From: Ard Biesheuvel <ardb@kernel.org>
To: linux-efi@vger.kernel.org, Ingo Molnar <mingo@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>
Cc: Ard Biesheuvel <ardb@kernel.org>,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Arvind Sankar <nivedita@alum.mit.edu>,
Guenter Roeck <linux@roeck-us.net>, Joe Perches <joe@perches.com>
Subject: [PATCH 09/15] efi/libstub: Unify initrd loading across architectures
Date: Fri, 8 May 2020 20:01:51 +0200 [thread overview]
Message-ID: <20200508180157.1816-10-ardb@kernel.org> (raw)
In-Reply-To: <20200508180157.1816-1-ardb@kernel.org>
From: Arvind Sankar <nivedita@alum.mit.edu>
Factor out the initrd loading into a common function that can be called
both from the generic efi-stub.c and the x86-specific x86-stub.c.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-10-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
.../firmware/efi/libstub/efi-stub-helper.c | 46 +++++++++++++++++--
drivers/firmware/efi/libstub/efi-stub.c | 12 +----
drivers/firmware/efi/libstub/efistub.h | 21 ++-------
drivers/firmware/efi/libstub/x86-stub.c | 13 +-----
4 files changed, 52 insertions(+), 40 deletions(-)
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index 1c92ac231f94..7aac89e928ec 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -331,6 +331,7 @@ static const struct {
* %EFI_OUT_OF_RESOURCES if memory allocation failed
* %EFI_LOAD_ERROR in all other cases
*/
+static
efi_status_t efi_load_initrd_dev_path(unsigned long *load_addr,
unsigned long *load_size,
unsigned long max)
@@ -343,9 +344,6 @@ efi_status_t efi_load_initrd_dev_path(unsigned long *load_addr,
efi_handle_t handle;
efi_status_t status;
- if (!load_addr || !load_size)
- return EFI_INVALID_PARAMETER;
-
dp = (efi_device_path_protocol_t *)&initrd_dev_path;
status = efi_bs_call(locate_device_path, &lf2_proto_guid, &dp, &handle);
if (status != EFI_SUCCESS)
@@ -375,3 +373,45 @@ efi_status_t efi_load_initrd_dev_path(unsigned long *load_addr,
*load_size = initrd_size;
return EFI_SUCCESS;
}
+
+static
+efi_status_t efi_load_initrd_cmdline(efi_loaded_image_t *image,
+ unsigned long *load_addr,
+ unsigned long *load_size,
+ unsigned long soft_limit,
+ unsigned long hard_limit)
+{
+ if (!IS_ENABLED(CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER) ||
+ (IS_ENABLED(CONFIG_X86) && (!efi_is_native() || image == NULL))) {
+ *load_addr = *load_size = 0;
+ return EFI_SUCCESS;
+ }
+
+ return handle_cmdline_files(image, L"initrd=", sizeof(L"initrd=") - 2,
+ soft_limit, hard_limit,
+ load_addr, load_size);
+}
+
+efi_status_t efi_load_initrd(efi_loaded_image_t *image,
+ unsigned long *load_addr,
+ unsigned long *load_size,
+ unsigned long soft_limit,
+ unsigned long hard_limit)
+{
+ efi_status_t status;
+
+ if (!load_addr || !load_size)
+ return EFI_INVALID_PARAMETER;
+
+ status = efi_load_initrd_dev_path(load_addr, load_size, hard_limit);
+ if (status == EFI_SUCCESS) {
+ efi_info("Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path\n");
+ } else if (status == EFI_NOT_FOUND) {
+ status = efi_load_initrd_cmdline(image, load_addr, load_size,
+ soft_limit, hard_limit);
+ if (status == EFI_SUCCESS && *load_size > 0)
+ efi_info("Loaded initrd from command line option\n");
+ }
+
+ return status;
+}
diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
index cb02e8bb6b44..63541c2440ef 100644
--- a/drivers/firmware/efi/libstub/efi-stub.c
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -265,16 +265,8 @@ efi_status_t efi_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg)
if (!efi_noinitrd) {
max_addr = efi_get_max_initrd_addr(dram_base, image_addr);
- status = efi_load_initrd_dev_path(&initrd_addr, &initrd_size,
- max_addr);
- if (status == EFI_SUCCESS) {
- efi_info("Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path\n");
- } else if (status == EFI_NOT_FOUND) {
- status = efi_load_initrd(image, &initrd_addr, &initrd_size,
- ULONG_MAX, max_addr);
- if (status == EFI_SUCCESS && initrd_size > 0)
- efi_info("Loaded initrd from command line option\n");
- }
+ status = efi_load_initrd(image, &initrd_addr, &initrd_size,
+ ULONG_MAX, max_addr);
