Re: [PATCH 1/2] dt-bindings: rtc: add wakeup-source for FlexTimer

[Alexandre Belloni <alexandre.belloni@bootlin.com>]

On 29/05/2020 14:10:34+0800, Ran Wang wrote:
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
>  Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> index fffac74..d7c482c 100644
> --- a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> +++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> @@ -20,6 +20,7 @@ Required properties:
>  Optional properties:
>  - big-endian: If the host controller is big-endian mode, specify this property.
>    The default endian mode is little-endian.
> +- wakeup-source: Enable it as a wakeup source
>  

This is already covered by Documentation/devicetree/bindings/rtc/rtc.yaml

>  Example:
>  rcpm: rcpm@1e34040 {
> @@ -32,5 +33,6 @@ ftm_alarm0: timer@2800000 {
>  	compatible = "fsl,ls1088a-ftm-alarm";
>  	reg = <0x0 0x2800000 0x0 0x10000>;
>  	fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
> +	wakeup-source;
>  	interrupts = <0 44 4>;
>  };
> -- 
> 2.7.4
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com