[PATCH v3 1/7] linux-headers: update

[Eric Farman <farman@linux.ibm.com>]

From: Farhan Ali <alifm@linux.ibm.com>

Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
---

Notes:
    v2->v3: [EF]
     - Re-ran 16 April 2020 (based on kernel tag v5.6, and limited to
       bits interesting to this series)
    
    v1->v2: [EF]
     - Re-ran 3 February 2020 (based on kernel tag v5.5)
    
    v0->v1: [EF]
     - Run scripts/update-linux-headers.sh properly, but do not
       add resulting changes to linux-headers/asm-mips/

 linux-headers/linux/vfio.h     | 40 ++++++++++++++++++++++++++++++++++
 linux-headers/linux/vfio_ccw.h | 18 +++++++++++++++
 2 files changed, 58 insertions(+)

diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
index fb10370d29..9c8d889551 100644
--- a/linux-headers/linux/vfio.h
+++ b/linux-headers/linux/vfio.h
@@ -378,6 +378,8 @@ struct vfio_region_gfx_edid {
 
 /* sub-types for VFIO_REGION_TYPE_CCW */
 #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD	(1)
+#define VFIO_REGION_SUBTYPE_CCW_SCHIB		(2)
+#define VFIO_REGION_SUBTYPE_CCW_CRW		(3)
 
 /*
  * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
@@ -577,6 +579,7 @@ enum {
 
 enum {
 	VFIO_CCW_IO_IRQ_INDEX,
+	VFIO_CCW_CRW_IRQ_INDEX,
 	VFIO_CCW_NUM_IRQS
 };
 
@@ -707,6 +710,43 @@ struct vfio_device_ioeventfd {
 
 #define VFIO_DEVICE_IOEVENTFD		_IO(VFIO_TYPE, VFIO_BASE + 16)
 
+/**
+ * VFIO_DEVICE_FEATURE - _IORW(VFIO_TYPE, VFIO_BASE + 17,
+ *			       struct vfio_device_feature)
+ *
+ * Get, set, or probe feature data of the device.  The feature is selected
+ * using the FEATURE_MASK portion of the flags field.  Support for a feature
+ * can be probed by setting both the FEATURE_MASK and PROBE bits.  A probe
+ * may optionally include the GET and/or SET bits to determine read vs write
+ * access of the feature respectively.  Probing a feature will return success
+ * if the feature is supported and all of the optionally indicated GET/SET
+ * methods are supported.  The format of the data portion of the structure is
+ * specific to the given feature.  The data portion is not required for
+ * probing.  GET and SET are mutually exclusive, except for use with PROBE.
+ *
+ * Return 0 on success, -errno on failure.
+ */
+struct vfio_device_feature {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_DEVICE_FEATURE_MASK	(0xffff) /* 16-bit feature index */
+#define VFIO_DEVICE_FEATURE_GET		(1 << 16) /* Get feature into data[] */
+#define VFIO_DEVICE_FEATURE_SET		(1 << 17) /* Set feature from data[] */
+#define VFIO_DEVICE_FEATURE_PROBE	(1 << 18) /* Probe feature support */
+	__u8	data[];
+};
+
+#define VFIO_DEVICE_FEATURE		_IO(VFIO_TYPE, VFIO_BASE + 17)
+
+/*
+ * Provide support for setting a PCI VF Token, which is used as a shared
+ * secret between PF and VF drivers.  This feature may only be set on a
+ * PCI SR-IOV PF when SR-IOV is enabled on the PF and there are no existing
+ * open VFs.  Data provided when setting this feature is a 16-byte array
+ * (__u8 b[16]), representing a UUID.
+ */
+#define VFIO_DEVICE_FEATURE_PCI_VF_TOKEN	(0)
+
 /* -------- API for Type1 VFIO IOMMU -------- */
 
 /**
diff --git a/linux-headers/linux/vfio_ccw.h b/linux-headers/linux/vfio_ccw.h
index fcc3e69ef5..237fd5a618 100644
--- a/linux-headers/linux/vfio_ccw.h
+++ b/linux-headers/linux/vfio_ccw.h
@@ -34,4 +34,22 @@ struct ccw_cmd_region {
 	__u32 ret_code;
 } __attribute__((packed));
 
+/*
+ * Used for processing commands that read the subchannel-information block
+ * Reading this region triggers a stsch() to hardware
+ * Note: this is controlled by a capability
+ */
+struct ccw_schib_region {
+#define SCHIB_AREA_SIZE 52
+	__u8 schib_area[SCHIB_AREA_SIZE];
+} __attribute__((packed));
+
+/*
+ * Used for returning Channel Report Word(s) to userspace.
+ * Note: this is controlled by a capability
+ */
+struct ccw_crw_region {
+	__u32 crw;
+} __attribute__((packed));
+
 #endif
-- 
2.17.1