All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	"David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 1/5] stmmac: intel: Check return value of clk_prepare_enable()
Date: Wed, 29 Apr 2020 17:04:45 +0300	[thread overview]
Message-ID: <20200429140449.9484-1-andriy.shevchenko@linux.intel.com> (raw)

clk_prepare_enable() might fail, we have to check its returned value.

While at it, remove leftover in stmmac_pci, also remove unneeded condition
for NULL-aware clk_unregister_fixed_rate() call and call it when
stmmac_dvr_probe() fails.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-intel.c  | 18 ++++++++++++++----
 .../net/ethernet/stmicro/stmmac/stmmac_pci.c   |  3 ---
 2 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 2e4aaedb93f580..5975c1e850425e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -252,6 +252,7 @@ static void common_default_data(struct plat_stmmacenet_data *plat)
 static int intel_mgbe_common_data(struct pci_dev *pdev,
 				  struct plat_stmmacenet_data *plat)
 {
+	int ret;
 	int i;
 
 	plat->clk_csr = 5;
@@ -324,7 +325,12 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 		dev_warn(&pdev->dev, "Fail to register stmmac-clk\n");
 		plat->stmmac_clk = NULL;
 	}
-	clk_prepare_enable(plat->stmmac_clk);
+
+	ret = clk_prepare_enable(plat->stmmac_clk);
+	if (ret) {
+		clk_unregister_fixed_rate(plat->stmmac_clk);
+		return ret;
+	}
 
 	/* Set default value for multicast hash bins */
 	plat->multicast_filter_bins = HASH_TABLE_SIZE;
@@ -657,7 +663,12 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 	res.wol_irq = pdev->irq;
 	res.irq = pdev->irq;
 
-	return stmmac_dvr_probe(&pdev->dev, plat, &res);
+	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
+	if (ret) {
+		clk_unregister_fixed_rate(plat->stmmac_clk);
+	}
+
+	return ret;
 }
 
 /**
@@ -675,8 +686,7 @@ static void intel_eth_pci_remove(struct pci_dev *pdev)
 
 	stmmac_dvr_remove(&pdev->dev);
 
-	if (priv->plat->stmmac_clk)
-		clk_unregister_fixed_rate(priv->plat->stmmac_clk);
+	clk_unregister_fixed_rate(priv->plat->stmmac_clk);
 
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 3fb21f7ac9fbee..cf6b8f382e504f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -223,9 +223,6 @@ static void stmmac_pci_remove(struct pci_dev *pdev)
 
 	stmmac_dvr_remove(&pdev->dev);
 
-	if (priv->plat->stmmac_clk)
-		clk_unregister_fixed_rate(priv->plat->stmmac_clk);
-
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
 			continue;
-- 
2.26.2


             reply	other threads:[~2020-04-29 14:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-29 14:04 Andy Shevchenko [this message]
2020-04-29 14:04 ` [PATCH v1 2/5] stmmac: intel: Remove unnecessary loop for PCI BARs Andy Shevchenko
2020-04-29 14:04 ` [PATCH v1 3/5] stmmac: intel: Convert to use pci_alloc_irq_vectors() API Andy Shevchenko
2020-04-29 14:04 ` [PATCH v1 4/5] stmmac: intel: Eliminate useless conditions and variables Andy Shevchenko
2020-04-29 14:04 ` [PATCH v1 5/5] stmmac: intel: Fix indentation to put on one line affected code Andy Shevchenko
2020-04-29 14:22 ` [PATCH v1 1/5] stmmac: intel: Check return value of clk_prepare_enable() Andy Shevchenko
2020-04-29 19:13 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200429140449.9484-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=joabreu@synopsys.com \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.