From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 09/10] powerpc: Remove T4160QDS_NAND_defconfig board
Date: Sat, 13 Jun 2020 17:51:07 +0530 [thread overview]
Message-ID: <20200613122108.87686-10-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20200613122108.87686-1-jagan@amarulasolutions.com>
DM_SPI and other driver model migration deadlines
are expired for this board.
Remove it.
Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
arch/powerpc/cpu/mpc85xx/Kconfig | 20 -
board/freescale/t4qds/Kconfig | 14 -
board/freescale/t4qds/MAINTAINERS | 18 -
board/freescale/t4qds/Makefile | 15 -
board/freescale/t4qds/README | 194 -----
board/freescale/t4qds/ddr.c | 134 ----
board/freescale/t4qds/ddr.h | 81 --
board/freescale/t4qds/eth.c | 869 --------------------
board/freescale/t4qds/law.c | 33 -
board/freescale/t4qds/pci.c | 23 -
board/freescale/t4qds/spl.c | 145 ----
board/freescale/t4qds/t4240emu.c | 85 --
board/freescale/t4qds/t4240qds.c | 929 ----------------------
board/freescale/t4qds/t4240qds_qixis.h | 42 -
board/freescale/t4qds/t4_nand_rcw.cfg | 7 -
board/freescale/t4qds/t4_pbi.cfg | 21 -
board/freescale/t4qds/t4_sd_rcw.cfg | 7 -
board/freescale/t4qds/t4qds.h | 12 -
board/freescale/t4qds/tlb.c | 146 ----
configs/T4160QDS_NAND_defconfig | 69 --
configs/T4160QDS_SDCARD_defconfig | 66 --
configs/T4160QDS_SECURE_BOOT_defconfig | 56 --
configs/T4160QDS_defconfig | 53 --
configs/T4240QDS_NAND_defconfig | 69 --
configs/T4240QDS_SDCARD_defconfig | 66 --
configs/T4240QDS_SECURE_BOOT_defconfig | 56 --
configs/T4240QDS_SRIO_PCIE_BOOT_defconfig | 49 --
configs/T4240QDS_defconfig | 53 --
include/configs/T4240QDS.h | 555 -------------
29 files changed, 3887 deletions(-)
delete mode 100644 board/freescale/t4qds/Kconfig
delete mode 100644 board/freescale/t4qds/MAINTAINERS
delete mode 100644 board/freescale/t4qds/Makefile
delete mode 100644 board/freescale/t4qds/README
delete mode 100644 board/freescale/t4qds/ddr.c
delete mode 100644 board/freescale/t4qds/ddr.h
delete mode 100644 board/freescale/t4qds/eth.c
delete mode 100644 board/freescale/t4qds/law.c
delete mode 100644 board/freescale/t4qds/pci.c
delete mode 100644 board/freescale/t4qds/spl.c
delete mode 100644 board/freescale/t4qds/t4240emu.c
delete mode 100644 board/freescale/t4qds/t4240qds.c
delete mode 100644 board/freescale/t4qds/t4240qds_qixis.h
delete mode 100644 board/freescale/t4qds/t4_nand_rcw.cfg
delete mode 100644 board/freescale/t4qds/t4_pbi.cfg
delete mode 100644 board/freescale/t4qds/t4_sd_rcw.cfg
delete mode 100644 board/freescale/t4qds/t4qds.h
delete mode 100644 board/freescale/t4qds/tlb.c
delete mode 100644 configs/T4160QDS_NAND_defconfig
delete mode 100644 configs/T4160QDS_SDCARD_defconfig
delete mode 100644 configs/T4160QDS_SECURE_BOOT_defconfig
delete mode 100644 configs/T4160QDS_defconfig
delete mode 100644 configs/T4240QDS_NAND_defconfig
delete mode 100644 configs/T4240QDS_SDCARD_defconfig
delete mode 100644 configs/T4240QDS_SECURE_BOOT_defconfig
delete mode 100644 configs/T4240QDS_SRIO_PCIE_BOOT_defconfig
delete mode 100644 configs/T4240QDS_defconfig
delete mode 100644 include/configs/T4240QDS.h
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 5979e356fb..9801055e54 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -296,15 +296,6 @@ config TARGET_T2081QDS
select FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
select FSL_DDR_INTERACTIVE
-config TARGET_T4160QDS
- bool "Support T4160QDS"
- select ARCH_T4160
- select BOARD_LATE_INIT if CHAIN_OF_TRUST
- select SUPPORT_SPL
- select PHYS_64BIT
- imply CMD_SATA
- imply PANIC_HANG
-
config TARGET_T4160RDB
bool "Support T4160RDB"
select ARCH_T4160
@@ -312,16 +303,6 @@ config TARGET_T4160RDB
select PHYS_64BIT
imply PANIC_HANG
-config TARGET_T4240QDS
- bool "Support T4240QDS"
- select ARCH_T4240
- select BOARD_LATE_INIT if CHAIN_OF_TRUST
- select SUPPORT_SPL
- select PHYS_64BIT
- select FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
- imply CMD_SATA
- imply PANIC_HANG
-
config TARGET_T4240RDB
bool "Support T4240RDB"
select ARCH_T4240
@@ -1538,7 +1519,6 @@ source "board/freescale/t102xrdb/Kconfig"
source "board/freescale/t104xrdb/Kconfig"
source "board/freescale/t208xqds/Kconfig"
source "board/freescale/t208xrdb/Kconfig"
-source "board/freescale/t4qds/Kconfig"
source "board/freescale/t4rdb/Kconfig"
source "board/gdsys/p1022/Kconfig"
source "board/keymile/Kconfig"
diff --git a/board/freescale/t4qds/Kconfig b/board/freescale/t4qds/Kconfig
deleted file mode 100644
index f7c1a0c15d..0000000000
--- a/board/freescale/t4qds/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-if TARGET_T4160QDS || TARGET_T4240QDS
-
-config SYS_BOARD
- default "t4qds"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "T4240QDS"
-
-source "board/freescale/common/Kconfig"
-
-endif
diff --git a/board/freescale/t4qds/MAINTAINERS b/board/freescale/t4qds/MAINTAINERS
deleted file mode 100644
index 44bb2f5c6d..0000000000
--- a/board/freescale/t4qds/MAINTAINERS
+++ /dev/null
@@ -1,18 +0,0 @@
-T4QDS BOARD
-#M: Shaohui Xie <Shaohui.Xie@freescale.com>
-S: Orphan (since 2018-05)
-F: board/freescale/t4qds/
-F: include/configs/T4240QDS.h
-F: configs/T4160QDS_defconfig
-F: configs/T4160QDS_NAND_defconfig
-F: configs/T4160QDS_SDCARD_defconfig
-F: configs/T4240QDS_defconfig
-F: configs/T4240QDS_NAND_defconfig
-F: configs/T4240QDS_SDCARD_defconfig
-F: configs/T4240QDS_SRIO_PCIE_BOOT_defconfig
-
-T4160QDS_SECURE_BOOT BOARD
-M: Ruchika Gupta <ruchika.gupta@nxp.com>
-S: Maintained
-F: configs/T4160QDS_SECURE_BOOT_defconfig
-F: configs/T4240QDS_SECURE_BOOT_defconfig
diff --git a/board/freescale/t4qds/Makefile b/board/freescale/t4qds/Makefile
deleted file mode 100644
index 11144222d3..0000000000
--- a/board/freescale/t4qds/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2012 Freescale Semiconductor, Inc.
-
-ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
-else
-obj-$(CONFIG_TARGET_T4160QDS) += t4240qds.o eth.o
-obj-$(CONFIG_TARGET_T4240QDS) += t4240qds.o eth.o
-obj-$(CONFIG_PCI) += pci.o
-endif
-
-obj-y += ddr.o
-obj-y += law.o
-obj-y += tlb.o
diff --git a/board/freescale/t4qds/README b/board/freescale/t4qds/README
deleted file mode 100644
index bf238146db..0000000000
--- a/board/freescale/t4qds/README
+++ /dev/null
@@ -1,194 +0,0 @@
-Overview
---------
-The T4240QDS is a high-performance computing evaluation, development and test
-platform supporting the T4240 QorIQ? Power Architecture? processor. T4240QDS is
-optimized to support the high-bandwidth DDR3 memory ports, as well as the
-highly-configurable SerDes ports. The system is lead-free and RoHS-compliant.
