Re: [PATCH v7 0/8] pci_expander_brdige:acpi: Support pxb-pcie for ARM

["Michael S. Tsirkin" <mst@redhat.com>]

On Wed, May 20, 2020 at 05:36:21PM +0800, Yubo Miao wrote:
> Changes with v6
> v6->v7:
> Refactor fw_cfg_write_extra_pci_roots
> Add API PCI_GET_PCIE_HOST_STATE
> Fix typos
> 
> I have one question for patch
> [PATCH v7 8/8] unit-test: Add the binary file and clear diff.
> 
> I followed instructions in tests/qtest/bios-tables-test.c
> to updated golden master binaries and empty
> tests/qtest/bios-tables-test-allowed-diff.h.
> 
> However, checkpatch.pl would report the error
> ERROR: Do not add expected files together with tests.
> 
> Does the error matters?

It doesn't - should be fixed on master.
But I see other checkpatch errors.
Can you address them and repost pls?

> Changes with v5
> v5->v6: stat crs_range_insert in aml_build.h
> 
> Changes with v4
> v4->v5: Not using specific resources for PXB.
> Instead, the resources for pxb are composed of the bar space of the
> pci-bridge/pcie-root-port behined it and the config space of devices
> behind it.
> 
> Only if the bios(uefi for arm) support multiple roots,
> configure space of devices behind pxbs could be obtained.
> The uefi work is updated for discussion by the following link:
> https://edk2.groups.io/g/devel/message/56901?p=,,,20,0,0,0::Created,,add+extra+roots+for+Arm,20,2,0,72723351
> [PATCH] ArmVirtPkg/FdtPciHostBridgeLib: add extra roots for Arm.
> 
> Currently pxb-pcie is not supported by arm,
> the reason for it is pxb-pcie is not described in DSDT table
> and only one main host bridge is described in acpi tables,
> which means it is not impossible to present different io numas
> for different devices.
> 
> This series of patches make arm to support PXB-PCIE.
> 
> Users can configure pxb-pcie with certain numa, Example command
> is:
> 
>    -device pxb-pcie,id=pci.7,bus_nr=128,numa_node=0,bus=pcie.0,addr=0x9
> 
> Yubo Miao (8):
>   acpi: Extract two APIs from acpi_dsdt_add_pci
>   fw_cfg: Write the extra roots into the fw_cfg
>   acpi: Extract crs build form acpi_build.c
>   acpi: Refactor the source of host bridge and build tables for pxb
>   acpi: Align the size to 128k
>   unit-test: The files changed.
>   unit-test: Add testcase for pxb
>   unit-test: Add the binary file and clear diff.h
> 
>  hw/acpi/aml-build.c            | 275 +++++++++++++++++++++++++++++++
>  hw/arm/virt-acpi-build.c       | 249 +++++++++++++++++++++-------
>  hw/arm/virt.c                  |   8 +
>  hw/i386/acpi-build.c           | 285 ---------------------------------
>  hw/i386/pc.c                   |  18 +--
>  hw/nvram/fw_cfg.c              |  20 +++
>  include/hw/acpi/aml-build.h    |  25 +++
>  include/hw/nvram/fw_cfg.h      |   2 +
>  include/hw/pci/pcie_host.h     |   4 +
>  tests/data/acpi/virt/DSDT.pxb  | Bin 0 -> 7802 bytes
>  tests/qtest/bios-tables-test.c |  58 ++++++-
>  11 files changed, 579 insertions(+), 365 deletions(-)
>  create mode 100644 tests/data/acpi/virt/DSDT.pxb
> 
> -- 
> 2.19.1
>