[PATCH 6/6] ARM: dts: omap4-droid4: Configure modem for serdev-ngsm

[Tony Lindgren <tony@atomide.com>]

Let's enable the TS 27.010 /dev/gsmmux* interfaces via Linux n_gsm that
can be used for voice calls and SMS with commands using a custom Motorola
format.

And let's also enable the kernel GNSS driver via serdev-ngsm that uses a
dedicated TS 27.010 channel.

Note that voice call audio mixer is not supported yet.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/motorola-mapphone-common.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -702,6 +702,20 @@ &uart1 {
 			       &omap4_pmx_core 0x110>;
 	uart-has-rtscts;
 	current-speed = <115200>;
+
+	modem {
+		compatible = "motorola,mapphone-mdm6600-serial";
+		ttymask = <0 0x00001fee>;
+		phys = <&fsusb1_phy>;
+		phy-names = "usb";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gnss@4 {
+			compatible = "motorola,mapphone-mdm6600-gnss";
+			reg = <4>;
+		};
+	};
 };
 
 &uart3 {
-- 
2.26.2