_rtn efct_hw_teardown(struct efct_hw *hw);
+enum efct_hw_rtn
+efct_hw_reset(struct efct_hw *hw, enum efct_hw_reset reset);
+int efct_hw_get_num_eq(struct efct_hw *hw);
+
+extern enum efct_hw_rtn
+efct_hw_port_control(struct efct_hw *hw, enum efct_hw_port ctrl,
+		     uintptr_t value,
+		void (*cb)(int status, uintptr_t value, void *arg),
+		void *arg);
+
 #endif /* __EFCT_H__ */
diff --git a/drivers/scsi/elx/efct/efct_xport.c b/drivers/scsi/elx/efct/efct_xport.c
index b683208d396f..fef7f427dbbf 100644
--- a/drivers/scsi/elx/efct/efct_xport.c
+++ b/drivers/scsi/elx/efct/efct_xport.c
@@ -521,3 +521,294 @@ efct_scsi_release_fc_transport(void)
 
 	return EFC_SUCCESS;
 }
+
+int
+efct_xport_detach(struct efct_xport *xport)
+{
+	struct efct *efct = xport->efct;
+
+	/* free resources associated with target-server and initiator-client */
+	efct_scsi_tgt_del_device(efct);
+
+	efct_scsi_del_device(efct);
+
+	/*Shutdown FC Statistics timer*/
+	if (timer_pending(&xport->stats_timer))
+		del_timer(&xport->stats_timer);
+
+	efct_hw_teardown(&efct->hw);
+
+	efct_xport_delete_debugfs(efct);
+
+	return EFC_SUCCESS;
+}
+
+static void
+efct_xport_domain_free_cb(struct efc *efc, void *arg)
+{
+	struct completion *done = arg;
+
+	complete(done);
+}
+
+static int
+efct_xport_post_node_event_cb(struct efct_hw *hw, int status,
+			      u8 *mqe, void *arg)
+{
+	struct efct_xport_post_node_event *payload = arg;
+
+	if (payload) {
+		efc_node_post_shutdown(payload->node, payload->evt,
+				       payload->context);
+		complete(&payload->done);
+		if (atomic_sub_and_test(1, &payload->refcnt))
+			kfree(payload);
+	}
+	return EFC_SUCCESS;
+}
+
+static void
+efct_xport_force_free(struct efct_xport *xport)
+{
+	struct efct *efct = xport->efct;
+	struct efc *efc = efct->efcport;
+
+	efc_log_debug(efct, "reset required, do force shutdown\n");
+
+	if (!efc->domain) {
+		efc_log_err(efct, "Domain is already freed\n");
+		return;
+	}
+
+	efc_domain_force_free(efc->domain);
+}
+
+int
+efct_xport_control(struct efct_xport *xport, enum efct_xport_ctrl cmd, ...)
+{
+	u32 rc = 0;
+	struct efct *efct = NULL;
+	va_list argp;
+
+	efct = xport->efct;
+
+	switch (cmd) {
+	case EFCT_XPORT_PORT_ONLINE: {
+		/* Bring the port on-line */
+		rc = efct_hw_port_control(&efct->hw, EFCT_HW_PORT_INIT, 0,
+					  NULL, NULL);
+		if (rc)
+			efc_log_err(efct,
+				     "%s: Can't init port\n", efct->desc);
+		else
+			xport->configured_link_state = cmd;
+		break;
+	}
+	case EFCT_XPORT_PORT_OFFLINE: {
+		if (efct_hw_port_control(&efct->hw, EFCT_HW_PORT_SHUTDOWN, 0,
+					 NULL, NULL))
+			efc_log_err(efct, "port shutdown failed\n");
+		else
+			xport->configured_link_state = cmd;
+		break;
+	}
+
+	case EFCT_XPORT_SHUTDOWN: {
+		struct completion done;
+		bool reset_required;
+		unsigned long timeout;
+
+		/* if a PHYSDEV reset was performed (e.g. hw dump), will affect
+		 * all PCI functions; orderly shutdown won't work,
+		 * just force free
+		 */
+
+		reset_required = sli_reset_required(&efct->hw.sli);
+
+		if (reset_required) {
+			efc_log_debug(efct,
+				       "reset required, do force shutdown\n");
+			efct_xport_force_free(xport);
+			break;
+		}
+		init_completion(&done);
+
+		efc_register_domain_free_cb(efct->efcport,
+					efct_xport_domain_free_cb, &done);
+
+		if (efct_hw_port_control(&efct->hw, EFCT_HW_PORT_SHUTDOWN, 0,
+					 NULL, NULL)) {
+			efc_log_debug(efct,
+				       "port shutdown failed, do force shutdown\n");
+			efct_xport_force_free(xport);
+		} else {
+			efc_log_debug(efct,
+				       "Waiting %d seconds for domain shutdown.\n",
+			(EFCT_FC_DOMAIN_SHUTDOWN_TIMEOUT_USEC / 1000000));
+
+			timeout = usecs_to_jiffies(
+					EFCT_FC_DOMAIN_SHUTDOWN_TIMEOUT_USEC);
+			if (!wait_for_completion_timeout(&done, timeout)) {
+				efc_log_debug(efct,
+					       "Domain shutdown timed out!!\n");
+				efct_xport_force_free(xport);
+			}
+		}
+
+		efc_register_domain_free_cb(efct->efcport, NULL, NULL);
+
+		/* Free up any saved virtual ports */
+		efc_vport_del_all(efct->efcport);
+		break;
+	}
+
+	/*
+	 * POST_NODE_EVENT:  post an event to a node object
+	 *
+	 * This transport function is used to post an event to a node object.
+	 * It does this by submitting a NOP mailbox command to defer execution
+	 * to the interrupt context (thereby enforcing the serialized execution
+	 * of event posting to the node state machine instances)
+	 */
+	case EFCT_XPORT_POST_NODE_EVENT: {
+		struct efc_node *node;
+		u32	evt;
+		void *context;
+		struct efct_xport_post_node_event *payload = NULL;
+		struct efct *efct;
+		struct efct_hw *hw;
+
+		/* Retrieve arguments */
+		va_start(argp, cmd);
+		node = va_arg(argp, struct efc_node *);
+		evt = va_arg(argp, u32);
+		context = va_arg(argp, void *);
+		va_end(argp);
+
+		payload = kmalloc(sizeof(*payload), GFP_KERNEL);
+		if (!payload)
+			return EFC_FAIL;
+
+		memset(payload, 0, sizeof(*payload));
+
+		efct = node->efc->base;
+		hw = &efct->hw;
+
+		/* if node's state machine is disabled,
+		 * don't bother continuing
+		 */
+		if (!node->sm.current_state) {
+			efc_log_test(efct, "node %p state machine disabled\n",
+				      node);
+			kfree(payload);
+			rc = -1;
+			break;
+		}
+
+		/* Setup payload */
+		init_completion(&payload->done);
+
+		/* one for self and one for callback */
+		atomic_set(&payload->refcnt, 2);
+		payload->node = node;
+		payload->evt = evt;
+		payload->context = context;
+
+		if (efct_hw_async_call(hw, efct_xport_post_node_event_cb,
+				       payload)) {
+			efc_log_test(efct, "efct_hw_async_call failed\n");
+			kfree(payload);
+			rc = -1;
+			break;
+		}
+
+		/* Wait for completion */
+		if (wait_for_completion_interruptible(&payload->done)) {
+			efc_log_test(efct,
+				      "POST_NODE_EVENT: completion failed\n");
+			rc = -1;
+		}
+		if (atomic_sub_and_test(1, &payload->refcnt))
+			kfree(payload);
+
+		break;
+	}
+	/*
+	 * Set wwnn for the port. This will be used instead of the default
+	 * provided by FW.
+	 */
+	case EFCT_XPORT_WWNN_SET: {
+		u64 wwnn;
+
+		/* Retrieve arguments */
+		va_start(argp, cmd);
+		wwnn = va_arg(argp, uint64_t);
+		va_end(argp);
+
+		efc_log_debug(efct, " WWNN %016llx\n", wwnn);
+		xport->req_wwnn = wwnn;
+
+		break;
+	}
+	/*
+	 * Set wwpn for the port. This will be used instead of the default
+	 * provided by FW.
