[PATCH v2] leds-bcm6328: support second hw blinking interval

["Álvaro Fernández Rojas" <noltari@gmail.com>]

Add support for both configurable HW blinking intervals.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 v2: remove LED from the other interval

 drivers/leds/leds-bcm6328.c | 56 ++++++++++++++++++++++++++-----------
 1 file changed, 40 insertions(+), 16 deletions(-)

diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
index 42e1b7598c3a..a5a57a8d2a1c 100644
--- a/drivers/leds/leds-bcm6328.c
+++ b/drivers/leds/leds-bcm6328.c
@@ -24,12 +24,16 @@
 
 #define BCM6328_LED_MAX_COUNT		24
 #define BCM6328_LED_DEF_DELAY		500
+#define BCM6328_LED_INTERVAL_NUM	2
 #define BCM6328_LED_INTERVAL_MS		20
 
 #define BCM6328_LED_INTV_MASK		0x3f
-#define BCM6328_LED_FAST_INTV_SHIFT	6
-#define BCM6328_LED_FAST_INTV_MASK	(BCM6328_LED_INTV_MASK << \
-					 BCM6328_LED_FAST_INTV_SHIFT)
+#define BCM6328_LED_INTV1_SHIFT		0
+#define BCM6328_LED_INTV1_MASK		(BCM6328_LED_INTV_MASK << \
+					 BCM6328_LED_INTV1_SHIFT)
+#define BCM6328_LED_INTV2_SHIFT		6
+#define BCM6328_LED_INTV2_MASK		(BCM6328_LED_INTV_MASK << \
+					 BCM6328_LED_INTV2_SHIFT)
 #define BCM6328_SERIAL_LED_EN		BIT(12)
 #define BCM6328_SERIAL_LED_MUX		BIT(13)
 #define BCM6328_SERIAL_LED_CLK_NPOL	BIT(14)
@@ -45,8 +49,8 @@
 
 #define BCM6328_LED_MODE_MASK		3
 #define BCM6328_LED_MODE_ON		0
-#define BCM6328_LED_MODE_FAST		1
-#define BCM6328_LED_MODE_BLINK		2
+#define BCM6328_LED_MODE_INTV1		1
+#define BCM6328_LED_MODE_INTV2		2
 #define BCM6328_LED_MODE_OFF		3
 #define BCM6328_LED_SHIFT(X)		((X) << 1)
 
@@ -127,7 +131,8 @@ static void bcm6328_led_set(struct led_classdev *led_cdev,
 	unsigned long flags;
 
 	spin_lock_irqsave(led->lock, flags);
-	*(led->blink_leds) &= ~BIT(led->pin);
+	led->blink_leds[0] &= ~BIT(led->pin);
+	led->blink_leds[1] &= ~BIT(led->pin);
 	if ((led->active_low && value == LED_OFF) ||
 	    (!led->active_low && value != LED_OFF))
 		bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
@@ -176,20 +181,37 @@ static int bcm6328_blink_set(struct led_classdev *led_cdev,
 	}
 
 	spin_lock_irqsave(led->lock, flags);
-	if (*(led->blink_leds) == 0 ||
-	    *(led->blink_leds) == BIT(led->pin) ||
-	    *(led->blink_delay) == delay) {
+	if (led->blink_leds[0] == 0 ||
+	    led->blink_leds[0] == BIT(led->pin) ||
+	    led->blink_delay[0] == delay) {
 		unsigned long val;
 
-		*(led->blink_leds) |= BIT(led->pin);
-		*(led->blink_delay) = delay;
+		led->blink_leds[0] |= BIT(led->pin);
+		led->blink_leds[1] &= ~BIT(led->pin);
+		led->blink_delay[0] = delay;
 
 		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
-		val &= ~BCM6328_LED_FAST_INTV_MASK;
-		val |= (delay << BCM6328_LED_FAST_INTV_SHIFT);
+		val &= ~BCM6328_LED_INTV1_MASK;
+		val |= (delay << BCM6328_LED_INTV1_SHIFT);
 		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
 
-		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK);
+		bcm6328_led_mode(led, BCM6328_LED_MODE_INTV1);
+		rc = 0;
+	} else if (led->blink_leds[1] == 0 ||
+		   led->blink_leds[1] == BIT(led->pin) ||
+		   led->blink_delay[1] == delay) {
+		unsigned long val;
+
+		led->blink_leds[0] &= ~BIT(led->pin);
+		led->blink_leds[1] |= BIT(led->pin);
+		led->blink_delay[1] = delay;
+
+		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
+		val &= ~BCM6328_LED_INTV2_MASK;
+		val |= (delay << BCM6328_LED_INTV2_SHIFT);
+		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
+
+		bcm6328_led_mode(led, BCM6328_LED_MODE_INTV2);
 		rc = 0;
 	} else {
 		dev_dbg(led_cdev->dev,
@@ -358,11 +380,13 @@ static int bcm6328_leds_probe(struct platform_device *pdev)
 	if (!lock)
 		return -ENOMEM;
 
-	blink_leds = devm_kzalloc(dev, sizeof(*blink_leds), GFP_KERNEL);
+	blink_leds = devm_kcalloc(dev, BCM6328_LED_INTERVAL_NUM,
+				  sizeof(*blink_leds), GFP_KERNEL);
 	if (!blink_leds)
 		return -ENOMEM;
 
-	blink_delay = devm_kzalloc(dev, sizeof(*blink_delay), GFP_KERNEL);
+	blink_delay = devm_kcalloc(dev, BCM6328_LED_INTERVAL_NUM,
+				   sizeof(*blink_delay), GFP_KERNEL);
 	if (!blink_delay)
 		return -ENOMEM;
 
-- 
2.20.1