From: Marek Behun <marek.behun@nic.cz>
To: u-boot@lists.denx.de
Subject: latest u-boot branch for Marvell Armada 88F3720
Date: Tue, 21 Apr 2020 13:11:44 +0200 [thread overview]
Message-ID: <20200421131144.2e29afba@nic.cz> (raw)
In-Reply-To: <VI1PR05MB4992764803E521F6C6066EA8A6D50@VI1PR05MB4992.eurprd05.prod.outlook.com>
Moritz,
is it possible for you to give me ssh access to a computer connected to
the espressobin? Are you open to that? I could give you information
about how to do it.
Marek
On Tue, 21 Apr 2020 10:25:22 +0000
Moritz Berghof <mberghof@phoenixcontact.com> wrote:
> Hi Marek,
>
> sorry i'm not that fast. Different things around.
>
> I tested the u-boot master with your patches. But it crashed on my espressobin, unfortunately.
>
> Log:
>
> DLL 0xc0001050[29:24]: [5,32,1b]
> DLL 0xc0001054[21:16]: [4,2b,17]
> DLL 0xc0001054[29:24]: [a,35,1f]
> DLL 0xc0001074[21:16]: [0,3f,1f]
> DLL 0xc0001074NOTICE: Booting Trusted Firmware
> NOTICE: BL1: v1.3(release):armada-17.10.8:34247e02
> NOTICE: BL1: Built : 10:52:47, Mar 31 2NOTICE: BL2: v1.3(release):armada-17.10.8:34247e02
> NOTICE: BL2: Built : 10:52:48, Mar 31 2020
> NNOTICE: BL31: v1.3(release):armada-17.10.8:34247e02
> NOTICE: BL31:
>
> U-Boot 2020.04-00490-ge4837da782 (Apr 21 2020 - 12:06:24 +0200)
>
> DRAM: 1 GiB
> Comphy-0: UNCONNECTED 2.5 Gbps
> Comphy-1: UNCONNECTED 5 Gbps
> Comphy-2: SATA0 5 Gbps
> SATA link 0 timeout.
> AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
> flags: ncq led only pmp fbss pio slum part sxs
> "Synchronous Abort" handler, esr 0x96000210
> elr: 0000000000028afc lr : 0000000000028acc (reloc)
> elr: 000000003ff6aafc lr : 000000003ff6aacc
> x0 : 00000000d0074000 x1 : 0000000000000000
> x2 : 0000000000000008 x3 : 0000000000000000
> x4 : 0000000000000018 x5 : 0000000000000000
> x6 : 000000003fb2f440 x7 : 00000000ffffffe0
> x8 : 000000003fb2f640 x9 : 0000000000000008
> x10: 0000000000000abc x11: 000000003fb2f23c
> x12: 0000000000000a2b x13: 0000000000000a20
> x14: 0000000000000000 x15: 000000003fb2f640
> x16: 000000003ffc7f41 x17: 000000003ffc7f41
> x18: 000000003fb31de0 x19: 000000003fb33aa0
> x20: 000000003fb33880 x21: 000000003ffd2800
> x22: 0000000000000000 x23: 0000000000000000
> x24: 0000000000000000 x25: 0000000000000000
> x26: 0000000000000000 x27: 0000000000000000
> x28: 0000000000000000 x29: 000000003fb2f540
>
> Code: 91406000 b9000001 f9400260 91401000 (b9480001)
> Resetting CPU ...
>
> resetting ...
>
>
>
>
>
> Even when I disable the sata device at the espressobin .dts, the actuall master crashs.
>
> Log:
>
> DLL 0xc0001050[29:24]: [5,32,1b]
> DLL 0xc0001054[21:16]: [4,2b,17]
> DLL 0xc0001054[29:24]: [a,35,1f]
> DLL 0xc0001074[21:16]: [0,3f,1f]
> DLL 0xc0001074NOTICE: Booting Trusted Firmware
> NOTICE: BL1: v1.3(release):armada-17.10.8:34247e02
> NOTICE: BL1: Built : 10:52:47, Mar 31 2NOTICE: BL2: v1.3(release):armada-17.10.8:34247e02
> NOTICE: BL2: Built : 10:52:48, Mar 31 2020
> NNOTICE: BL31: v1.3(release):armada-17.10.8:34247e02
> NOTICE: BL31:
>
> U-Boot 2020.04-00490-ge4837da782 (Apr 21 2020 - 12:06:24 +0200)
>
> DRAM: 1 GiB
> Comphy-0: UNCONNECTED 2.5 Gbps
> Comphy-1: UNCONNECTED 5 Gbps
> Comphy-2: SATA0 5 Gbps
> "Synchronous Abort" handler, esr 0x96000210
> elr: 0000000000028afc lr : 0000000000028acc (reloc)
> elr: 000000003ff6aafc lr : 000000003ff6aacc
> x0 : 00000000d0074000 x1 : 0000000000000000
> x2 : 0000000000000008 x3 : 0000000000000000
> x4 : 0000000000000018 x5 : 0000000000000000
> x6 : 000000003fb2f440 x7 : 00000000ffffffe0
> x8 : 000000003fb2f640 x9 : 0000000000000008
> x10: 0000000000000abc x11: 000000003fb2f23c
> x12: 0000000000000a2b x13: 0000000000000a20
> x14: 0000000000000000 x15: 000000003fb2f640
> x16: 000000003ffc7f41 x17: 000000003ffc7f41
> x18: 000000003fb31de0 x19: 000000003fb33aa0
> x20: 000000003fb33880 x21: 000000003ffd2800
> x22: 0000000000000000 x23: 0000000000000000
> x24: 0000000000000000 x25: 0000000000000000
> x26: 0000000000000000 x27: 0000000000000000
> x28: 0000000000000000 x29: 000000003fb2f540
>
> Code: 91406000 b9000001 f9400260 91401000 (b9480001)
> Resetting CPU ...
