From: Sibi Sankar <sibis@codeaurora.org>
To: viresh.kumar@linaro.org, sboyd@kernel.org,
georgi.djakov@linaro.org, bjorn.andersson@linaro.org,
saravanak@google.com, mka@chromium.org
Cc: nm@ti.com, agross@kernel.org, david.brown@linaro.org,
robh+dt@kernel.org, mark.rutland@arm.com, rjw@rjwysocki.net,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
dianders@chromium.org, vincent.guittot@linaro.org,
amit.kucheria@linaro.org, ulf.hansson@linaro.org,
lukasz.luba@arm.com, sudeep.holla@arm.com,
Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH v4 12/12] arm64: dts: qcom: sc7180: Add cpu OPP tables
Date: Tue, 5 May 2020 01:52:43 +0530 [thread overview]
Message-ID: <20200504202243.5476-13-sibis@codeaurora.org> (raw)
In-Reply-To: <20200504202243.5476-1-sibis@codeaurora.org>
Add OPP tables required to scale DDR/L3 per freq-domain on SC7180 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
v4:
https://lore.kernel.org/patchwork/cover/1230626/
* Reworked based on Georgi's bindings
arch/arm64/boot/dts/qcom/sc7180.dtsi | 168 +++++++++++++++++++++++++++
1 file changed, 168 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 4216b574c0803..2421b7bb7dd83 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sc7180.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc7180.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
@@ -100,6 +101,10 @@ &LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ interconnect-tags = <3 0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -123,6 +128,10 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_100>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ interconnect-tags = <3 0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_100: l2-cache {
@@ -142,6 +151,10 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_200>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ interconnect-tags = <3 0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_200: l2-cache {
@@ -161,6 +174,10 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_300>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ interconnect-tags = <3 0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_300: l2-cache {
@@ -180,6 +197,10 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_400>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ interconnect-tags = <3 0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_400: l2-cache {
@@ -199,6 +220,10 @@ &LITTLE_CPU_SLEEP_1
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_500>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ interconnect-tags = <3 0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_500: l2-cache {
@@ -218,6 +243,10 @@ &BIG_CPU_SLEEP_1
capacity-dmips-mhz = <1740>;
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_600>;
+ operating-points-v2 = <&cpu6_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ interconnect-tags = <3 0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
L2_600: l2-cache {
@@ -237,6 +266,10 @@ &BIG_CPU_SLEEP_1
capacity-dmips-mhz = <1740>;
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_700>;
+ operating-points-v2 = <&cpu6_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+ interconnect-tags = <3 0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
L2_700: l2-cache {
@@ -336,6 +369,141 @@ CLUSTER_SLEEP_0: cluster-sleep-0 {
};
};
+ cpu0_opp_table: cpu0_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cpu0_opp1: opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-peak-kBps = <1200000 4800000>;
+ };
+
+ cpu0_opp2: opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ opp-peak-kBps = <1200000 4800000>;
+ };
+
+ cpu0_opp3: opp-768000000 {
+ opp-hz = /bits/ 64 <768000000>;
+ opp-peak-kBps = <1200000 4800000>;
+ };
+
+ cpu0_opp4: opp-1017600000 {
+ opp-hz = /bits/ 64 <1017600000>;
+ opp-peak-kBps = <1804000 8908800>;
+ };
+
+ cpu0_opp5: opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ opp-peak-kBps = <2188000 12902400>;
+ };
+
+ cpu0_opp6: opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ opp-peak-kBps = <2188000 12902400>;
+ };
+
+ cpu0_opp7: opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-peak-kBps = <3072000 15052800>;
+ };
+
+ cpu0_opp8: opp-1612800000 {
+ opp-hz = /bits/ 64 <1612800000>;
+ opp-peak-kBps = <3072000 15052800>;
+ };
+
+ cpu0_opp9: opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <3072000 15052800>;
