From: Paul Zimmerman <pauldzim@gmail.com>
To: Gerd Hoffmann <kraxel@redhat.com>
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Stefan Hajnoczi" <stefanha@gmail.com>,
"QEMU Developers" <qemu-devel@nongnu.org>,
"Paul Zimmerman" <pauldzim@gmail.com>,
"John Snow" <jsnow@redhat.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>
Subject: [PATCH v3 6/7] wire in the dwc-hsotg (dwc2) USB host controller emulation
Date: Mon, 20 Apr 2020 18:45:50 -0700 [thread overview]
Message-ID: <20200421014551.10426-7-pauldzim@gmail.com> (raw)
In-Reply-To: <20200421014551.10426-1-pauldzim@gmail.com>
Wire the dwc-hsotg (dwc2) emulation into Qemu
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
---
hw/arm/bcm2835_peripherals.c | 21 ++++++++++++++++++++-
hw/usb/Kconfig | 5 +++++
hw/usb/Makefile.objs | 1 +
include/hw/arm/bcm2835_peripherals.h | 3 ++-
4 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 5e2c832d95..3b554cfac0 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -128,6 +128,13 @@ static void bcm2835_peripherals_init(Object *obj)
sysbus_init_child_obj(obj, "mphi", &s->mphi, sizeof(s->mphi),
TYPE_BCM2835_MPHI);
+ /* DWC2 */
+ sysbus_init_child_obj(obj, "dwc2", &s->dwc2, sizeof(s->dwc2),
+ TYPE_DWC2_USB);
+
+ object_property_add_const_link(OBJECT(&s->dwc2), "dma-mr",
+ OBJECT(&s->gpu_bus_mr), &error_abort);
+
object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhci",
OBJECT(&s->sdhci.sdbus), &error_abort);
object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost",
@@ -385,6 +392,19 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
INTERRUPT_HOSTPORT));
+ /* DWC2 */
+ object_property_set_bool(OBJECT(&s->dwc2), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ memory_region_add_subregion(&s->peri_mr, USB_OTG_OFFSET,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dwc2), 0));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->dwc2), 0,
+ qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+ INTERRUPT_USB));
+
create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40);
create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000);
create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000);
@@ -398,7 +418,6 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
create_unimp(s, &s->otp, "bcm2835-otp", OTP_OFFSET, 0x80);
create_unimp(s, &s->dbus, "bcm2835-dbus", DBUS_OFFSET, 0x8000);
create_unimp(s, &s->ave0, "bcm2835-ave0", AVE0_OFFSET, 0x8000);
- create_unimp(s, &s->dwc2, "dwc-usb2", USB_OTG_OFFSET, 0x1000);
create_unimp(s, &s->sdramc, "bcm2835-sdramc", SDRAMC_OFFSET, 0x100);
}
diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
index 464348ba14..d4d8c37c28 100644
--- a/hw/usb/Kconfig
+++ b/hw/usb/Kconfig
@@ -46,6 +46,11 @@ config USB_MUSB
bool
select USB
+config USB_DWC2
+ bool
+ default y
+ select USB
+
config TUSB6010
bool
select USB_MUSB
diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
index 66835e5bf7..fa5c3fa1b8 100644
--- a/hw/usb/Makefile.objs
+++ b/hw/usb/Makefile.objs
@@ -12,6 +12,7 @@ common-obj-$(CONFIG_USB_EHCI_SYSBUS) += hcd-ehci-sysbus.o
common-obj-$(CONFIG_USB_XHCI) += hcd-xhci.o
common-obj-$(CONFIG_USB_XHCI_NEC) += hcd-xhci-nec.o
common-obj-$(CONFIG_USB_MUSB) += hcd-musb.o
+common-obj-$(CONFIG_USB_DWC2) += hcd-dwc2.o
common-obj-$(CONFIG_TUSB6010) += tusb6010.o
common-obj-$(CONFIG_IMX) += chipidea.o
diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h
index 7a7a8f6141..48a0ad1633 100644
--- a/include/hw/arm/bcm2835_peripherals.h
+++ b/include/hw/arm/bcm2835_peripherals.h
@@ -27,6 +27,7 @@
#include "hw/sd/bcm2835_sdhost.h"
#include "hw/gpio/bcm2835_gpio.h"
#include "hw/timer/bcm2835_systmr.h"
+#include "hw/usb/hcd-dwc2.h"
#include "hw/misc/unimp.h"
#define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals"
@@ -67,7 +68,7 @@ typedef struct BCM2835PeripheralState {
UnimplementedDeviceState ave0;
UnimplementedDeviceState bscsl;
UnimplementedDeviceState smi;
- UnimplementedDeviceState dwc2;
+ DWC2State dwc2;
UnimplementedDeviceState sdramc;
} BCM2835PeripheralState;
--
2.17.1
next prev parent reply other threads:[~2020-04-21 1:51 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-21 1:45 [PATCH v3 0/7] dwc-hsotg (aka dwc2) USB host controller emulation Paul Zimmerman
2020-04-21 1:45 ` [PATCH v3 1/7] raspi: add BCM2835 SOC MPHI emulation Paul Zimmerman
2020-04-21 1:45 ` [PATCH v3 2/7] dwc-hsotg (dwc2) USB host controller register definitions Paul Zimmerman
2020-04-21 1:45 ` [PATCH v3 3/7] dwc-hsotg (dwc2) USB host controller state definitions Paul Zimmerman
2020-04-21 1:45 ` [PATCH v3 4/7] dwc-hsotg (dwc2) USB host controller emulation Paul Zimmerman
2020-04-21 1:45 ` [PATCH v3 5/7] usb: add short-packet handling to usb-storage driver Paul Zimmerman
2020-04-21 1:45 ` Paul Zimmerman [this message]
2020-04-21 6:25 ` [PATCH v3 6/7] wire in the dwc-hsotg (dwc2) USB host controller emulation Philippe Mathieu-Daudé
2020-04-21 1:45 ` [PATCH v3 7/7] raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host Paul Zimmerman
2020-04-21 3:15 ` [PATCH v3 0/7] dwc-hsotg (aka dwc2) USB host controller emulation no-reply
2020-04-21 4:04 ` Paul Zimmerman
2020-04-21 3:19 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200421014551.10426-7-pauldzim@gmail.com \
--to=pauldzim@gmail.com \
--cc=f4bug@amsat.org \
--cc=jsnow@redhat.com \
--cc=kraxel@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.