+	 */
+	case EFCT_XPORT_WWPN_SET: {
+		u64 wwpn;
+
+		/* Retrieve arguments */
+		va_start(argp, cmd);
+		wwpn = va_arg(argp, uint64_t);
+		va_end(argp);
+
+		efc_log_debug(efct, " WWPN %016llx\n", wwpn);
+		xport->req_wwpn = wwpn;
+
+		break;
+	}
+
+	default:
+		break;
+	}
+	return rc;
+}
+
+void
+efct_xport_free(struct efct_xport *xport)
+{
+	if (xport) {
+		efct_io_pool_free(xport->io_pool);
+
+		kfree(xport);
+	}
+}
+
+void
+efct_release_fc_transport(struct scsi_transport_template *transport_template)
+{
+	if (transport_template)
+		pr_err("releasing transport layer\n");
+
+	/* Releasing FC transport */
+	fc_release_transport(transport_template);
+}
+
+static void
+efct_xport_remove_host(struct Scsi_Host *shost)
+{
+	fc_remove_host(shost);
+}
+
+int efct_scsi_del_device(struct efct *efct)
+{
+	if (efct->shost) {
+		efc_log_debug(efct, "Unregistering with Transport Layer\n");
+		efct_xport_remove_host(efct->shost);
+		efc_log_debug(efct, "Unregistering with SCSI Midlayer\n");
+		scsi_remove_host(efct->shost);
+		scsi_host_put(efct->shost);
+		efct->shost = NULL;
+	}
+	return EFC_SUCCESS;
+}
-- 
2.16.4


  parent reply	other threads:[~2020-04-12  3:34 UTC|newest]

Thread overview: 124+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-12  3:32 [PATCH v3 00/31] [NEW] efct: Broadcom (Emulex) FC Target driver James Smart
2020-04-12  3:32 ` [PATCH v3 01/31] elx: libefc_sli: SLI-4 register offsets and field definitions James Smart
2020-04-14 15:23   ` Daniel Wagner
2020-04-22  4:28     ` James Smart
2020-04-15 12:06   ` Hannes Reinecke
2020-04-23  1:52   ` Roman Bolshakov
2020-04-12  3:32 ` [PATCH v3 02/31] elx: libefc_sli: SLI Descriptors and Queue entries James Smart
2020-04-14 18:02   ` Daniel Wagner
2020-04-22  4:41     ` James Smart
2020-04-15 12:14   ` Hannes Reinecke
2020-04-15 17:43     ` James Bottomley
2020-04-22  4:44     ` James Smart
2020-04-12  3:32 ` [PATCH v3 03/31] elx: libefc_sli: Data structures and defines for mbox commands James Smart
2020-04-14 19:01   ` Daniel Wagner
2020-04-15 12:22   ` Hannes Reinecke
2020-04-12  3:32 ` [PATCH v3 04/31] elx: libefc_sli: queue create/destroy/parse routines James Smart
2020-04-15 10:04   ` Daniel Wagner
2020-04-22  5:05     ` James Smart
2020-04-24  7:29       ` Daniel Wagner
2020-04-24 15:21         ` James Smart
2020-04-15 12:27   ` Hannes Reinecke
2020-04-12  3:32 ` [PATCH v3 05/31] elx: libefc_sli: Populate and post different WQEs James Smart
2020-04-15 14:34   ` Daniel Wagner
2020-04-22  5:08     ` James Smart
2020-04-12  3:32 ` [PATCH v3 06/31] elx: libefc_sli: bmbx routines and SLI config commands James Smart
2020-04-15 16:10   ` Daniel Wagner
2020-04-22  5:12     ` James Smart
2020-04-12  3:32 ` [PATCH v3 07/31] elx: libefc_sli: APIs to setup SLI library James Smart
2020-04-15 12:49   ` Hannes Reinecke
2020-04-15 17:06   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 08/31] elx: libefc: Generic state machine framework James Smart
2020-04-15 12:37   ` Hannes Reinecke
2020-04-15 17:20   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 09/31] elx: libefc: Emulex FC discovery library APIs and definitions James Smart
2020-04-15 12:41   ` Hannes Reinecke
2020-04-15 17:32   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 10/31] elx: libefc: FC Domain state machine interfaces James Smart
2020-04-15 12:50   ` Hannes Reinecke
2020-04-15 17:50   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 11/31] elx: libefc: SLI and FC PORT " James Smart
2020-04-15 15:38   ` Hannes Reinecke
2020-04-22 23:12     ` James Smart
2020-04-15 18:04   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 12/31] elx: libefc: Remote node " James Smart
2020-04-15 15:51   ` Hannes Reinecke
2020-04-23  1:35     ` James Smart
2020-04-23  8:02       ` Daniel Wagner
2020-04-23 18:24         ` James Smart
2020-04-15 18:19   ` Daniel Wagner
2020-04-23  1:32     ` James Smart
2020-04-23  7:49       ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 13/31] elx: libefc: Fabric " James Smart
2020-04-15 18:51   ` Daniel Wagner
2020-04-16  6:37   ` Hannes Reinecke
2020-04-23  1:38     ` James Smart