-
-Board Features
- SERDES Connections
- 32 lanes grouped into four 8-lane banks
- Two ?front side? banks dedicated to Ethernet
- - High-speed crosspoint switch fabric on selected lanes
- - Two PCI Express slots with side-band connector supporting
- - SGMII
- - XAUI
- - HiGig
- - I-pass connectors allow board-to-board and loopback support
- Two ?back side? banks dedicated to other protocols
- - High-speed crosspoint switch fabric on all lanes
- - Four PCI Express slots with side-band connector supporting
- - PCI Express 3.0
- - SATA 2.0
- - SRIO 2.0
- - Supports 4X Aurora debug with two connectors
- DDR Controllers
- Three independant 64-bit DDR3 controllers
- Supports rates of 1866 up to 2133 MHz data-rate
- Supports two DDR3/DDR3LP UDIMM/RDIMMs per controller
- DDR power supplies 1.5V to all devices with automatic tracking of VTT.
- Power software-switchable to 1.35V if software detects all DDR3LP devices.
- MT9JSF25672AZ-2G1KZESZF has been tested at 1333, 1600, 1867, 2000 and
- 2133MT/s speeds. For 1867MT/s and above, read-to-write turnaround time
- increases by 1 clock.
-
- IFC/Local Bus
- NAND flash: 8-bit, async or sync, up to 2GB.
- NOR: 16-bit, Address/Data Multiplexed (ADM), up to 128 MB
- NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
- - NOR devices support 16 virtual banks
- GASIC: Minimal target within Qixis FPGA
- PromJET rapid memory download support
- Address demultiplexing handled within FPGA.
- - Flexible demux allows 8 or 16 bit evaluation.
- IFC Debug/Development card
- - Support for 32-bit devices
- Ethernet
- Support two on-board RGMII 10/100/1G ethernet ports.
- SGMII and XAUI support via SERDES block (see above).
- 1588 support via Symmetricom board.
- QIXIS System Logic FPGA
- Manages system power and reset sequencing
- Manages DUT, board, clock, etc. configuration for dynamic shmoo
- Collects V-I-T data in background for code/power profiling.
- Supports legacy TMT test features (POSt, IRS, SYSCLK-synchronous assertion)
- General fault monitoring and logging
- Runs from ATX ?hot? power rails allowing operation while system is off.
- Clocks
- System and DDR clock (SYSCLK, ?DDRCLK?)
- - Switch selectable to one of 16 common settings in the interval 33MHz-166MHz.
- - Software selectable in 1MHz increments from 1-200MHz.
- SERDES clocks
- - Provides clocks to all SerDes blocks and slots
- - 100, 125 and 156.25 MHz
- Power Supplies
- Dedicated regulators for VDD
- - Adjustable from (0.7V to 1.3V at 80A
- - Regulators can be controlled by VID and/or software
- Dedicated regulator for GVDD_PL: 1.35/1.5V at 22A
- - VTT/MVREF automatically track operating voltage
- Dedicated regulators/filters for AVDD supplies
- Dedicated regulators for other supplies: OVDD, BVDD, DVDD, LVDD, POVDD, etc.
- USB
- Supports two USB 2.0 ports with integrated PHYs
- - One type A, one type micro-AB with 1.0A power per port.
- Other IO
- eSDHC/MMC
- - SDHC card slot
- eSPI port
- - High-speed serial flash
- Two Serial port
- Four I2C ports
- XFI
- XFI is supported on T4QDS-XFI board which removed slot3 and routed
- four Lanes A/B/C/D to a SFP+ cages, which to house fiber cable or
- direct attach cable(copper), the copper cable is used to emulate
- 10GBASE-KR scenario.
- So, for XFI usage, there are two scenarios, one will use fiber cable,
- another will use copper cable. An hwconfig env "fsl_10gkr_copper" is
- introduced to indicate a XFI port will use copper cable, and U-Boot
- will fixup the dtb accordingly.
- It's used as: fsl_10gkr_copper:<10g_mac_name>
- The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2, they
- do not have to be coexist in hwconfig. If a MAC is listed in the env
- "fsl_10gkr_copper", it will use copper cable, otherwise, fiber cable
- will be used by default.
- for ex. set "fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm2_10g1,fm2_10g2" in
- hwconfig, then both four XFI ports will use copper cable.
