All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jon Derrick <jonathan.derrick@intel.com>
To: <linux-pci@vger.kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Russell King <rmk+kernel@armlinux.org.uk>,
	Bjorn Helgaas <helgaas@kernel.org>,
	Christoph Hellwig <hch@lst.de>, Rob Herring <robh@kernel.org>,
	Jon Derrick <jonathan.derrick@intel.com>
Subject: [PATCH v2 4/4] PCI: pci-bridge-emul: Eliminate the 'reserved' member
Date: Mon, 11 May 2020 12:21:17 -0400	[thread overview]
Message-ID: <20200511162117.6674-5-jonathan.derrick@intel.com> (raw)
In-Reply-To: <20200511162117.6674-1-jonathan.derrick@intel.com>

Per PCIe 5.0 r1.0, Terms and Acronyms, Page 80:

  Reserved register fields must be read only and must return 0 (all 0's
  for multi-bit fields) when read. Reserved encodings for register and
  packet fields must not be used. Any implementation dependence on a
  Reserved field value or encoding will result in an implementation that
  is not PCI Express-compliant.

This patch ensures reads will return 0 for any bit not in the Read-Only,
Read-Write, or Write-1-to-Clear bitmasks.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
---
 drivers/pci/pci-bridge-emul.c | 30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/pci-bridge-emul.c b/drivers/pci/pci-bridge-emul.c
index 6b1949995dee..ccf26d12ec61 100644
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -24,6 +24,17 @@
 #define PCI_CAP_PCIE_START	PCI_BRIDGE_CONF_END
 #define PCI_CAP_PCIE_END	(PCI_CAP_PCIE_START + PCI_EXP_SLTSTA2 + 2)
 
+/**
+ * struct pci_bridge_reg_behavior - register bits behaviors
+ * @ro:		Read-Only bits
+ * @rw:		Read-Write bits
+ * @w1c:	Write-1-to-Clear bits
+ *
+ * Reads and Writes will be filtered by specified behavior. All other bits not
+ * declared are assumed 'Reserved' and will return 0 on reads, per PCIe 5.0:
+ * "Reserved register fields must be read only and must return 0 (all 0's for
+ * multi-bit fields) when read".
+ */
 struct pci_bridge_reg_behavior {
 	/* Read-only bits */
 	u32 ro;
@@ -33,9 +44,6 @@ struct pci_bridge_reg_behavior {
 
 	/* Write-1-to-clear bits */
 	u32 w1c;
-
-	/* Reserved bits (hardwired to 0) */
-	u32 rsvd;
 };
 
 static const struct pci_bridge_reg_behavior pci_regs_behavior[] = {
@@ -49,7 +57,6 @@ static const struct pci_bridge_reg_behavior pci_regs_behavior[] = {
 			PCI_COMMAND_FAST_BACK) |
 		       (PCI_STATUS_CAP_LIST | PCI_STATUS_66MHZ |
 			PCI_STATUS_FAST_BACK | PCI_STATUS_DEVSEL_MASK) << 16),
-		.rsvd = GENMASK(15, 10) | ((BIT(6) | GENMASK(3, 0)) << 16),
 		.w1c = PCI_STATUS_ERROR_BITS << 16,
 	},
 	[PCI_CLASS_REVISION / 4] = { .ro = ~0 },
@@ -96,8 +103,6 @@ static const struct pci_bridge_reg_behavior pci_regs_behavior[] = {
 		       GENMASK(11, 8) | GENMASK(3, 0)),
 
 		.w1c = PCI_STATUS_ERROR_BITS << 16,
-
-		.rsvd = ((BIT(6) | GENMASK(4, 0)) << 16),
 	},
 
 	[PCI_MEMORY_BASE / 4] = {
@@ -130,12 +135,10 @@ static const struct pci_bridge_reg_behavior pci_regs_behavior[] = {
 
 	[PCI_CAPABILITY_LIST / 4] = {
 		.ro = GENMASK(7, 0),
-		.rsvd = GENMASK(31, 8),
 	},
 
 	[PCI_ROM_ADDRESS1 / 4] = {
 		.rw = GENMASK(31, 11) | BIT(0),
-		.rsvd = GENMASK(10, 1),
 	},
 
 	/*
@@ -158,8 +161,6 @@ static const struct pci_bridge_reg_behavior pci_regs_behavior[] = {
 		.ro = (GENMASK(15, 8) | ((PCI_BRIDGE_CTL_FAST_BACK) << 16)),
 