if (status != EFI_SUCCESS)
efi_err("Failed to load initrd!\n");
}
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index 8c905a1be1b4..874233cf8820 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -677,21 +677,10 @@ static inline efi_status_t efi_load_dtb(efi_loaded_image_t *image,
ULONG_MAX, ULONG_MAX, load_addr, load_size);
}
-static inline efi_status_t efi_load_initrd(efi_loaded_image_t *image,
- unsigned long *load_addr,
- unsigned long *load_size,
- unsigned long soft_limit,
- unsigned long hard_limit)
-{
- if (!IS_ENABLED(CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER))
- return EFI_SUCCESS;
-
- return handle_cmdline_files(image, L"initrd=", sizeof(L"initrd=") - 2,
- soft_limit, hard_limit, load_addr, load_size);
-}
-
-efi_status_t efi_load_initrd_dev_path(unsigned long *load_addr,
- unsigned long *load_size,
- unsigned long max);
+efi_status_t efi_load_initrd(efi_loaded_image_t *image,
+ unsigned long *load_addr,
+ unsigned long *load_size,
+ unsigned long soft_limit,
+ unsigned long hard_limit);
#endif
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index defeb6035109..f1a134596b53 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -755,17 +755,8 @@ unsigned long efi_main(efi_handle_t handle,
if (!efi_noinitrd) {
unsigned long addr, size;
- status = efi_load_initrd_dev_path(&addr, &size, ULONG_MAX);
- if (status == EFI_NOT_FOUND) {
- if (efi_is_native() && image != NULL) {
- status = efi_load_initrd(image, &addr, &size,
- hdr->initrd_addr_max,
- ULONG_MAX);
- } else {
- addr = size = 0;
- status = EFI_SUCCESS;
- }
- }
+ status = efi_load_initrd(image, &addr, &size,
+ hdr->initrd_addr_max, ULONG_MAX);
if (status != EFI_SUCCESS) {
efi_err("Failed to load initrd!\n");
--
2.17.1
next prev parent reply other threads:[~2020-05-08 18:03 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 18:01 [GIT PULL 00/15] More EFI changes for v5.8 Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 01/15] efi/x86: Use correct size for boot_params Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 02/15] efi/libstub: Add a helper function to split 64-bit values Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 03/15] efi/libstub: Move pr_efi/pr_efi_err into efi namespace Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 04/15] efi/x86: Use efi_err for error messages Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 05/15] efi/gop: " Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 06/15] efi/tpm: " Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 07/15] efi/libstub: Upgrade ignored dtb= argument message to error Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 08/15] efi/x86: Move command-line initrd loading to efi_main Ard Biesheuvel
2020-05-27 22:30 ` Williams, Dan J
2020-05-27 22:46 ` Arvind Sankar
2020-05-27 22:56 ` Dan Williams
2020-05-27 23:02 ` Arvind Sankar
2020-05-27 23:13 ` Dan Williams
2020-05-27 23:26 ` [PATCH] efi/x86: Don't blow away existing initrd Arvind Sankar
2020-05-28 6:34 ` Ard Biesheuvel
2020-05-08 18:01 ` Ard Biesheuvel [this message]
2020-05-08 18:01 ` [PATCH 10/15] efi/x86: Support builtin command line Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 11/15] efi/libstub: Check return value of efi_parse_options Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 12/15] efi/libstub: Fix mixed mode boot issue after macro refactor Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 13/15] efi/libstub/x86: Work around LLVM ELF quirk build regression Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 14/15] efi/libstub: Make efi_printk() input argument const char* Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 15/15] efi/libstub: Correct comment typos Ard Biesheuvel
2020-05-14 9:05 ` [GIT PULL 00/15] More EFI changes for v5.8 Ard Biesheuvel
2020-05-20 7:20 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200508180157.1816-10-ardb@kernel.org \
--to=ardb@kernel.org \
--cc=arnd@arndb.de \
--cc=joe@perches.com \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mingo@kernel.org \
--cc=nivedita@alum.mit.edu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.