- set "fsl_10gkr_copper:fm1_10g1,fm1_10g2" in hwconfig, then first two
- XFI ports will use copper cable, the other two XFI ports will use fiber
- cable.
-
-Memory map
-----------
-The addresses in brackets are physical addresses.
-
-0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mapped under with TLB)
-0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory
-0x0_f000_0000 (0xf_0000_0000) - 0x0_f1ff_ffff 32MB DCSR (includes trace buffers)
-0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan
-0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan
-0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO
-0x0_e000_0000 (0xf_e000_0000) - 0x0_efff_ffff 256MB NOR flash
-0x0_fe00_0000 (0xf_fe00_0000) - 0x0_feff_ffff 16MB CCSR
-0x0_ffdf_0000 (0xf_ffdf_0000) - 0x0_ffdf_03ff 4KB QIXIS
-0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores
-
-The physical address of the last (boot page translation) varies with the actual DDR size.
-
-Voltage ID and VDD override
---------------------
-T4240 has a VID feature. U-Boot reads the VID efuses and adjust the voltage
-accordingly. The voltage can also be override by command vdd_override. The
-syntax is
-
-vdd_override <voltage in mV>, eg. 1050 is for 1.050v.
-
-Upon success, the actual voltage will be read back. The value is checked
-for safety and any invalid value will not adjust the voltage.
-
-Another way to override VDD is to use environmental variable, in case of using
-command is too late for some debugging. The syntax is
-
-setenv t4240qds_vdd_mv <voltage in mV>
-saveenv
-reset
-
-The override voltage takes effect when booting.
-
-Note: voltage adjustment needs to be done step by step. Changing voltage too
-rapidly may cause current surge. The voltage stepping is done by software.
-Users can set the final voltage directly.
-
-2-stage NAND/SD boot loader
--------------------------------
-PBL initializes the internal SRAM and copy SPL(160K) in SRAM.
-SPL further initialise DDR using SPD and environment variables
-and copy U-Boot(768 KB) from NAND/SD device to DDR.
-Finally SPL transers control to U-Boot for futher booting.
-
-SPL has following features:
- - Executes within 256K
- - No relocation required
-
-Run time view of SPL framework
--------------------------------------------------
-|Area | Address |
--------------------------------------------------
-|SecureBoot header | 0xFFFC0000 (32KB) |
--------------------------------------------------
-|GD, BD | 0xFFFC8000 (4KB) |
--------------------------------------------------
-|ENV | 0xFFFC9000 (8KB) |
--------------------------------------------------
-|HEAP | 0xFFFCB000 (50KB) |
--------------------------------------------------
-|STACK | 0xFFFD8000 (22KB) |
--------------------------------------------------
-|U-Boot SPL | 0xFFFD8000 (160KB) |
--------------------------------------------------
-
-NAND Flash memory Map on T4QDS
---------------------------------------------------------------
-Start End Definition Size
-0x000000 0x0FFFFF U-Boot img 1MB
-0x140000 0x15FFFF U-Boot env 128KB
-0x160000 0x17FFFF FMAN Ucode 128KB
-
-Micro SD Card memory Map on T4QDS
-----------------------------------------------------
-Block #blocks Definition Size
-0x008 2048 U-Boot img 1MB
-0x800 0016 U-Boot env 8KB
-0x820 0128 FMAN ucode 64KB
-
-Switch Settings: (ON is 1, OFF is 0)
-===============
-NAND boot SW setting:
-SW1[1:8] = 10000010
-SW2[1.1] = 0
-SW6[1:4] = 1001
-
-SD boot SW setting:
-SW1[1:8] = 00100000
-SW2[1.1] = 0
diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c
deleted file mode 100644
index 4fdd69d424..0000000000
--- a/board/freescale/t4qds/ddr.c
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <init.h>
-#include <log.h>
-#include <asm/mmu.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/fsl_law.h>
-#include "ddr.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
- ulong ddr_freq;
-
- if (ctrl_num > 2) {
- printf("Not supported controller number %d\n", ctrl_num);
- return;
- }
- if (!pdimm->n_ranks)
- return;
-
- /*
- * we use identical timing for all slots. If needed, change the code
- * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
- */
- if (popts->registered_dimm_en)
- pbsp = rdimms[0];
- else
- pbsp = udimms[0];
-
-
- /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
- * freqency and n_banks specified in board_specific_parameters table.
