All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthias Kaehlcke <mka@chromium.org>
To: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Cc: linux-bluetooth@vger.kernel.org, bgodavar@codeaurora.org,
	alainm@chromium.org, marcel@holtmann.org,
	chromeos-bluetooth-upstreaming@chromium.org,
	Johan Hedberg <johan.hedberg@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] Bluetooth: hci_qca: Enable WBS support for wcn3991
Date: Thu, 14 May 2020 14:07:24 -0700	[thread overview]
Message-ID: <20200514210724.GQ4525@google.com> (raw)
In-Reply-To: <20200514131338.v2.1.I68404fc395a3dbc57c8a89ca02490013e8003a87@changeid>

Hi Abhishek,

On Thu, May 14, 2020 at 01:14:04PM -0700, Abhishek Pandit-Subedi wrote:
> WCN3991 supports transparent WBS (host encoded mSBC). Add a flag to the
> device match data to show WBS is supported.
> 
> This requires the matching firmware for WCN3991 in linux-firmware:
>         1a8b0dc00f77 (qca: Enable transparent WBS for WCN3991)
> 
> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
> ---
> 
> Changes in v2:
> - Rename struct to qca_capabilities and fix enum naming
> 
>  drivers/bluetooth/hci_qca.c | 23 +++++++++++++++++------
>  1 file changed, 17 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index b3fd07a6f8127..96799644f0933 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -75,6 +75,9 @@ enum qca_flags {
>  	QCA_HW_ERROR_EVENT
>  };
>  
> +enum qca_capabilities {
> +	QCA_CAP_WIDEBAND_SPEECH_SUPPORTED = BIT(0),

nit: the '_SUPPORTED' suffix seems somewhat redundant, given that this
is a capability (as 'CAP' indicates). Up to you if you want to keep it.

> +};
>  
>  /* HCI_IBS transmit side sleep protocol states */
>  enum tx_ibs_states {
> @@ -187,10 +190,11 @@ struct qca_vreg {
>  	unsigned int load_uA;
>  };
>  
> -struct qca_vreg_data {
> +struct qca_device_data {
>  	enum qca_btsoc_type soc_type;
>  	struct qca_vreg *vregs;
>  	size_t num_vregs;
> +	uint32_t capabilities;
>  };
>  
>  /*
> @@ -1691,7 +1695,7 @@ static const struct hci_uart_proto qca_proto = {
>  	.dequeue	= qca_dequeue,
>  };
>  
> -static const struct qca_vreg_data qca_soc_data_wcn3990 = {
> +static const struct qca_device_data qca_soc_data_wcn3990 = {
>  	.soc_type = QCA_WCN3990,
>  	.vregs = (struct qca_vreg []) {
>  		{ "vddio", 15000  },
> @@ -1702,7 +1706,7 @@ static const struct qca_vreg_data qca_soc_data_wcn3990 = {
>  	.num_vregs = 4,
>  };
>  
> -static const struct qca_vreg_data qca_soc_data_wcn3991 = {
> +static const struct qca_device_data qca_soc_data_wcn3991 = {
>  	.soc_type = QCA_WCN3991,
>  	.vregs = (struct qca_vreg []) {
>  		{ "vddio", 15000  },
> @@ -1711,9 +1715,10 @@ static const struct qca_vreg_data qca_soc_data_wcn3991 = {
>  		{ "vddch0", 450000 },
>  	},
>  	.num_vregs = 4,
> +	.capabilities = QCA_CAP_WIDEBAND_SPEECH_SUPPORTED,
>  };
>  
> -static const struct qca_vreg_data qca_soc_data_wcn3998 = {
> +static const struct qca_device_data qca_soc_data_wcn3998 = {
>  	.soc_type = QCA_WCN3998,
>  	.vregs = (struct qca_vreg []) {
>  		{ "vddio", 10000  },
> @@ -1724,7 +1729,7 @@ static const struct qca_vreg_data qca_soc_data_wcn3998 = {
>  	.num_vregs = 4,
>  };
>  
> -static const struct qca_vreg_data qca_soc_data_qca6390 = {
> +static const struct qca_device_data qca_soc_data_qca6390 = {
>  	.soc_type = QCA_QCA6390,
>  	.num_vregs = 0,
>  };
> @@ -1860,7 +1865,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>  {
>  	struct qca_serdev *qcadev;
>  	struct hci_dev *hdev;
> -	const struct qca_vreg_data *data;
> +	const struct qca_device_data *data;
>  	int err;
>  	bool power_ctrl_enabled = true;
>  
> @@ -1948,6 +1953,12 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>  		hdev->shutdown = qca_power_off;
>  	}
>  
> +	/* Wideband speech support must be set per driver since it can't be
> +	 * queried via hci.
> +	 */
> +	if (data && (data->capabilities & QCA_CAP_WIDEBAND_SPEECH_SUPPORTED))
> +		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
> +
>  	return 0;
>  }

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

  reply	other threads:[~2020-05-14 21:07 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-14 20:14 [PATCH v2] Bluetooth: hci_qca: Enable WBS support for wcn3991 Abhishek Pandit-Subedi
2020-05-14 21:07 ` Matthias Kaehlcke [this message]
2020-05-18  8:03 ` Marcel Holtmann
2020-05-18 18:12   ` Abhishek Pandit-Subedi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200514210724.GQ4525@google.com \
    --to=mka@chromium.org \
    --cc=abhishekpandit@chromium.org \
    --cc=alainm@chromium.org \
    --cc=bgodavar@codeaurora.org \
    --cc=chromeos-bluetooth-upstreaming@chromium.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.