>
> resetting ...
>
>
>
> To disable Sata device at .dts worked well with the commit a5730fed6bca80376c95d209166f87ba42e887a0 to boot the u-boot master. I mentioned that some weeks ago.
>
> Sorry for the bad news.
>
>
> Btw, do you or someone else have an idea why eth, switch and mmc is not working on espressobin? I found out that some mii, net configs at the _defconfig file helped to activate the eth, phy, mio and switch, but it works not properly. For example on error: U-Boot: Non unique device name eth. Ideas?
>
> I'm digging further,
>
> --
> Moritz Berghof
> Software Engineer
> Tel.?+49?30?921028-209
> Fax?+49?30?921028-020
> mberghof at phoenixcontact.com
> www.phoenixcontact.com
> ?
> PHOENIX?CONTACT?Cyber?Security?GmbH
> Richard-Willst?tter-Stra?e?6
> D-12489?Berlin
> Register?Court:?AG?Charlottenburg,?HR?B?202908
> Gesch?ftsf?hrer/General Manager:?Kilian Golm
>
> -----Urspr?ngliche Nachricht-----
> Von: Marek Behun <marek.behun@nic.cz>
> Gesendet: Mittwoch, 15. April 2020 01:53
> An: Moritz Berghof <mberghof@phoenixcontact.com>
> Cc: u-boot mailing list <u-boot@lists.denx.de>
> Betreff: Re: latest u-boot branch for Marvell Armada 88F3720
>
> ***External email! Do not click links or open attachments unless you recognize the sender and know the content is safe.***
>
> Hi Moritz,
>
> could you please compile and test current u-boot master on your EspressoBin? My patches regarding DDR size determination on A3700 were applied and I would like to know if it works correctly for you.
>
> Marek
>
> On Mon, 6 Apr 2020 09:43:27 +0000
> Moritz Berghof <mberghof@phoenixcontact.com> wrote:
>
> > Hi Marek,
> >
> > we use the ESPRESSObin Version V5_0_1. We have 2GB-DDR3 memory size and two chips. On of the one side and the other chip directly on the other side of the board.
> >
> > Have a good day,
> >
> > --
> > Moritz Berghof
> > Software Engineer
> > Tel. +49 30 921028-209<tel:+49%C2%A030%C2%A0921028-204>
> > Fax +49 30 921028-020<tel:+49%C2%A030%C2%A0921028-020>
> > mberghof at phoenixcontact.com<mailto:mberghof@phoenixcontact.com>
> > www.phoenixcontact.com<http://www.phoenixcontact.com/>
> >
> > PHOENIX CONTACT Cyber Security GmbH
> > Richard-Willst?tter-Stra?e 6<x-apple-data-detectors://1/1>
> > D-12489 Berlin<x-apple-data-detectors://1/1>
> > Register Court: AG Charlottenburg, HR B 202908 Gesch?ftsf?hrer/General
> > Manager: Kilian Golm
> >
> > Hi Moritz,
> >
> > which version of EspressoBin do you have? How much RAM, is it DDR3 or
> > DDR4? How many RAM chips are there?
> >
> > Marek
> >
> >
> >
> > .......................................................................................
> > PHOENIX CONTACT Cyber Security GmbH
> > Richard-Willst?tter-Stra?e 6
> > D-12489 Berlin
> >
> > Register Court: AG Charlottenburg, HR B 202908 Gesch?ftsf?hrer/General
> > Manager: Kilian Golm
>
>
> .......................................................................................
> PHOENIX CONTACT Cyber Security GmbH
> Richard-Willst?tter-Stra?e 6
> D-12489 Berlin
>
> Register Court: AG Charlottenburg, HR B 202908
> Gesch?ftsf?hrer/General Manager: Kilian Golm
next prev parent reply other threads:[~2020-04-21 11:11 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-06 9:43 AW: AW: latest u-boot branch for Marvell Armada 88F3720 Moritz Berghof
2020-04-14 23:52 ` Marek Behun
2020-04-21 10:25 ` AW: " Moritz Berghof
2020-04-21 11:11 ` Marek Behun [this message]
2020-04-21 13:56 ` Moritz Berghof
[not found] ` <VI1PR05MB4992654399B1405165482C47A6D20@VI1PR05MB4992.eurprd05.prod.outlook.com>
2020-04-22 9:12 ` Marek Behun
2020-04-22 13:53 ` AW: " Moritz Berghof
[not found] <VI1PR05MB499206310103F9B5AD6713E3A6C70@VI1PR05MB4992.eurprd05.prod.outlook.com>
2020-04-03 18:43 ` Marek Behun
-- strict thread matches above, loose matches on Subject: below --
2020-03-25 15:05 Moritz Berghof
2020-03-25 16:44 ` Stefan Roese
2020-03-25 17:48 ` Marek Behun
2020-03-25 17:57 ` Marek Behun
2020-04-02 11:30 ` AW: " Moritz Berghof
2020-04-02 12:18 ` Stefan Roese
2020-04-02 13:52 ` Marek Behun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200421131144.2e29afba@nic.cz \
--to=marek.behun@nic.cz \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.