- */
- ddr_freq = get_ddr_freq(0) / 1000000;
- while (pbsp->datarate_mhz_high) {
- if (pbsp->n_ranks == pdimm->n_ranks &&
- (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
- if (ddr_freq <= pbsp->datarate_mhz_high) {
- popts->cpo_override = pbsp->cpo;
- popts->write_data_delay =
- pbsp->write_data_delay;
- popts->clk_adjust = pbsp->clk_adjust;
- popts->wrlvl_start = pbsp->wrlvl_start;
- popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
- popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
- popts->twot_en = pbsp->force_2t;
- goto found;
- }
- pbsp_highest = pbsp;
- }
- pbsp++;
- }
-
- if (pbsp_highest) {
- printf("Error: board specific timing not found "
- "for data rate %lu MT/s\n"
- "Trying to use the highest speed (%u) parameters\n",
- ddr_freq, pbsp_highest->datarate_mhz_high);
- popts->cpo_override = pbsp_highest->cpo;
- popts->write_data_delay = pbsp_highest->write_data_delay;
- popts->clk_adjust = pbsp_highest->clk_adjust;
- popts->wrlvl_start = pbsp_highest->wrlvl_start;
- popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
- popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
- popts->twot_en = pbsp_highest->force_2t;
- } else {
- panic("DIMM is not supported by this board");
- }
-found:
- debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
- "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
- "wrlvl_ctrl_3 0x%x\n",
- pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
- pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
- pbsp->wrlvl_ctl_3);
-
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
- */
- popts->half_strength_driver_enable = 0;
- /*
- * Write leveling override
- */
- popts->wrlvl_override = 1;
- popts->wrlvl_sample = 0xf;
-
- /*
- * Rtt and Rtt_WR override
- */
- popts->rtt_override = 0;
-
- /* Enable ZQ calibration */
- popts->zq_en = 1;
-
- /* DHC_EN =1, ODT = 75 Ohm */
- popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
- popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
-
- /* optimize cpo for erratum A-009942 */
- popts->cpo_sample = 0x63;
-}
-
-int dram_init(void)
-{
- phys_size_t dram_size;
-
- puts("Initializing....using SPD\n");
-
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
- dram_size = fsl_ddr_sdram();
-#else
- /* DDR has been initialised by first stage boot loader */
- dram_size = fsl_ddr_sdram_size();
-#endif
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- gd->ram_size = dram_size;
-
- return 0;
-}
diff --git a/board/freescale/t4qds/ddr.h b/board/freescale/t4qds/ddr.h
deleted file mode 100644
index a28d4314da..0000000000
--- a/board/freescale/t4qds/ddr.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DDR_H__
-#define __DDR_H__
-struct board_specific_parameters {
- u32 n_ranks;
- u32 datarate_mhz_high;
- u32 rank_gb;
- u32 clk_adjust;
- u32 wrlvl_start;
- u32 wrlvl_ctl_2;
- u32 wrlvl_ctl_3;
- u32 cpo;
- u32 write_data_delay;
- u32 force_2t;
-};
-
-/*
- * These tables contain all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-
-static const struct board_specific_parameters udimm0[] = {
- /*
- * memory controller 0
- * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
- * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
- */
- {2, 1350, 4, 8, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
- {2, 1350, 0, 10, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0},
- {2, 1666, 4, 8, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0},
- {2, 1666, 0, 10, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0},
- {2, 1900, 0, 8, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
- {2, 2140, 0, 8, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
- {1, 1350, 0, 10, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
- {1, 1700, 0, 10, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
- {1, 1900, 0, 8, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
- {1, 2140, 0, 8, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
- {}
-};
-
-static const struct board_specific_parameters rdimm0[] = {
- /*
- * memory controller 0
- * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
- * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
- */
- {4, 1350, 0, 10, 9, 0x08070605, 0x06070806, 0xff, 2, 0},
- {4, 1666, 0, 10, 11, 0x0a080706, 0x07090906, 0xff, 2, 0},
- {4, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0},
- {2, 1350, 0, 10, 9, 0x08070605, 0x06070806, 0xff, 2, 0},
- {2, 1666, 0, 10, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0},
- {2, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0},
- {1, 1350, 0, 10, 9, 0x08070605, 0x06070806, 0xff, 2, 0},
- {1, 1666, 0, 10, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0},
- {1, 2140, 0, 8, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0},
- {}
-};
-
-/*
- * The three slots have slightly different timing. The center values are good
- * for all slots. We use identical speed tables for them. In future use, if
- * DIMMs require separated tables, make more entries as needed.
