Re: [PATCH v4 00/16] spi: dw: Add generic DW DMA controller support

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Fri, May 22, 2020 at 03:07:49AM +0300, Serge Semin wrote:
> Baikal-T1 SoC provides a DW DMA controller to perform low-speed peripherals
> Mem-to-Dev and Dev-to-Mem transaction. This is also applicable to the DW
> APB SSI devices embedded into the SoC. Currently the DMA-based transfers
> are supported by the DW APB SPI driver only as a middle layer code for
> Intel MID/Elkhart PCI devices. Seeing the same code can be used for normal
> platform DMAC device we introduced a set of patches to fix it within this
> series.
> 
> First of all we need to add the Tx and Rx DMA channels support into the DW
> APB SSI binding. Then there are several fixes and cleanups provided as a
> initial preparation for the Generic DMA support integration: add Tx/Rx
> finish wait methods, clear DMAC register when done or stopped, Fix native
> CS being unset, enable interrupts in accordance with DMA xfer mode,
> discard static DW DMA slave structures, discard unused void priv pointer
> and dma_width member of the dw_spi structure, provide the DMA Tx/Rx burst
> length parametrisation and make sure it's optionally set in accordance
> with the DMA max-burst capability.
> 
> In order to have the DW APB SSI MMIO driver working with DMA we need to
> initialize the paddr field with the physical base address of the DW APB SSI
> registers space. Then we unpin the Intel MID specific code from the
> generic DMA one and placed it into the spi-dw-pci.c driver, which is a
> better place for it anyway. After that the naming cleanups are performed
> since the code is going to be used for a generic DMAC device. Finally the
> Generic DMA initialization can be added to the generic version of the
> DW APB SSI IP.
> 
> Last but not least we traditionally convert the legacy plain text-based
> dt-binding file with yaml-based one and as a cherry on a cake replace
> the manually written DebugFS registers read method with a ready-to-use
> for the same purpose regset32 DebugFS interface usage.
> 
> This patchset is rebased and tested on the spi/for-next (5.7-rc5):
> base-commit: fe9fce6b2cf3 ("Merge remote-tracking branch 'spi/for-5.8' into spi-next")

I have got two bounces because of enormous Cc list in your patches.
I highly recommend to reconsider your approach how you derive Cc lists.

-- 
With Best Regards,
Andy Shevchenko