From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Sasha Levin <sashal@kernel.org>,
linux- stable <stable@vger.kernel.org>,
lkft-triage@lists.linaro.org, rmk+kernel@armlinux.org.uk
Subject: Re: stable-rc 4.9: arm: arch/arm/vfp/vfphw.S:158: Error: bad instruction `ldcleq p11,cr0,[r10],#32*4'
Date: Mon, 1 Jun 2020 19:02:48 +0200 [thread overview]
Message-ID: <20200601170248.GA1105493@kroah.com> (raw)
In-Reply-To: <CA+G9fYuwMbm2NUmSLohbUs+KzKcyY9rC0dc4kh9AD9hJi6+ePw@mail.gmail.com>
On Mon, Jun 01, 2020 at 09:18:34PM +0530, Naresh Kamboju wrote:
> stable-rc 4.9 arm architecture build failed due to
> following errors,
>
> # make -sk KBUILD_BUILD_USER=TuxBuild -C/linux -j16 ARCH=arm
> CROSS_COMPILE=arm-linux-gnueabihf- HOSTCC=gcc CC="sccache
> arm-linux-gnueabihf-gcc" O=build zImage
> #
> ../arch/arm/vfp/vfphw.S: Assembler messages:
> ../arch/arm/vfp/vfphw.S:158: Error: bad instruction `ldcleq p11,cr0,[r10],#32*4'
> ../arch/arm/vfp/vfphw.S:233: Error: bad instruction `stcleq p11,cr0,[r0],#32*4'
> make[2]: *** [../scripts/Makefile.build:404: arch/arm/vfp/vfphw.o] Error 1
> make[2]: Target '__build' not remade because of errors.
> make[1]: *** [/linux/Makefile:1040: arch/arm/vfp] Error 2
> ../arch/arm/lib/changebit.S: Assembler messages:
> ../arch/arm/lib/changebit.S:15: Error: bad instruction `strbne r1,[ip]'
> make[2]: *** [../scripts/Makefile.build:404: arch/arm/lib/changebit.o] Error 1
> ../arch/arm/lib/clear_user.S: Assembler messages:
> ../arch/arm/lib/clear_user.S:33: Error: bad instruction `strbal r2,[r0],#1'
> ../arch/arm/lib/clear_user.S:34: Error: bad instruction `strble r2,[r0],#1'
> ../arch/arm/lib/clear_user.S:35: Error: bad instruction `strblt r2,[r0],#1'
> ../arch/arm/lib/clear_user.S:44: Error: bad instruction `strbne r2,[r0],#1'
> ../arch/arm/lib/clear_user.S:44: Error: bad instruction `strbne r2,[r0],#1'
> make[2]: *** [../scripts/Makefile.build:404: arch/arm/lib/clear_user.o] Error 1
> ../arch/arm/lib/clearbit.S: Assembler messages:
> ../arch/arm/lib/clearbit.S:15: Error: bad instruction `strbne r1,[ip]'
> make[2]: *** [../scripts/Makefile.build:404: arch/arm/lib/clearbit.o] Error 1
> ../arch/arm/lib/copy_from_user.S: Assembler messages:
> ../arch/arm/lib/copy_from_user.S:96: Error: bad instruction `subshs ip,ip,r2'
> ../arch/arm/lib/copy_template.S:168: Error: bad instruction `ldrbne r3,[r1],#1'
> ../arch/arm/lib/copy_template.S:169: Error: bad instruction `ldrbcs r4,[r1],#1'
> ../arch/arm/lib/copy_template.S:170: Error: bad instruction `ldrbcs ip,[r1],#1'
> ../arch/arm/lib/copy_template.S:179: Error: bad instruction `ldrbgt r3,[r1],#1'
> ../arch/arm/lib/copy_template.S:180: Error: bad instruction `ldrbge r4,[r1],#1'
> ../arch/arm/lib/copy_template.S:181: Error: bad instruction `ldrbal lr,[r1],#1'
> make[2]: *** [../scripts/Makefile.build:404:
> arch/arm/lib/copy_from_user.o] Error 1
> ../arch/arm/lib/copy_to_user.S: Assembler messages:
> ../arch/arm/lib/copy_to_user.S:100: Error: bad instruction `subshs ip,ip,r2'
> ../arch/arm/lib/copy_template.S:171: Error: bad instruction `strbne r3,[r0],#1'
> ../arch/arm/lib/copy_template.S:172: Error: bad instruction `strbcs r4,[r0],#1'
> ../arch/arm/lib/copy_template.S:173: Error: bad instruction `strbcs ip,[r0],#1'
> ../arch/arm/lib/copy_template.S:182: Error: bad instruction `strbgt r3,[r0],#1'
> ../arch/arm/lib/copy_template.S:183: Error: bad instruction `strbge r4,[r0],#1'
> ../arch/arm/lib/copy_template.S:185: Error: bad instruction `strbal lr,[r0],#1'
> make[2]: *** [../scripts/Makefile.build:404:
> arch/arm/lib/copy_to_user.o] Error 1
> ../arch/arm/lib/csumpartialcopygeneric.S: Assembler messages:
> ../arch/arm/lib/csumpartialcopygeneric.S:39: Error: bad instruction
> `ldrbal ip,[r0],#1'
> ../arch/arm/lib/csumpartialcopygeneric.S:46: Error: bad instruction
> `ldrbal r8,[r0],#1'
> ../arch/arm/lib/csumpartialcopygeneric.S:46: Error: bad instruction
> `ldrbal ip,[r0],#1'
> ../arch/arm/lib/csumpartialcopygeneric.S:66: Error: bad instruction
> `ldrbal ip,[r0],#1'
> ../arch/arm/lib/csumpartialcopygeneric.S:73: Error: bad instruction
> `ldrbal r8,[r0],#1'
> ../arch/arm/lib/csumpartialcopygeneric.S:73: Error: bad instruction
> `ldrbal ip,[r0],#1'
> ../arch/arm/lib/csumpartialcopygeneric.S:85: Error: bad instruction
> `ldrbal r8,[r0],#1'
> ../arch/arm/lib/csumpartialcopygeneric.S:277: Error: bad instruction
> `ldrbal r5,[r0],#1'
> make[2]: *** [../scripts/Makefile.build:404:
> arch/arm/lib/csumpartialcopyuser.o] Error 1
> ../arch/arm/lib/getuser.S: Assembler messages:
> ../arch/arm/lib/getuser.S:36: Error: bad instruction `sbcscc r2,r2,r1'
> ../arch/arm/lib/getuser.S:44: Error: bad instruction `sbcscc r2,r2,r1'
> ../arch/arm/lib/getuser.S:74: Error: bad instruction `sbcscc r2,r2,r1'
> ../arch/arm/lib/getuser.S:82: Error: bad instruction `sbcscc r2,r2,r1'
> make[2]: *** [../scripts/Makefile.build:404: arch/arm/lib/getuser.o] Error 1
> ../arch/arm/lib/putuser.S: Assembler messages:
> ../arch/arm/lib/putuser.S:36: Error: bad instruction `sbcscc ip,ip,r1'
> ../arch/arm/lib/putuser.S:43: Error: bad instruction `sbcscc ip,ip,r1'
> ../arch/arm/lib/putuser.S:65: Error: bad instruction `sbcscc ip,ip,r1'
> ../arch/arm/lib/putuser.S:72: Error: bad instruction `sbcscc ip,ip,r1'
> make[2]: *** [../scripts/Makefile.build:404: arch/arm/lib/putuser.o] Error 1
> ../arch/arm/lib/setbit.S: Assembler messages:
> ../arch/arm/lib/setbit.S:15: Error: bad instruction `strbne r1,[ip]'
> make[2]: *** [../scripts/Makefile.build:404: arch/arm/lib/setbit.o] Error 1
> ../arch/arm/lib/testchangebit.S: Assembler messages:
> ../arch/arm/lib/testchangebit.S:15: Error: bad instruction `strbne r1,[ip]'
> make[2]: *** [../scripts/Makefile.build:404:
> arch/arm/lib/testchangebit.o] Error 1
> ../arch/arm/lib/testclearbit.S: Assembler messages:
> ../arch/arm/lib/testclearbit.S:15: Error: bad instruction `strbne r1,[ip]'
> make[2]: *** [../scripts/Makefile.build:404:
> arch/arm/lib/testclearbit.o] Error 1
> ../arch/arm/lib/testsetbit.S: Assembler messages:
> ../arch/arm/lib/testsetbit.S:15: Error: bad instruction `strbne r1,[ip]'
> make[2]: *** [../scripts/Makefile.build:404: arch/arm/lib/testsetbit.o] Error 1
> make[2]: Target '__build' not remade because of errors.
> make[1]: *** [/linux/Makefile:1040: arch/arm/lib] Error 2
> make[1]: Target 'zImage' not remade because of errors.
> make: *** [Makefile:152: sub-make] Error 2
> make: Target 'zImage' not remade because of errors.
Caused by c001899a5d6c ("ARM: 8843/1: use unified assembler in headers")
Odd, I'll drop it from 4.9, but it's also in the 4.14 and 4.19 queues as
well, is it causing issues there too?
thanks,
greg k-h
next prev parent reply other threads:[~2020-06-01 17:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-01 15:48 stable-rc 4.9: arm: arch/arm/vfp/vfphw.S:158: Error: bad instruction `ldcleq p11,cr0,[r10],#32*4' Naresh Kamboju
2020-06-01 17:02 ` Greg Kroah-Hartman [this message]
2020-06-01 17:07 ` Russell King - ARM Linux admin
2020-06-01 17:21 ` Greg Kroah-Hartman
2020-06-01 17:35 ` Greg Kroah-Hartman
2020-06-01 17:38 ` Naresh Kamboju
2020-06-01 17:31 ` Naresh Kamboju
2020-06-01 18:26 ` Sasha Levin
2020-06-01 18:33 ` Naresh Kamboju
2020-06-01 18:29 ` Russell King - ARM Linux admin
2020-06-01 19:45 ` Naresh Kamboju
2020-06-01 20:37 ` Russell King - ARM Linux admin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200601170248.GA1105493@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=lkft-triage@lists.linaro.org \
--cc=naresh.kamboju@linaro.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.