Re: [PATCH] mfd: sprd: Add wakeup capability for PMIC irq

[Lee Jones <lee.jones@linaro.org>]

On Thu, 07 May 2020, Baolin Wang wrote:

> When changing to use suspend-to-idle to save power, the PMIC irq can not
> wakeup the system due to lack of wakeup capability, which will cause
> the sub-irqs (such as power key) of the PMIC can not wake up the system.
> Thus we can add the wakeup capability for PMIC irq to solve this issue,
> as well as removing the IRQF_NO_SUSPEND flag to allow PMIC irq to be
> a wakeup source.
> 
> Reported-by: Chunyan Zhang <zhang.lyra@gmail.com>
> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
> ---
>  drivers/mfd/sprd-sc27xx-spi.c | 30 +++++++++++++++++++++++++++++-
>  1 file changed, 29 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c
> index ebdf2f1..3064a60 100644
> --- a/drivers/mfd/sprd-sc27xx-spi.c
> +++ b/drivers/mfd/sprd-sc27xx-spi.c
> @@ -256,7 +256,7 @@ static int sprd_pmic_probe(struct spi_device *spi)
>  	}
>  
>  	ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq,
> -				       IRQF_ONESHOT | IRQF_NO_SUSPEND, 0,
> +				       IRQF_ONESHOT, 0,
>  				       &ddata->irq_chip, &ddata->irq_data);
>  	if (ret) {
>  		dev_err(&spi->dev, "Failed to add PMIC irq chip %d\n", ret);
> @@ -272,9 +272,36 @@ static int sprd_pmic_probe(struct spi_device *spi)
>  		return ret;
>  	}
>  
> +	device_init_wakeup(&spi->dev, 1);

This is a bool.  Please use 'true'.

>  	return 0;
>  }
>  
> +#ifdef CONFIG_PM_SLEEP
> +static int sprd_pmic_suspend(struct device *dev)
> +{
> +	struct spi_device *spi = to_spi_device(dev);
> +	struct sprd_pmic *ddata = spi_get_drvdata(spi);

Why don't you just use:

  dev_get_drvdata(dev)

... and skip the superfluous step?

> +	if (device_may_wakeup(dev))
> +		enable_irq_wake(ddata->irq);
> +
> +	return 0;
> +}
> +
> +static int sprd_pmic_resume(struct device *dev)
> +{
> +	struct spi_device *spi = to_spi_device(dev);
> +	struct sprd_pmic *ddata = spi_get_drvdata(spi);

As above.

> +	if (device_may_wakeup(dev))
> +		disable_irq_wake(ddata->irq);
> +
> +	return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(sprd_pmic_pm_ops, sprd_pmic_suspend, sprd_pmic_resume);
> +
>  static const struct of_device_id sprd_pmic_match[] = {
>  	{ .compatible = "sprd,sc2731", .data = &sc2731_data },
>  	{},
> @@ -286,6 +313,7 @@ static int sprd_pmic_probe(struct spi_device *spi)
>  		.name = "sc27xx-pmic",
>  		.bus = &spi_bus_type,
>  		.of_match_table = sprd_pmic_match,
> +		.pm = &sprd_pmic_pm_ops,
>  	},
>  	.probe = sprd_pmic_probe,
>  };

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog