All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luo bin <luobin9@huawei.com>
To: <davem@davemloft.net>
Cc: <linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>,
	<luoxianjun@huawei.com>, <chiqijun@huawei.com>,
	<yin.yinshi@huawei.com>, <cloud.wangxiaoyun@huawei.com>
Subject: [PATCH net-next 4/5] hinic: add support to identify physical device
Date: Wed, 3 Jun 2020 14:20:14 +0800	[thread overview]
Message-ID: <20200603062015.12640-5-luobin9@huawei.com> (raw)
In-Reply-To: <20200603062015.12640-1-luobin9@huawei.com>

add support to identify physical device by flashing an LED
attached to it with ethtool -p cmd.

Signed-off-by: Luo bin <luobin9@huawei.com>
---
 .../net/ethernet/huawei/hinic/hinic_ethtool.c | 41 ++++++++++++++
 .../net/ethernet/huawei/hinic/hinic_hw_dev.c  |  2 +
 .../net/ethernet/huawei/hinic/hinic_hw_dev.h  |  1 +
 .../net/ethernet/huawei/hinic/hinic_hw_mgmt.h |  4 +-
 .../net/ethernet/huawei/hinic/hinic_port.c    | 55 +++++++++++++++++++
 .../net/ethernet/huawei/hinic/hinic_port.h    | 35 ++++++++++++
 .../net/ethernet/huawei/hinic/hinic_sriov.c   |  4 +-
 7 files changed, 139 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c b/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c
index 5d6278cf74ad..61a5c59532b8 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c
@@ -1759,6 +1759,46 @@ static void hinic_diag_test(struct net_device *netdev,
 		netif_carrier_on(netdev);
 }
 
+static int hinic_set_phys_id(struct net_device *netdev,
+			     enum ethtool_phys_id_state state)
+{
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	int err = 0;
+	u8 port;
+
+	port = nic_dev->hwdev->port_id;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		err = hinic_set_led_status(nic_dev->hwdev, port,
+					   HINIC_LED_TYPE_LINK,
+					   HINIC_LED_MODE_FORCE_2HZ);
+		if (err)
+			netif_err(nic_dev, drv, netdev,
+				  "Set LED blinking in 2HZ failed\n");
+		else
+			netif_info(nic_dev, drv, netdev,
+				   "Set LED blinking in 2HZ success\n");
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		err = hinic_reset_led_status(nic_dev->hwdev, port);
+		if (err)
+			netif_err(nic_dev, drv, netdev,
+				  "Reset LED to original status failed\n");
+		else
+			netif_info(nic_dev, drv, netdev,
+				   "Reset LED to original status success\n");
+
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return err;
+}
+
 static const struct ethtool_ops hinic_ethtool_ops = {
 	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS |
 				     ETHTOOL_COALESCE_RX_MAX_FRAMES |
@@ -1789,6 +1829,7 @@ static const struct ethtool_ops hinic_ethtool_ops = {
 	.get_ethtool_stats = hinic_get_ethtool_stats,
 	.get_strings = hinic_get_strings,
 	.self_test = hinic_diag_test,
+	.set_phys_id = hinic_set_phys_id,
 };
 
 static const struct ethtool_ops hinicvf_ethtool_ops = {
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
index 4de50e4ba4df..45c137827a16 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
@@ -83,6 +83,8 @@ static int parse_capability(struct hinic_hwdev *hwdev,
 		nic_cap->max_vf_qps = dev_cap->max_vf_sqs + 1;
 	}
 
+	hwdev->port_id = dev_cap->port_id;
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
index c92c39a50b81..01fe94f2d4bc 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
@@ -312,6 +312,7 @@ struct hinic_hwdev {
 	struct hinic_mbox_func_to_func  *func_to_func;
 
 	struct hinic_cap                nic_cap;
+	u8				port_id;
 };
 
 struct hinic_nic_cb {
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h
index a3349ae30ff3..919d2c6ffc35 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h
@@ -81,7 +81,9 @@ enum hinic_comm_cmd {
 	HINIC_COMM_CMD_MSI_CTRL_REG_WR_BY_UP,
 	HINIC_COMM_CMD_MSI_CTRL_REG_RD_BY_UP,
 
-	HINIC_COMM_CMD_L2NIC_RESET		= 0x4b,
+	HINIC_COMM_CMD_SET_LED_STATUS	= 0x4a,
+
+	HINIC_COMM_CMD_L2NIC_RESET	= 0x4b,
 
 	HINIC_COMM_CMD_PAGESIZE_SET	= 0x50,
 
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_port.c b/drivers/net/ethernet/huawei/hinic/hinic_port.c
index 53ea2740ba9f..fc99d9f6799a 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_port.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_port.c
@@ -1271,3 +1271,58 @@ int hinic_set_loopback_mode(struct hinic_hwdev *hwdev, u32 mode, u32 enable)
 
