From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Mayank Grover <groverm@codeaurora.org>, linus.walleij@linaro.org
Cc: agross@kernel.org, linux-gpio@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
neeraju@codeaurora.org
Subject: Re: [PATCH] pinctrl: msm: Add check for pinctrl group is valid
Date: Mon, 18 May 2020 18:38:13 -0700 [thread overview]
Message-ID: <20200519013813.GU2165@builder.lan> (raw)
In-Reply-To: <1589817025-21886-1-git-send-email-groverm@codeaurora.org>
On Mon 18 May 08:50 PDT 2020, Mayank Grover wrote:
> The list of reserved gpio pins for platform are populated
> in gpiochip valid_mask.
>
> Here on MSM common driver introduce ability to check if
> pingroup is valid, by parsing pins in pingroup against
> reserved pins for gpios. This does not handle non-gpio
> pingroups.
>
Thanks Mayank, I can confirm that this is a problem, but don't we need
this on some of the pinmux_ops as well?
@Linus, we started off with something similar for GPIOs and ended up
with the logic in the core code. Should we somehow try to do the same
for pinctrl?
Regards,
Bjorn
> Signed-off-by: Mayank Grover <groverm@codeaurora.org>
> ---
> drivers/pinctrl/qcom/pinctrl-msm.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
> index 85858c1..b6ebe26 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> @@ -261,6 +261,24 @@ static unsigned msm_regval_to_drive(u32 val)
> return (val + 1) * 2;
> }
>
> +static bool msm_pingroup_is_valid(struct msm_pinctrl *pctrl,
> + const struct msm_pingroup *g)
> +{
> + const unsigned int *pins = g->pins;
> + unsigned int num_pins = g->npins;
> + struct gpio_chip *chip = &pctrl->chip;
> + unsigned int max_gpios = chip->ngpio;
> + unsigned int i;
> +
> + for (i = 0; i < num_pins; i++) {
> + /* Doesn't handle non-gpio pingroups */
> + if (pins[i] < max_gpios &&
> + !gpiochip_line_is_valid(chip, pins[i]))
> + return false;
> + }
> + return true;
> +}
> +
> static int msm_config_group_get(struct pinctrl_dev *pctldev,
> unsigned int group,
> unsigned long *config)
> @@ -276,6 +294,10 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev,
>
> g = &pctrl->soc->groups[group];
>
> + /* Check if group has all valid pins */
> + if (!msm_pingroup_is_valid(pctrl, g))
> + return -EINVAL;
> +
> ret = msm_config_reg(pctrl, g, param, &mask, &bit);
> if (ret < 0)
> return ret;
> @@ -355,6 +377,10 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev,
>
> g = &pctrl->soc->groups[group];
>
> + /* Check if group has all valid pins */
> + if (!msm_pingroup_is_valid(pctrl, g))
> + return -EINVAL;
> +
> for (i = 0; i < num_configs; i++) {
> param = pinconf_to_config_param(configs[i]);
> arg = pinconf_to_config_argument(configs[i]);
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
> member of the Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2020-05-19 1:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-18 15:50 [PATCH] pinctrl: msm: Add check for pinctrl group is valid Mayank Grover
2020-05-19 1:38 ` Bjorn Andersson [this message]
2020-05-19 11:31 ` Mayank Grover
2020-05-25 9:02 ` Linus Walleij
2020-06-02 12:26 ` Mayank Grover
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200519013813.GU2165@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=groverm@codeaurora.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neeraju@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.