Re: [RESEND PATCH v3 0/3] Add Reset and Wakeup support for CCS811

[Jonathan Cameron <jic23@kernel.org>]

On Wed, 15 Apr 2020 00:19:27 +0530
mani@kernel.org wrote:

> From: Manivannan Sadhasivam <mani@kernel.org>
> 
> Hello,
> 
> This patchset adds external reset and wakeup support for CCS811 VOC
> gas sensor. The nRESET and nWAKE pins available on the device are
> utilised to provide these functionalities.
> 
> The patchset has been validated using CCS811 connected to STM32MP1 based
> board over I2C.
> 
> While at it, the devicetree yaml binding and OF match table for this sensor
> are also added.
> 
> Thanks,
> Mani

All applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> 
> Changes in v3:
> 
> * Added ccs811_set_wake(false) to all error paths before calling it actually
> * Added Andy's reviewed-by tag
> * Added comment for reset procedure and dropped error print for gpio request
> 
> Changes in v2:
> 
> * Fixed DT binding schema and switched to dual license (GPL/BSD)
> * Returned actual error code from devm_gpiod_get_optional()
> * Dropped of.h include and of_match_ptr()
> 
> Manivannan Sadhasivam (3):
>   dt-bindings: iio: chemical: Add binding for CCS811 VOC sensor
>   iio: chemical: Add support for external Reset and Wakeup in CCS811
>   iio: chemical: Add OF match table for CCS811 VOC sensor
> 
>  .../bindings/iio/chemical/ams,ccs811.yaml     |  51 ++++++++
>  drivers/iio/chemical/ccs811.c                 | 112 ++++++++++++++++--
>  2 files changed, 152 insertions(+), 11 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml
>