 	return 0;
 }
+
+static int _set_led_status(struct hinic_hwdev *hwdev, u8 port,
+			   enum hinic_led_type type,
+			   enum hinic_led_mode mode, u8 reset)
+{
+	struct hinic_led_info led_info = {0};
+	u16 out_size = sizeof(led_info);
+	struct hinic_pfhwdev *pfhwdev;
+	int err;
+
+	pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
+
+	led_info.port = port;
+	led_info.reset = reset;
+
+	led_info.type = type;
+	led_info.mode = mode;
+
+	err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM,
+				HINIC_COMM_CMD_SET_LED_STATUS,
+				&led_info, sizeof(led_info),
+				&led_info, &out_size, HINIC_MGMT_MSG_SYNC);
+	if (err || led_info.status || !out_size) {
+		dev_err(&hwdev->hwif->pdev->dev, "Failed to set led status, err: %d, status: 0x%x, out size: 0x%x\n",
+			err, led_info.status, out_size);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+int hinic_set_led_status(struct hinic_hwdev *hwdev, u8 port,
+			 enum hinic_led_type type, enum hinic_led_mode mode)
+{
+	if (!hwdev)
+		return -EINVAL;
+
+	return _set_led_status(hwdev, port, type, mode, 0);
+}
+
+int hinic_reset_led_status(struct hinic_hwdev *hwdev, u8 port)
+{
+	int err;
+
+	if (!hwdev)
+		return -EINVAL;
+
+	err = _set_led_status(hwdev, port, HINIC_LED_TYPE_INVALID,
+			      HINIC_LED_MODE_INVALID, 1);
+	if (err)
+		dev_err(&hwdev->hwif->pdev->dev,
+			"Failed to reset led status\n");
+
+	return err;
+}
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_port.h b/drivers/net/ethernet/huawei/hinic/hinic_port.h
index b21956d7232e..5c916875f295 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_port.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_port.h
@@ -666,6 +666,17 @@ struct hinic_port_loopback {
 	u32	en;
 };
 
+struct hinic_led_info {
+	u8	status;
+	u8	version;
+	u8	rsvd0[6];
+
+	u8	port;
+	u8	type;
+	u8	mode;
+	u8	reset;
+};
+
 int hinic_port_add_mac(struct hinic_dev *nic_dev, const u8 *addr,
 		       u16 vlan_id);
 
@@ -765,6 +776,30 @@ int hinic_dcb_set_pfc(struct hinic_hwdev *hwdev, u8 pfc_en, u8 pfc_bitmap);
 
 int hinic_set_loopback_mode(struct hinic_hwdev *hwdev, u32 mode, u32 enable);
 
+enum hinic_led_mode {
+	HINIC_LED_MODE_ON,
+	HINIC_LED_MODE_OFF,
+	HINIC_LED_MODE_FORCE_1HZ,
+	HINIC_LED_MODE_FORCE_2HZ,
+	HINIC_LED_MODE_FORCE_4HZ,
+	HINIC_LED_MODE_1HZ,
+	HINIC_LED_MODE_2HZ,
+	HINIC_LED_MODE_4HZ,
+	HINIC_LED_MODE_INVALID,
+};
+
+enum hinic_led_type {
+	HINIC_LED_TYPE_LINK,
+	HINIC_LED_TYPE_LOW_SPEED,
+	HINIC_LED_TYPE_HIGH_SPEED,
+	HINIC_LED_TYPE_INVALID,
+};
+
+int hinic_reset_led_status(struct hinic_hwdev *hwdev, u8 port);
+
+int hinic_set_led_status(struct hinic_hwdev *hwdev, u8 port,
+			 enum hinic_led_type type, enum hinic_led_mode mode);
+
 int hinic_open(struct net_device *netdev);
 
 int hinic_close(struct net_device *netdev);
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
index efab2dd2c889..f5c7c1f48542 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
@@ -383,7 +383,7 @@ static int hinic_del_vf_mac_msg_handler(void *hwdev, u16 vf_id,
 
 	nic_io = &hw_dev->func_to_io;
 	vf_info = nic_io->vf_infos + HW_VF_ID_TO_OS(vf_id);
-	if (vf_info->pf_set_mac  && is_valid_ether_addr(mac_in->mac) &&
+	if (vf_info->pf_set_mac && is_valid_ether_addr(mac_in->mac) &&
 	    !memcmp(vf_info->vf_mac_addr, mac_in->mac, ETH_ALEN)) {
 		dev_warn(&hw_dev->hwif->pdev->dev, "PF has already set VF mac.\n");
 		mac_out->status = HINIC_PF_SET_VF_ALREADY;
@@ -905,7 +905,6 @@ int hinic_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
 
 	err = hinic_set_vf_spoofchk(sriov_info->hwdev,
 				    OS_VF_ID_TO_HW(vf), setting);
-
 	if (!err) {
 		netif_info(nic_dev, drv, netdev, "Set VF %d spoofchk %s successfully\n",
 			   vf, setting ? "on" : "off");
@@ -1020,6 +1019,7 @@ static int cfg_mbx_pf_proc_vf_msg(void *hwdev, u16 vf_id, u8 cmd, void *buf_in,
 	dev_cap->max_vf = cap->max_vf;
 	dev_cap->max_sqs = cap->max_vf_qps;
 	dev_cap->max_rqs = cap->max_vf_qps;
+	dev_cap->port_id = dev->port_id;
 
 	*out_size = sizeof(*dev_cap);
 
-- 
2.17.1


  parent reply	other threads:[~2020-06-03  6:22 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-03  6:20 [PATCH net-next 0/5] hinic: add some ethtool ops support Luo bin
2020-06-03  6:20 ` [PATCH net-next 1/5] hinic: add support to set and get pause params Luo bin
2020-06-03  6:20 ` [PATCH net-next 2/5] hinic: add support to set and get irq coalesce Luo bin
2020-06-03  6:20 ` [PATCH net-next 3/5] hinic: add self test support Luo bin
2020-06-03  6:20 ` Luo bin [this message]
2020-06-03  6:20 ` [PATCH net-next 5/5] hinic: add support to get eeprom information Luo bin
2020-06-04  3:01   ` Jakub Kicinski
2020-06-04  3:08     ` luobin (L)
2020-06-03 17:41 ` [PATCH net-next 0/5] hinic: add some ethtool ops support David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200603062015.12640-5-luobin9@huawei.com \
    --to=luobin9@huawei.com \
    --cc=chiqijun@huawei.com \
    --cc=cloud.wangxiaoyun@huawei.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luoxianjun@huawei.com \
    --cc=netdev@vger.kernel.org \
    --cc=yin.yinshi@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.