From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Georgi Djakov <georgi.djakov@linaro.org>
Cc: linux-pm@vger.kernel.org, evgreen@chromium.org, mka@chromium.org,
akashast@codeaurora.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] interconnect: Add helpers for enabling/disabling a path
Date: Tue, 12 May 2020 14:59:15 -0700 [thread overview]
Message-ID: <20200512215915.GL2165@builder.lan> (raw)
In-Reply-To: <20200507120846.8354-1-georgi.djakov@linaro.org>
On Thu 07 May 05:08 PDT 2020, Georgi Djakov wrote:
> There is a repeated pattern in multiple drivers where they want to switch
> the bandwidth between zero and some other value. This is happening often
> in the suspend/resume callbacks. Let's add helper functions to enable and
> disable the path, so that callers don't have to take care of remembering
> the bandwidth values and handle this in the framework instead.
>
> With this patch the users can call icc_disable() and icc_enable() to lower
> their bandwidth request to zero and then restore it back to it's previous
> value.
>
> Suggested-by: Evan Green <evgreen@chromium.org>
> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Nice
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> v2: https://lore.kernel.org/r/20200428091650.27669-1-georgi.djakov@linaro.org/
> * Extract the common code into __icc_enable() (Matthias)
>
>
> drivers/interconnect/core.c | 39 ++++++++++++++++++++++++++++++++-
> drivers/interconnect/internal.h | 2 ++
> include/linux/interconnect.h | 12 ++++++++++
> 3 files changed, 52 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c
> index f5699ed34e43..d5e0f93c942d 100644
> --- a/drivers/interconnect/core.c
> +++ b/drivers/interconnect/core.c
> @@ -158,6 +158,7 @@ static struct icc_path *path_init(struct device *dev, struct icc_node *dst,
> hlist_add_head(&path->reqs[i].req_node, &node->req_list);
> path->reqs[i].node = node;
> path->reqs[i].dev = dev;
> + path->reqs[i].enabled = true;
> /* reference to previous node was saved during path traversal */
> node = node->reverse;
> }
> @@ -249,9 +250,12 @@ static int aggregate_requests(struct icc_node *node)
> if (p->pre_aggregate)
> p->pre_aggregate(node);
>
> - hlist_for_each_entry(r, &node->req_list, req_node)
> + hlist_for_each_entry(r, &node->req_list, req_node) {
> + if (!r->enabled)
> + continue;
> p->aggregate(node, r->tag, r->avg_bw, r->peak_bw,
> &node->avg_bw, &node->peak_bw);
> + }
>
> return 0;
> }
> @@ -571,6 +575,39 @@ int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw)
> }
> EXPORT_SYMBOL_GPL(icc_set_bw);
>
> +static int __icc_enable(struct icc_path *path, bool enable)
> +{
> + int i;
> +
> + if (!path)
> + return 0;
> +
> + if (WARN_ON(IS_ERR(path) || !path->num_nodes))
> + return -EINVAL;
> +
> + mutex_lock(&icc_lock);
> +
> + for (i = 0; i < path->num_nodes; i++)
> + path->reqs[i].enabled = enable;
> +
> + mutex_unlock(&icc_lock);
> +
> + return icc_set_bw(path, path->reqs[0].avg_bw,
> + path->reqs[0].peak_bw);
> +}
> +
> +int icc_disable(struct icc_path *path)
> +{
> + return __icc_enable(path, false);
> +}
> +EXPORT_SYMBOL_GPL(icc_disable);
> +
> +int icc_enable(struct icc_path *path)
> +{
> + return __icc_enable(path, true);
> +}
> +EXPORT_SYMBOL_GPL(icc_enable);
> +
> /**
> * icc_get() - return a handle for path between two endpoints
> * @dev: the device requesting the path
> diff --git a/drivers/interconnect/internal.h b/drivers/interconnect/internal.h
> index bf18cb7239df..f5f82a5c939e 100644
> --- a/drivers/interconnect/internal.h
> +++ b/drivers/interconnect/internal.h
> @@ -14,6 +14,7 @@
> * @req_node: entry in list of requests for the particular @node
> * @node: the interconnect node to which this constraint applies
> * @dev: reference to the device that sets the constraints
> + * @enabled: indicates whether the path with this request is enabled
> * @tag: path tag (optional)
> * @avg_bw: an integer describing the average bandwidth in kBps
> * @peak_bw: an integer describing the peak bandwidth in kBps
> @@ -22,6 +23,7 @@ struct icc_req {
> struct hlist_node req_node;
> struct icc_node *node;
> struct device *dev;
> + bool enabled;
> u32 tag;
> u32 avg_bw;
> u32 peak_bw;
> diff --git a/include/linux/interconnect.h b/include/linux/interconnect.h
> index 770692421f4c..2b7b331c9354 100644
> --- a/include/linux/interconnect.h
> +++ b/include/linux/interconnect.h
> @@ -30,6 +30,8 @@ struct icc_path *icc_get(struct device *dev, const int src_id,
> struct icc_path *of_icc_get(struct device *dev, const char *name);
> struct icc_path *devm_of_icc_get(struct device *dev, const char *name);
> void icc_put(struct icc_path *path);
> +int icc_disable(struct icc_path *path);
> +int icc_enable(struct icc_path *path);
> int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw);
> void icc_set_tag(struct icc_path *path, u32 tag);
>
> @@ -57,6 +59,16 @@ static inline void icc_put(struct icc_path *path)
> {
> }
>
> +static inline int icc_disable(struct icc_path *path)
> +{
> + return 0;
> +}
> +
> +static inline int icc_enable(struct icc_path *path)
> +{
> + return 0;
> +}
> +
> static inline int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw)
> {
> return 0;
prev parent reply other threads:[~2020-05-12 22:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-07 12:08 [PATCH v2] interconnect: Add helpers for enabling/disabling a path Georgi Djakov
2020-05-07 15:57 ` Matthias Kaehlcke
2020-05-12 21:59 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200512215915.GL2165@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=akashast@codeaurora.org \
--cc=evgreen@chromium.org \
--cc=georgi.djakov@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mka@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.