From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>,
linux-rdma@vger.kernel.org, netdev@vger.kernel.org,
Saeed Mahameed <saeedm@mellanox.com>
Subject: [PATCH mlx5-next 06/13] net/mlx5: Open-code modify QP in the IPoIB module
Date: Mon, 13 Apr 2020 17:23:01 +0300 [thread overview]
Message-ID: <20200413142308.936946-7-leon@kernel.org> (raw)
In-Reply-To: <20200413142308.936946-1-leon@kernel.org>
From: Leon Romanovsky <leonro@mellanox.com>
Remove dependency on qp.c from the IPoIB by open coding
modify QP interface.
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
.../ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 76 ++++++++++---------
1 file changed, 42 insertions(+), 34 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
index 8bca11cb1e19..83b198d8e3d6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
@@ -161,44 +161,54 @@ int mlx5i_init_underlay_qp(struct mlx5e_priv *priv)
struct mlx5_core_dev *mdev = priv->mdev;
struct mlx5i_priv *ipriv = priv->ppriv;
struct mlx5_core_qp *qp = &ipriv->qp;
- struct mlx5_qp_context *context;
int ret;
- /* QP states */
- context = kzalloc(sizeof(*context), GFP_KERNEL);
- if (!context)
- return -ENOMEM;
+ {
+ u32 in[MLX5_ST_SZ_DW(rst2init_qp_in)] = {};
+ u32 *qpc;
- context->flags = cpu_to_be32(MLX5_QP_PM_MIGRATED << 11);
- context->pri_path.port = 1;
- context->pri_path.pkey_index = cpu_to_be16(ipriv->pkey_index);
- context->qkey = cpu_to_be32(IB_DEFAULT_Q_KEY);
+ qpc = MLX5_ADDR_OF(rst2init_qp_in, in, qpc);
- ret = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RST2INIT_QP, 0, context, qp);
- if (ret) {
- mlx5_core_err(mdev, "Failed to modify qp RST2INIT, err: %d\n", ret);
- goto err_qp_modify_to_err;
- }
- memset(context, 0, sizeof(*context));
+ MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
+ MLX5_SET(qpc, qpc, primary_address_path.pkey_index,
+ ipriv->pkey_index);
+ MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
+ MLX5_SET(qpc, qpc, q_key, IB_DEFAULT_Q_KEY);
- ret = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_INIT2RTR_QP, 0, context, qp);
- if (ret) {
- mlx5_core_err(mdev, "Failed to modify qp INIT2RTR, err: %d\n", ret);
- goto err_qp_modify_to_err;
+ MLX5_SET(rst2init_qp_in, in, opcode, MLX5_CMD_OP_RST2INIT_QP);
+ MLX5_SET(rst2init_qp_in, in, qpn, qp->qpn);
+ ret = mlx5_cmd_exec_in(mdev, rst2init_qp, in);
+ if (ret)
+ goto err_qp_modify_to_err;
}
-
- ret = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RTR2RTS_QP, 0, context, qp);
- if (ret) {
- mlx5_core_err(mdev, "Failed to modify qp RTR2RTS, err: %d\n", ret);
- goto err_qp_modify_to_err;
+ {
+ u32 in[MLX5_ST_SZ_DW(init2rtr_qp_in)] = {};
+
+ MLX5_SET(init2rtr_qp_in, in, opcode, MLX5_CMD_OP_INIT2RTR_QP);
+ MLX5_SET(init2rtr_qp_in, in, qpn, qp->qpn);
+ ret = mlx5_cmd_exec_in(mdev, init2rtr_qp, in);
+ if (ret)
+ goto err_qp_modify_to_err;
+ }
+ {
+ u32 in[MLX5_ST_SZ_DW(rtr2rts_qp_in)] = {};
+
+ MLX5_SET(rtr2rts_qp_in, in, opcode, MLX5_CMD_OP_RTR2RTS_QP);
+ MLX5_SET(rtr2rts_qp_in, in, qpn, qp->qpn);
+ ret = mlx5_cmd_exec_in(mdev, rtr2rts_qp, in);
+ if (ret)
+ goto err_qp_modify_to_err;
}
-
- kfree(context);
return 0;
err_qp_modify_to_err:
- mlx5_core_qp_modify(mdev, MLX5_CMD_OP_2ERR_QP, 0, &context, qp);
- kfree(context);
+ {
+ u32 in[MLX5_ST_SZ_DW(qp_2err_in)] = {};
+
+ MLX5_SET(qp_2err_in, in, opcode, MLX5_CMD_OP_2ERR_QP);
+ MLX5_SET(qp_2err_in, in, qpn, qp->qpn);
+ mlx5_cmd_exec_in(mdev, qp_2err, in);
+ }
return ret;
}
@@ -206,13 +216,11 @@ void mlx5i_uninit_underlay_qp(struct mlx5e_priv *priv)
{
struct mlx5i_priv *ipriv = priv->ppriv;
struct mlx5_core_dev *mdev = priv->mdev;
- struct mlx5_qp_context context;
- int err;
+ u32 in[MLX5_ST_SZ_DW(qp_2rst_in)] = {};
- err = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_2RST_QP, 0, &context,
- &ipriv->qp);
- if (err)
- mlx5_core_err(mdev, "Failed to modify qp 2RST, err: %d\n", err);
+ MLX5_SET(qp_2rst_in, in, opcode, MLX5_CMD_OP_2RST_QP);
+ MLX5_SET(qp_2rst_in, in, qpn, ipriv->qp.qpn);
+ mlx5_cmd_exec_in(mdev, qp_2rst, in);
}
#define MLX5_QP_ENHANCED_ULP_STATELESS_MODE 2
--
2.25.2
next prev parent reply other threads:[~2020-04-13 14:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-13 14:22 [PATCH mlx5-next 00/13] Move QP code to be under mlx5_ib responsibility Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 01/13] net/mlx5: Provide simplified command interfaces Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 02/13] net/mlx5: Open-code create and destroy QP calls Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 03/13] net/mlx5: Remove empty QP and CQ events handlers Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 04/13] net/mlx5: Open-code modify QP in steering module Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 05/13] net/mlx5: Open-code modify QP in the FPGA module Leon Romanovsky
2020-04-13 14:23 ` Leon Romanovsky [this message]
2020-04-13 14:23 ` [PATCH mlx5-next 07/13] net/mlx5: Remove extra indirection while storing QPN Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 08/13] net/mlx5: Replace hand written QP context struct with automatic getters Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 09/13] net/mlx5: Remove Q counter low level helper APIs Leon Romanovsky
2020-04-13 14:23 ` [PATCH rdma-next 10/13] RDMA/mlx5: Delete Q counter allocations command Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 11/13] net/mlx5: Delete not-used cmd header Leon Romanovsky
2020-04-13 14:23 ` [PATCH rdma-next 12/13] RDMA/mlx5: Alphabetically sort build artifacts Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 13/13] net/mlx5: Move QP logic to mlx5_ib Leon Romanovsky
2020-04-19 12:56 ` [PATCH mlx5-next 00/13] Move QP code to be under mlx5_ib responsibility Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200413142308.936946-7-leon@kernel.org \
--to=leon@kernel.org \
--cc=dledford@redhat.com \
--cc=jgg@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.