Re: [PATCH] iio: dac: ad5380: Replace indio_dev->mlock with own device lock

[Jonathan Cameron <jic23@kernel.org>]

On Thu, 14 May 2020 12:13:11 +0300
Sergiu Cuciurean <sergiu.cuciurean@analog.com> wrote:

> As part of the general cleanup of indio_dev->mlock, this change replaces
> it with a local lock on the device's state structure.
> 
> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>

Applied,

Thanks,

Jonathan

> ---
>  drivers/iio/dac/ad5380.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/dac/ad5380.c b/drivers/iio/dac/ad5380.c
> index 2ebe08326048..b37e5675f716 100644
> --- a/drivers/iio/dac/ad5380.c
> +++ b/drivers/iio/dac/ad5380.c
> @@ -51,6 +51,7 @@ struct ad5380_chip_info {
>   * @vref_reg:		vref supply regulator
>   * @vref:		actual reference voltage used in uA
>   * @pwr_down:		whether the chip is currently in power down mode
> + * @lock		lock to protect the data buffer during regmap ops
>   */
>  
>  struct ad5380_state {
> @@ -59,6 +60,7 @@ struct ad5380_state {
>  	struct regulator		*vref_reg;
>  	int				vref;
>  	bool				pwr_down;
> +	struct mutex			lock;
>  };
>  
>  enum ad5380_type {
> @@ -98,7 +100,7 @@ static ssize_t ad5380_write_dac_powerdown(struct iio_dev *indio_dev,
>  	if (ret)
>  		return ret;
>  
> -	mutex_lock(&indio_dev->mlock);
> +	mutex_lock(&st->lock);
>  
>  	if (pwr_down)
>  		ret = regmap_write(st->regmap, AD5380_REG_SF_PWR_DOWN, 0);
> @@ -107,7 +109,7 @@ static ssize_t ad5380_write_dac_powerdown(struct iio_dev *indio_dev,
>  
>  	st->pwr_down = pwr_down;
>  
> -	mutex_unlock(&indio_dev->mlock);
> +	mutex_unlock(&st->lock);
>  
>  	return ret ? ret : len;
>  }
> @@ -390,6 +392,8 @@ static int ad5380_probe(struct device *dev, struct regmap *regmap,
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  	indio_dev->num_channels = st->chip_info->num_channels;
>  
> +	mutex_init(&st->lock);
> +
>  	ret = ad5380_alloc_channels(indio_dev);
>  	if (ret) {
>  		dev_err(dev, "Failed to allocate channel spec: %d\n", ret);