From: Alexey Dobriyan <adobriyan@gmail.com>
To: axboe@kernel.dk
Cc: fio@vger.kernel.org, damien.lemoal@wdc.com
Subject: [PATCH] zbd: don't lock zones outside working area
Date: Fri, 24 Apr 2020 00:38:34 +0300 [thread overview]
Message-ID: <20200423213834.GA22728@avx2> (raw)
Currently threads tap into each other zones even if their working areas
as defined by [f->file_offset, f->file_offset + f->io_size) don't intersect.
This should remove unnecessary quiescing in iodepth > 1 workloads.
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
---
file.h | 3 +++
zbd.c | 42 ++++++++++++++++++++++++++++++++----------
2 files changed, 35 insertions(+), 10 deletions(-)
--- a/file.h
+++ b/file.h
@@ -104,6 +104,9 @@ struct fio_file {
* Zoned block device information. See also zonemode=zbd.
*/
struct zoned_block_device_info *zbd_info;
+ /* zonemode=zbd working area */
+ uint32_t min_zone; /* inclusive */
+ uint32_t max_zone; /* exclusive */
/*
* Track last end and last start of IO for a given data direction
--- a/zbd.c
+++ b/zbd.c
@@ -156,8 +156,14 @@ static bool zbd_zone_full(const struct fio_file *f, struct fio_zone_info *z,
z->wp + required > z->start + f->zbd_info->zone_size;
}
-static void zone_lock(struct thread_data *td, struct fio_zone_info *z)
+static void zone_lock(struct thread_data *td, struct fio_file *f, struct fio_zone_info *z)
{
+ struct zoned_block_device_info *zbd = f->zbd_info;
+ uint32_t nz = z - zbd->zone_info;
+
+ /* Thread should never lock zones outside its working area. */
+ assert(f->min_zone <= nz && nz < f->max_zone);
+
/*
* Lock the io_u target zone. The zone will be unlocked if io_u offset
* is changed or when io_u completes and zbd_put_io() executed.
@@ -289,6 +295,9 @@ static bool zbd_verify_sizes(void)
(unsigned long long) new_end - f->file_offset);
f->io_size = new_end - f->file_offset;
}
+
+ f->min_zone = zbd_zone_idx(f, f->file_offset);
+ f->max_zone = zbd_zone_idx(f, f->file_offset + f->io_size);
}
}
@@ -332,6 +341,17 @@ static int ilog2(uint64_t i)
return log;
}
+static uint32_t clamp_u32(uint32_t x, uint32_t min, uint32_t max)
+{
+ if (x < min) {
+ return min;
+ } else if (x > max) {
+ return max;
+ } else {
+ return x;
+ }
+}
+
/*
* Initialize f->zbd_info for devices that are not zoned block devices. This
* allows to execute a ZBD workload against a non-ZBD device.
@@ -735,7 +755,7 @@ static int zbd_reset_zones(struct thread_data *td, struct fio_file *f,
if (!zbd_zone_swr(z))
continue;
- zone_lock(td, z);
+ zone_lock(td, f, z);
if (all_zones) {
unsigned int i;
@@ -958,7 +978,7 @@ static struct fio_zone_info *zbd_convert_to_open_zone(struct thread_data *td,
struct io_u *io_u)
{
const uint32_t min_bs = td->o.min_bs[io_u->ddir];
- const struct fio_file *f = io_u->file;
+ struct fio_file *f = io_u->file;
struct fio_zone_info *z;
unsigned int open_zone_idx = -1;
uint32_t zone_idx, new_zone_idx;
@@ -975,6 +995,7 @@ static struct fio_zone_info *zbd_convert_to_open_zone(struct thread_data *td,
} else {
zone_idx = zbd_zone_idx(f, io_u->offset);
}
+ zone_idx = clamp_u32(zone_idx, f->min_zone, f->max_zone - 1);
dprint(FD_ZBD, "%s(%s): starting from zone %d (offset %lld, buflen %lld)\n",
__func__, f->file_name, zone_idx, io_u->offset, io_u->buflen);
@@ -989,7 +1010,7 @@ static struct fio_zone_info *zbd_convert_to_open_zone(struct thread_data *td,
z = &f->zbd_info->zone_info[zone_idx];
- zone_lock(td, z);
+ zone_lock(td, f, z);
pthread_mutex_lock(&f->zbd_info->mutex);
if (td->o.max_open_zones == 0)
goto examine_zone;
@@ -1015,8 +1036,7 @@ static struct fio_zone_info *zbd_convert_to_open_zone(struct thread_data *td,
if (tmp_idx >= f->zbd_info->num_open_zones)
tmp_idx = 0;
tmpz = f->zbd_info->open_zones[tmp_idx];
-
- if (is_valid_offset(f, f->zbd_info->zone_info[tmpz].start)) {
+ if (f->min_zone <= tmpz && tmpz < f->max_zone) {
open_zone_idx = tmp_idx;
goto found_candidate_zone;
}
@@ -1061,11 +1081,11 @@ examine_zone:
z++;
if (!is_valid_offset(f, z->start)) {
/* Wrap-around. */
- zone_idx = zbd_zone_idx(f, f->file_offset);
+ zone_idx = f->min_zone;
z = &f->zbd_info->zone_info[zone_idx];
}
assert(is_valid_offset(f, z->start));
- zone_lock(td, z);
+ zone_lock(td, f, z);
if (z->open)
continue;
if (zbd_open_zone(td, io_u, zone_idx))
@@ -1078,12 +1098,14 @@ examine_zone:
pthread_mutex_lock(&f->zbd_info->mutex);
for (i = 0; i < f->zbd_info->num_open_zones; i++) {
zone_idx = f->zbd_info->open_zones[i];
+ if (!(f->min_zone <= zone_idx && zone_idx < f->max_zone))
+ continue;
pthread_mutex_unlock(&f->zbd_info->mutex);
pthread_mutex_unlock(&z->mutex);
z = &f->zbd_info->zone_info[zone_idx];
- zone_lock(td, z);
+ zone_lock(td, f, z);
if (z->wp + min_bs <= (z+1)->start)
goto out;
pthread_mutex_lock(&f->zbd_info->mutex);
@@ -1409,7 +1431,7 @@ enum io_u_action zbd_adjust_block(struct thread_data *td, struct io_u *io_u)
zbd_check_swd(f);
- zone_lock(td, zb);
+ zone_lock(td, f, zb);
switch (io_u->ddir) {
case DDIR_READ:
next reply other threads:[~2020-04-23 21:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-23 21:38 Alexey Dobriyan [this message]
2020-04-24 8:17 ` [PATCH] zbd: don't lock zones outside working area Damien Le Moal
2020-04-24 19:55 ` Alexey Dobriyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200423213834.GA22728@avx2 \
--to=adobriyan@gmail.com \
--cc=axboe@kernel.dk \
--cc=damien.lemoal@wdc.com \
--cc=fio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.