2020-04-12  3:32 ` [PATCH v3 14/31] elx: libefc: FC node ELS and state handling James Smart
2020-04-15 18:56   ` Daniel Wagner
2020-04-23  2:50     ` James Smart
2020-04-23  8:05       ` Daniel Wagner
2020-04-23  8:12         ` Nathan Chancellor
2020-04-16  6:47   ` Hannes Reinecke
2020-04-23  2:55     ` James Smart
2020-04-12  3:32 ` [PATCH v3 15/31] elx: efct: Data structures and defines for hw operations James Smart
2020-04-16  6:51   ` Hannes Reinecke
2020-04-23  2:57     ` James Smart
2020-04-16  7:22   ` Daniel Wagner
2020-04-23  2:59     ` James Smart
2020-04-12  3:32 ` [PATCH v3 16/31] elx: efct: Driver initialization routines James Smart
2020-04-16  7:11   ` Hannes Reinecke
2020-04-23  3:09     ` James Smart
2020-04-16  8:03   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 17/31] elx: efct: Hardware queues creation and deletion James Smart
2020-04-16  7:14   ` Hannes Reinecke
2020-04-16  8:24   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 18/31] elx: efct: RQ buffer, memory pool allocation and deallocation APIs James Smart
2020-04-16  7:24   ` Hannes Reinecke
2020-04-23  3:16     ` James Smart
2020-04-16  8:41   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 19/31] elx: efct: Hardware IO and SGL initialization James Smart
2020-04-16  7:32   ` Hannes Reinecke
2020-04-16  8:47   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 20/31] elx: efct: Hardware queues processing James Smart
2020-04-16  7:37   ` Hannes Reinecke
2020-04-16  9:17   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 21/31] elx: efct: Unsolicited FC frame processing routines James Smart
2020-04-16  9:36   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 22/31] elx: efct: Extended link Service IO handling James Smart
2020-04-16  7:58   ` Hannes Reinecke
2020-04-23  3:30     ` James Smart
2020-04-16  9:49   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 23/31] elx: efct: SCSI IO handling routines James Smart
2020-04-16 11:40   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 24/31] elx: efct: LIO backend interface routines James Smart
2020-04-12  4:57   ` Bart Van Assche
2020-04-16 11:48     ` Daniel Wagner
2020-04-22  4:20     ` James Smart
2020-04-22  5:09       ` Bart Van Assche
2020-04-23  1:39         ` James Smart
2020-04-16  8:02   ` Hannes Reinecke
2020-04-16 12:34   ` Daniel Wagner
2020-04-22  4:20     ` James Smart
2020-04-12  3:32 ` [PATCH v3 25/31] elx: efct: Hardware IO submission routines James Smart
2020-04-16  8:10   ` Hannes Reinecke
2020-04-16 12:45     ` Daniel Wagner
2020-04-23  3:37       ` James Smart
2020-04-16 12:44   ` Daniel Wagner
2020-04-12  3:32 ` [PATCH v3 26/31] elx: efct: link statistics and SFP data James Smart
2020-04-16 12:55   ` Daniel Wagner
2020-04-12  3:32 ` James Smart [this message]
2020-04-16  9:45   ` [PATCH v3 27/31] elx: efct: xport and hardware teardown routines Hannes Reinecke
2020-04-16 13:01   ` Daniel Wagner
2020-04-12  3:33 ` [PATCH v3 28/31] elx: efct: Firmware update, async link processing James Smart
2020-04-16 10:01   ` Hannes Reinecke
2020-04-16 13:10   ` Daniel Wagner
2020-04-12  3:33 ` [PATCH v3 29/31] elx: efct: scsi_transport_fc host interface support James Smart
2020-04-12  3:33 ` [PATCH v3 30/31] elx: efct: Add Makefile and Kconfig for efct driver James Smart
2020-04-16 10:02   ` Hannes Reinecke
2020-04-16 13:15   ` Daniel Wagner
2020-04-12  3:33 ` [PATCH v3 31/31] elx: efct: Tie into kernel Kconfig and build process James Smart
2020-04-12  6:16   ` kbuild test robot
2020-04-12  6:16     ` kbuild test robot
2020-04-12  7:56   ` kbuild test robot
2020-04-12  7:56     ` kbuild test robot
2020-04-16 13:15   ` Daniel Wagner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200412033303.29574-28-jsmart2021@gmail.com \
    --to=jsmart2021@gmail.com \
    --cc=bvanassche@acm.org \
    --cc=dwagner@suse.de \
    --cc=hare@suse.de \
    --cc=herbszt@gmx.de \
    --cc=linux-scsi@vger.kernel.org \
    --cc=maier@linux.ibm.com \
    --cc=natechancellor@gmail.com \
    --cc=ram.vegesna@broadcom.com \
    --cc=rdunlap@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.