From: Klaus Jensen <its@irrelevant.dk>
To: qemu-block@nongnu.org
Cc: "Kevin Wolf" <kwolf@redhat.com>,
"Klaus Jensen" <k.jensen@samsung.com>,
qemu-devel@nongnu.org, "Max Reitz" <mreitz@redhat.com>,
"Klaus Jensen" <its@irrelevant.dk>,
"Keith Busch" <kbusch@kernel.org>,
"Javier Gonzalez" <javier.gonz@samsung.com>,
"Maxim Levitsky" <mlevitsk@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [PATCH v7 08/22] hw/block/nvme: add max_ioqpairs device parameter
Date: Tue, 9 Jun 2020 21:03:19 +0200 [thread overview]
Message-ID: <20200609190333.59390-9-its@irrelevant.dk> (raw)
In-Reply-To: <20200609190333.59390-1-its@irrelevant.dk>
From: Klaus Jensen <k.jensen@samsung.com>
The num_queues device paramater has a slightly confusing meaning because
it accounts for the admin queue pair which is not really optional.
Secondly, it is really a maximum value of queues allowed.
Add a new max_ioqpairs parameter that only accounts for I/O queue pairs,
but keep num_queues for compatibility.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200514044611.734782-10-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 51 ++++++++++++++++++++++++++++++-------------------
hw/block/nvme.h | 3 ++-
2 files changed, 33 insertions(+), 21 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index ee514625ee85..1c1d2f8b7768 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -20,7 +20,7 @@
* -device nvme,drive=<drive_id>,serial=<serial>,id=<id[optional]>, \
* cmb_size_mb=<cmb_size_mb[optional]>, \
* [pmrdev=<mem_backend_file_id>,] \
- * num_queues=<N[optional]>
+ * max_ioqpairs=<N[optional]>
*
* Note cmb_size_mb denotes size of CMB in MB. CMB is assumed to be at
* offset 0 in BAR2 and supports only WDS, RDS and SQS for now.
@@ -36,6 +36,7 @@
#include "qemu/osdep.h"
#include "qemu/units.h"
+#include "qemu/error-report.h"
#include "hw/block/block.h"
#include "hw/pci/msix.h"
#include "hw/pci/pci.h"
@@ -85,12 +86,12 @@ static void nvme_addr_read(NvmeCtrl *n, hwaddr addr, void *buf, int size)
static int nvme_check_sqid(NvmeCtrl *n, uint16_t sqid)
{
- return sqid < n->params.num_queues && n->sq[sqid] != NULL ? 0 : -1;
+ return sqid < n->params.max_ioqpairs + 1 && n->sq[sqid] != NULL ? 0 : -1;
}
static int nvme_check_cqid(NvmeCtrl *n, uint16_t cqid)
{
- return cqid < n->params.num_queues && n->cq[cqid] != NULL ? 0 : -1;
+ return cqid < n->params.max_ioqpairs + 1 && n->cq[cqid] != NULL ? 0 : -1;
}
static void nvme_inc_cq_tail(NvmeCQueue *cq)
@@ -656,7 +657,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeCmd *cmd)
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
- if (unlikely(vector > n->params.num_queues)) {
+ if (unlikely(vector > n->params.max_ioqpairs)) {
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
@@ -808,8 +809,8 @@ static uint16_t nvme_get_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
trace_pci_nvme_getfeat_vwcache(result ? "enabled" : "disabled");
break;
case NVME_NUMBER_OF_QUEUES:
- result = cpu_to_le32((n->params.num_queues - 2) |
- ((n->params.num_queues - 2) << 16));
+ result = cpu_to_le32((n->params.max_ioqpairs - 1) |
+ ((n->params.max_ioqpairs - 1) << 16));
trace_pci_nvme_getfeat_numq(result);
break;
case NVME_TIMESTAMP:
@@ -853,10 +854,10 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
case NVME_NUMBER_OF_QUEUES:
trace_pci_nvme_setfeat_numq((dw11 & 0xFFFF) + 1,
((dw11 >> 16) & 0xFFFF) + 1,
- n->params.num_queues - 1,
- n->params.num_queues - 1);
- req->cqe.result = cpu_to_le32((n->params.num_queues - 2) |
- ((n->params.num_queues - 2) << 16));
+ n->params.max_ioqpairs,
+ n->params.max_ioqpairs);
+ req->cqe.result = cpu_to_le32((n->params.max_ioqpairs - 1) |
+ ((n->params.max_ioqpairs - 1) << 16));
break;
case NVME_TIMESTAMP:
return nvme_set_feature_timestamp(n, cmd);
@@ -927,12 +928,12 @@ static void nvme_clear_ctrl(NvmeCtrl *n)
blk_drain(n->conf.blk);
- for (i = 0; i < n->params.num_queues; i++) {
+ for (i = 0; i < n->params.max_ioqpairs + 1; i++) {
if (n->sq[i] != NULL) {
nvme_free_sq(n->sq[i], n);
}
}
- for (i = 0; i < n->params.num_queues; i++) {
+ for (i = 0; i < n->params.max_ioqpairs + 1; i++) {
if (n->cq[i] != NULL) {
nvme_free_cq(n->cq[i], n);
}
@@ -1362,8 +1363,17 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
int64_t bs_size;
uint8_t *pci_conf;
- if (!n->params.num_queues) {
- error_setg(errp, "num_queues can't be zero");
+ if (n->params.num_queues) {
+ warn_report("num_queues is deprecated; please use max_ioqpairs "
+ "instead");
+
+ n->params.max_ioqpairs = n->params.num_queues - 1;
+ }
+
+ if (n->params.max_ioqpairs < 1 ||
+ n->params.max_ioqpairs > PCI_MSIX_FLAGS_QSIZE) {
+ error_setg(errp, "max_ioqpairs must be between 1 and %d",
+ PCI_MSIX_FLAGS_QSIZE);
return;
}
@@ -1413,21 +1423,21 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
n->num_namespaces = 1;
- /* num_queues is really number of pairs, so each has two doorbells */
+ /* add one to max_ioqpairs to account for the admin queue pair */
n->reg_size = pow2ceil(NVME_REG_SIZE +
- 2 * n->params.num_queues * NVME_DB_SIZE);
+ 2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE);
n->ns_size = bs_size / (uint64_t)n->num_namespaces;
n->namespaces = g_new0(NvmeNamespace, n->num_namespaces);
- n->sq = g_new0(NvmeSQueue *, n->params.num_queues);
- n->cq = g_new0(NvmeCQueue *, n->params.num_queues);
+ n->sq = g_new0(NvmeSQueue *, n->params.max_ioqpairs + 1);
+ n->cq = g_new0(NvmeCQueue *, n->params.max_ioqpairs + 1);
memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
"nvme", n->reg_size);
pci_register_bar(pci_dev, 0,
PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64,
&n->iomem);
- msix_init_exclusive_bar(pci_dev, n->params.num_queues, 4, NULL);
+ msix_init_exclusive_bar(pci_dev, n->params.max_ioqpairs + 1, 4, NULL);
id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
id->ssvid = cpu_to_le16(pci_get_word(pci_conf + PCI_SUBSYSTEM_VENDOR_ID));
@@ -1573,7 +1583,8 @@ static Property nvme_props[] = {
HostMemoryBackend *),
DEFINE_PROP_STRING("serial", NvmeCtrl, params.serial),
DEFINE_PROP_UINT32("cmb_size_mb", NvmeCtrl, params.cmb_size_mb, 0),
- DEFINE_PROP_UINT32("num_queues", NvmeCtrl, params.num_queues, 64),
+ DEFINE_PROP_UINT32("num_queues", NvmeCtrl, params.num_queues, 0),
+ DEFINE_PROP_UINT32("max_ioqpairs", NvmeCtrl, params.max_ioqpairs, 64),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/hw/block/nvme.h b/hw/block/nvme.h
index 91f16c812582..26c38bd913be 100644
--- a/hw/block/nvme.h
+++ b/hw/block/nvme.h
@@ -5,7 +5,8 @@
typedef struct NvmeParams {
char *serial;
- uint32_t num_queues;
+ uint32_t num_queues; /* deprecated since 5.1 */
+ uint32_t max_ioqpairs;
uint32_t cmb_size_mb;
} NvmeParams;
--
2.27.0
next prev parent reply other threads:[~2020-06-09 19:06 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-09 19:03 [PATCH v7 00/22] nvme: small fixes, refactoring and cleanups Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 01/22] hw/block/nvme: fix pci doorbell size calculation Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 02/22] hw/block/nvme: rename trace events to pci_nvme Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 03/22] hw/block/nvme: remove superfluous breaks Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 04/22] hw/block/nvme: move device parameters to separate struct Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 05/22] hw/block/nvme: use constants in identify Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 06/22] hw/block/nvme: refactor nvme_addr_read Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 07/22] hw/block/nvme: fix pin-based interrupt behavior Klaus Jensen
2020-06-09 19:03 ` Klaus Jensen [this message]
2020-06-09 19:03 ` [PATCH v7 09/22] hw/block/nvme: remove redundant cmbloc/cmbsz members Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 10/22] hw/block/nvme: factor out property/constraint checks Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 11/22] hw/block/nvme: factor out device state setup Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 12/22] hw/block/nvme: factor out block backend setup Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 13/22] hw/block/nvme: add namespace helpers Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 14/22] hw/block/nvme: factor out namespace setup Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 15/22] hw/block/nvme: factor out pci setup Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 16/22] hw/block/nvme: factor out cmb setup Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 17/22] hw/block/nvme: factor out pmr setup Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 18/22] hw/block/nvme: do cmb/pmr init as part of pci init Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 19/22] hw/block/nvme: factor out controller identify setup Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 20/22] hw/block/nvme: Verify msix_vector_use() returned value Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 21/22] hw/block/nvme: add msix_qsize parameter Klaus Jensen
2020-06-09 19:03 ` [PATCH v7 22/22] hw/block/nvme: verify msix_init_exclusive_bar() return value Klaus Jensen
2020-06-15 16:21 ` [PATCH v7 00/22] nvme: small fixes, refactoring and cleanups Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200609190333.59390-9-its@irrelevant.dk \
--to=its@irrelevant.dk \
--cc=javier.gonz@samsung.com \
--cc=k.jensen@samsung.com \
--cc=kbusch@kernel.org \
--cc=kwolf@redhat.com \
--cc=mlevitsk@redhat.com \
--cc=mreitz@redhat.com \
--cc=philmd@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.