 		.w1c = BIT(10) << 16,
-
-		.rsvd = (GENMASK(15, 12) | BIT(4)) << 16,
 	},
 };
 
@@ -186,13 +187,11 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
 		 */
 		.w1c = (BIT(6) | GENMASK(3, 0)) << 16,
 		.ro = GENMASK(5, 4) << 16,
-		.rsvd = GENMASK(15, 7) << 16,
 	},
 
 	[PCI_EXP_LNKCAP / 4] = {
 		/* All bits are RO, except bit 23 which is reserved */
 		.ro = lower_32_bits(~BIT(23)),
-		.rsvd = BIT(23),
 	},
 
 	[PCI_EXP_LNKCTL / 4] = {
@@ -206,7 +205,6 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
 		.rw = GENMASK(15, 14) | GENMASK(11, 3) | GENMASK(1, 0),
 		.ro = GENMASK(13, 0) << 16,
 		.w1c = GENMASK(15, 14) << 16,
-		.rsvd = GENMASK(13, 12) | BIT(2),
 	},
 
 	[PCI_EXP_SLTCAP / 4] = {
@@ -227,7 +225,6 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
 			PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC) << 16,
 		.ro = (PCI_EXP_SLTSTA_MRLSS | PCI_EXP_SLTSTA_PDS |
 		       PCI_EXP_SLTSTA_EIS) << 16,
-		.rsvd = GENMASK(15) | (GENMASK(15, 9) << 16),
 	},
 
 	[PCI_EXP_RTCTL / 4] = {
@@ -241,7 +238,6 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
 		       PCI_EXP_RTCTL_SEFEE | PCI_EXP_RTCTL_PMEIE |
 		       PCI_EXP_RTCTL_CRSSVE),
 		.ro = PCI_EXP_RTCAP_CRSVIS << 16,
-		.rsvd = GENMASK(15, 5) | (GENMASK(15, 1) << 16),
 	},
 
 	[PCI_EXP_RTSTA / 4] = {
@@ -251,7 +247,6 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
 		 */
 		.ro = GENMASK(15, 0) | PCI_EXP_RTSTA_PENDING,
 		.w1c = PCI_EXP_RTSTA_PME,
-		.rsvd = GENMASK(31, 18),
 	},
 };
 
@@ -359,7 +354,8 @@ int pci_bridge_emul_conf_read(struct pci_bridge_emul *bridge, int where,
 	 * Make sure we never return any reserved bit with a value
 	 * different from 0.
 	 */
-	*value &= ~behavior[reg / 4].rsvd;
+	*value &= behavior[reg / 4].ro | behavior[reg / 4].rw |
+		  behavior[reg / 4].w1c;
 
 	if (size == 1)
 		*value = (*value >> (8 * (where & 3))) & 0xff;
-- 
2.18.1


  parent reply	other threads:[~2020-05-11 16:37 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-11 16:21 [PATCH v2 0/4] Align PCI Emul Bridge to PCIe 5.0 Jon Derrick
2020-05-11 16:21 ` [PATCH v2 1/4] PCI: pci-bridge-emul: Fix PCIe bit conflicts Jon Derrick
2020-05-11 16:21 ` [PATCH v2 2/4] PCI: pci-bridge-emul: Fix Root Cap/Status comment Jon Derrick
2020-05-11 16:21 ` [PATCH v2 3/4] PCI: pci-bridge-emul: Update for PCIe 5.0 r1.0 Jon Derrick
2020-05-20 22:39   ` Rob Herring
2020-05-11 16:21 ` Jon Derrick [this message]
2020-05-20 22:41   ` [PATCH v2 4/4] PCI: pci-bridge-emul: Eliminate the 'reserved' member Rob Herring
2020-05-22 11:42 ` [PATCH v2 0/4] Align PCI Emul Bridge to PCIe 5.0 Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200511162117.6674-5-jonathan.derrick@intel.com \
    --to=jonathan.derrick@intel.com \
    --cc=hch@lst.de \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=robh@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.