[PATCH 1/4] sam460ex: Revert change to SPD memory type for <= 128 MiB

[Markus Armbruster <armbru@redhat.com>]

Requesting 32 or 64 MiB of RAM with the sam460ex machine type produces
a useless warning:

    qemu-system-ppc: warning: Memory size is too small for SDRAM type, adjusting type

This is because sam460ex_init() asks spd_data_generate() for DDR2,
which is impossible, so spd_data_generate() corrects it to DDR.

The warning goes back to commit 08fd99179a "sam460ex: Clean up SPD
EEPROM creation".  Turns out that commit changed memory type and
number of banks to

    RAM size    #banks  type    bank size
     128 MiB         1   DDR2     128 MiB
      64 MiB         2   DDR       32 MiB
      32 MiB         1   DDR       32 MiB

from

    RAM size    #banks  type    bank size
     128 MiB         2   SDR       64 MiB
      64 MiB         2   SDR       32 MiB
      32 MiB         2   SDR       16 MiB

Reverting that change also gets rid of the warning.

I doubt physical Sam460ex boards can take SDR or DDR modules, though.

The commit changed SPD contents in other places, too.  So does commit
fb1b0fcc03 "target/mips: fulong2e: Dynamically generate SPD EEPROM
data" for machine type fulong2e.  I'm not reverting these changes.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 hw/ppc/sam460ex.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
index 898453cf30..856bc0b5a3 100644
--- a/hw/ppc/sam460ex.c
+++ b/hw/ppc/sam460ex.c
@@ -335,7 +335,8 @@ static void sam460ex_init(MachineState *machine)
     dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700, uic[0][2]);
     i2c = PPC4xx_I2C(dev)->bus;
     /* SPD EEPROM on RAM module */
-    spd_data = spd_data_generate(DDR2, ram_sizes[0], &err);
+    spd_data = spd_data_generate(ram_sizes[0] < 256 * MiB ? SDR : DDR2,
+                                 ram_sizes[0], &err);
     if (err) {
         warn_report_err(err);
     }
-- 
2.21.1