All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [PULL 11/30] vmdk: Fix zero cluster allocation
Date: Fri,  8 May 2020 14:41:16 +0200	[thread overview]
Message-ID: <20200508124135.252565-12-kwolf@redhat.com> (raw)
In-Reply-To: <20200508124135.252565-1-kwolf@redhat.com>

m_data must contain valid data even for zero clusters when no cluster
was allocated in the image file. Without this, zero writes segfault with
images that have zeroed_grain=on.

For zero writes, we don't want to allocate a cluster in the image file
even in compressed files.

Fixes: 524089bce43fd1cd3daaca979872451efa2cf7c6
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/vmdk.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/block/vmdk.c b/block/vmdk.c
index ecfb4a86d2..fcd6b38d64 100644
--- a/block/vmdk.c
+++ b/block/vmdk.c
@@ -1572,6 +1572,12 @@ static int get_cluster_offset(BlockDriverState *bs,
     extent->l2_cache_counts[min_index] = 1;
  found:
     l2_index = ((offset >> 9) / extent->cluster_sectors) % extent->l2_size;
+    if (m_data) {
+        m_data->l1_index = l1_index;
+        m_data->l2_index = l2_index;
+        m_data->l2_offset = l2_offset;
+        m_data->l2_cache_entry = ((uint32_t *)l2_table) + l2_index;
+    }
 
     if (extent->sesparse) {
         cluster_sector = le64_to_cpu(((uint64_t *)l2_table)[l2_index]);
@@ -1631,10 +1637,6 @@ static int get_cluster_offset(BlockDriverState *bs,
         }
         if (m_data) {
             m_data->new_allocation = true;
-            m_data->l1_index = l1_index;
-            m_data->l2_index = l2_index;
-            m_data->l2_offset = l2_offset;
-            m_data->l2_cache_entry = ((uint32_t *)l2_table) + l2_index;
         }
     }
     *cluster_offset = cluster_sector << BDRV_SECTOR_BITS;
@@ -1990,7 +1992,7 @@ static int vmdk_pwritev(BlockDriverState *bs, uint64_t offset,
                 error_report("Could not write to allocated cluster"
                               " for streamOptimized");
                 return -EIO;
-            } else {
+            } else if (!zeroed) {
                 /* allocate */
                 ret = get_cluster_offset(bs, extent, &m_data, offset,
                                          true, &cluster_offset, 0, 0);
-- 
2.25.3



  parent reply	other threads:[~2020-05-08 12:48 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-08 12:41 [PULL 00/30] Block layer patches Kevin Wolf
2020-05-08 12:41 ` [PULL 01/30] iotests: handle tmpfs Kevin Wolf
2020-05-08 12:41 ` [PULL 02/30] iotests/082: require bochs Kevin Wolf
2020-05-08 12:41 ` [PULL 03/30] iotests/148: use skip_if_unsupported Kevin Wolf
2020-05-08 12:41 ` [PULL 04/30] iotests/041: drop self.assert_no_active_block_jobs() Kevin Wolf
2020-05-08 12:41 ` [PULL 05/30] iotests/055: refactor compressed backup to vmdk Kevin Wolf
2020-05-08 12:41 ` [PULL 06/30] iotests/055: skip vmdk target tests if vmdk is not whitelisted Kevin Wolf
2020-05-08 12:41 ` [PULL 07/30] iotests/109: mark required formats as required to support whitelisting Kevin Wolf
2020-05-08 12:41 ` [PULL 08/30] iotests/113: mark bochs " Kevin Wolf
2020-05-08 12:41 ` [PULL 09/30] qcow2: Avoid integer wraparound in qcow2_co_truncate() Kevin Wolf
2020-05-08 12:41 ` [PULL 10/30] vmdk: Rename VmdkMetaData.valid to new_allocation Kevin Wolf
2020-05-08 12:41 ` Kevin Wolf [this message]
2020-05-08 12:41 ` [PULL 12/30] vmdk: Fix partial overwrite of zero cluster Kevin Wolf
2020-05-08 12:41 ` [PULL 13/30] vmdk: Don't update L2 table for zero write on " Kevin Wolf
2020-05-08 12:41 ` [PULL 14/30] vmdk: Flush only once in vmdk_L2update() Kevin Wolf
2020-05-08 12:41 ` [PULL 15/30] iotests: vmdk: Enable zeroed_grained=on by default Kevin Wolf
2020-05-08 12:41 ` [PULL 16/30] iotests/283: Use consistent size for source and target Kevin Wolf
2020-05-08 12:41 ` [PULL 17/30] backup: Improve error for bdrv_getlength() failure Kevin Wolf
2020-05-08 12:41 ` [PULL 18/30] backup: Make sure that source and target size match Kevin Wolf
2020-05-08 12:41 ` [PULL 19/30] iotests: Backup with different source/target size Kevin Wolf
2020-05-08 12:41 ` [PULL 20/30] iotests/055: Use cache.no-flush for vmdk target Kevin Wolf
2020-05-08 12:41 ` [PULL 21/30] qcow2: Fix preallocation on block devices Kevin Wolf
2020-05-08 12:41 ` [PULL 22/30] gluster: Drop useless has_zero_init callback Kevin Wolf
2020-05-08 12:41 ` [PULL 23/30] file-win32: Support BDRV_REQ_ZERO_WRITE for truncate Kevin Wolf
2020-05-08 12:41 ` [PULL 24/30] nfs: " Kevin Wolf
2020-05-08 12:41 ` [PULL 25/30] rbd: " Kevin Wolf
2020-05-08 12:41 ` [PULL 26/30] sheepdog: " Kevin Wolf
2020-05-08 12:41 ` [PULL 27/30] ssh: " Kevin Wolf
2020-05-08 12:41 ` [PULL 28/30] parallels: Rework truncation logic Kevin Wolf
2020-05-08 12:41 ` [PULL 29/30] vhdx: " Kevin Wolf
2020-05-08 12:41 ` [PULL 30/30] block: Drop unused .bdrv_has_zero_init_truncate Kevin Wolf
2020-05-08 15:10 ` [PULL 00/30] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200508124135.252565-12-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.