+ };
+
+ cpu0_opp10: opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <4068000 22425600>;
+ };
+ };
+
+ cpu6_opp_table: cpu6_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cpu6_opp1: opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-peak-kBps = <2188000 8908800>;
+ };
+
+ cpu6_opp2: opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ opp-peak-kBps = <2188000 8908800>;
+ };
+
+ cpu6_opp3: opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ opp-peak-kBps = <2188000 8908800>;
+ };
+
+ cpu6_opp4: opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ opp-peak-kBps = <2188000 8908800>;
+ };
+
+ cpu6_opp5: opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ opp-peak-kBps = <2188000 8908800>;
+ };
+
+ cpu6_opp6: opp-1267200000 {
+ opp-hz = /bits/ 64 <1267200000>;
+ opp-peak-kBps = <4068000 12902400>;
+ };
+
+ cpu6_opp7: opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ opp-peak-kBps = <4068000 15052800>;
+ };
+
+ cpu6_opp8: opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <6220000 19353600>;
+ };
+
+ cpu6_opp9: opp-1843200000 {
+ opp-hz = /bits/ 64 <1843200000>;
+ opp-peak-kBps = <6220000 19353600>;
+ };
+
+ cpu6_opp10: opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-peak-kBps = <6220000 22425600>;
+ };
+
+ cpu6_opp11: opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ opp-peak-kBps = <6220000 22425600>;
+ };
+
+ cpu6_opp12: opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-peak-kBps = <6220000 22425600>;
+ };
+
+ cpu6_opp13: opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-peak-kBps = <7216000 22425600>;
+ };
+
+ cpu6_opp14: opp-2323200000 {
+ opp-hz = /bits/ 64 <2323200000>;
+ opp-peak-kBps = <7216000 22425600>;
+ };
+
+ cpu6_opp15: opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ opp-peak-kBps = <8532000 23347200>;
+ };
+ };
+
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-05-04 20:25 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-04 20:22 [PATCH v4 00/12] DDR/L3 Scaling support on SDM845 and SC7180 SoCs Sibi Sankar
2020-05-04 20:22 ` [PATCH v4 01/12] arm64: dts: qcom: sdm845: Add SoC compatible to MTP Sibi Sankar
2020-05-06 12:32 ` Amit Kucheria
2020-05-04 20:22 ` [PATCH v4 02/12] cpufreq: blacklist SDM845 in cpufreq-dt-platdev Sibi Sankar
2020-05-06 12:32 ` Amit Kucheria
2020-05-04 20:22 ` [PATCH v4 03/12] cpufreq: blacklist SC7180 " Sibi Sankar
2020-05-06 12:33 ` Amit Kucheria
2020-05-04 20:22 ` [PATCH v4 04/12] OPP: Add and export helper to update voltage Sibi Sankar
2020-05-05 4:45 ` Viresh Kumar
2020-05-05 7:16 ` Sibi Sankar
2020-05-04 20:22 ` [PATCH v4 05/12] OPP: Add and export helper to set bandwidth Sibi Sankar
2020-05-04 20:22 ` [PATCH v4 06/12] cpufreq: qcom: Update the bandwidth levels on frequency change Sibi Sankar
2020-05-05 4:50 ` Viresh Kumar
2020-05-05 7:19 ` Sibi Sankar
2020-05-26 17:48 ` Sibi Sankar
2020-05-27 3:53 ` Viresh Kumar
2020-05-27 4:05 ` Viresh Kumar
2020-05-04 20:22 ` [PATCH v4 07/12] OPP: Add and export helper to get icc path count Sibi Sankar
2020-05-04 22:03 ` Saravana Kannan
2020-05-05 7:36 ` Sibi Sankar
2020-05-04 20:22 ` [PATCH v4 08/12] cpufreq: qcom: Disable fast switch when scaling ddr/l3 Sibi Sankar
2020-05-04 20:22 ` [PATCH v4 09/12] dt-bindings: interconnect: Add interconnect-tags bindings Sibi Sankar
2020-05-04 20:22 ` [PATCH v4 10/12] OPP: Add support for setting interconnect-tags Sibi Sankar
2020-05-05 4:56 ` Viresh Kumar
2020-05-05 7:17 ` Sibi Sankar
2020-05-04 20:22 ` [PATCH v4 11/12] arm64: dts: qcom: sdm845: Add cpu OPP tables Sibi Sankar
2020-05-04 20:22 ` Sibi Sankar [this message]
2020-05-06 12:38 ` [PATCH v4 00/12] DDR/L3 Scaling support on SDM845 and SC7180 SoCs Amit Kucheria
2020-05-06 14:41 ` Sibi Sankar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200504202243.5476-13-sibis@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=agross@kernel.org \
--cc=amit.kucheria@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=georgi.djakov@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=mark.rutland@arm.com \
--cc=mka@chromium.org \
--cc=nm@ti.com \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=saravanak@google.com \
--cc=sboyd@kernel.org \
--cc=sudeep.holla@arm.com \
--cc=ulf.hansson@linaro.org \
--cc=vincent.guittot@linaro.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.