- */
-static const struct board_specific_parameters *udimms[] = {
- udimm0,
-};
-
-/*
- * The three slots have slightly different timing. See comments above.
- */
-static const struct board_specific_parameters *rdimms[] = {
- rdimm0,
-};
-
-
-#endif
diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
deleted file mode 100644
index 810868ff39..0000000000
--- a/board/freescale/t4qds/eth.c
+++ /dev/null
@@ -1,869 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <fdt_support.h>
-#include <log.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <malloc.h>
-#include <fm_eth.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <fsl_dtsec.h>
-#include <asm/fsl_serdes.h>
-#include <hwconfig.h>
-#include "../common/qixis.h"
-#include "../common/fman.h"
-#include <linux/libfdt.h>
-
-#include "t4240qds_qixis.h"
-
-#define EMI_NONE 0xFFFFFFFF
-#define EMI1_RGMII 0
-#define EMI1_SLOT1 1
-#define EMI1_SLOT2 2
-#define EMI1_SLOT3 3
-#define EMI1_SLOT4 4
-#define EMI1_SLOT5 5
-#define EMI1_SLOT7 7
-#define EMI2 8
-/* Slot6 and Slot8 do not have EMI connections */
-
-static int mdio_mux[NUM_FM_PORTS];
-
-static const char *mdio_names[] = {
- "T4240QDS_MDIO0",
- "T4240QDS_MDIO1",
- "T4240QDS_MDIO2",
- "T4240QDS_MDIO3",
- "T4240QDS_MDIO4",
- "T4240QDS_MDIO5",
- "NULL",
- "T4240QDS_MDIO7",
- "T4240QDS_10GC",
-};
-
-static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2};
-static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4};
-static u8 slot_qsgmii_phyaddr[5][4] = {
- {0, 0, 0, 0},/* not used, to make index match slot No. */
- {0, 1, 2, 3},
- {4, 5, 6, 7},
- {8, 9, 0xa, 0xb},
- {0xc, 0xd, 0xe, 0xf},
-};
-static u8 qsgmiiphy_fix[NUM_FM_PORTS] = {0};
-
-static const char *t4240qds_mdio_name_for_muxval(u8 muxval)
-{
- return mdio_names[muxval];
-}
-
-struct mii_dev *mii_dev_for_muxval(u8 muxval)
-{
- struct mii_dev *bus;
- const char *name = t4240qds_mdio_name_for_muxval(muxval);
-
- if (!name) {
- printf("No bus for muxval %x\n", muxval);
- return NULL;
- }
-
- bus = miiphy_get_dev_by_name(name);
-
- if (!bus) {
- printf("No bus by name %s\n", name);
- return NULL;
- }
-
- return bus;
-}
-
-struct t4240qds_mdio {
- u8 muxval;
- struct mii_dev *realbus;
-};
-
-static void t4240qds_mux_mdio(u8 muxval)
-{
- u8 brdcfg4;
- if ((muxval < 6) || (muxval == 7)) {
- brdcfg4 = QIXIS_READ(brdcfg[4]);
- brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
- brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
- QIXIS_WRITE(brdcfg[4], brdcfg4);
- }
-}
-
-static int t4240qds_mdio_read(struct mii_dev *bus, int addr, int devad,
- int regnum)
-{
- struct t4240qds_mdio *priv = bus->priv;
-
- t4240qds_mux_mdio(priv->muxval);
-
- return priv->realbus->read(priv->realbus, addr, devad, regnum);
-}
-
-static int t4240qds_mdio_write(struct mii_dev *bus, int addr, int devad,
- int regnum, u16 value)
-{
- struct t4240qds_mdio *priv = bus->priv;
-
- t4240qds_mux_mdio(priv->muxval);
-
- return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
-}
-
-static int t4240qds_mdio_reset(struct mii_dev *bus)
-{
- struct t4240qds_mdio *priv = bus->priv;
-
- return priv->realbus->reset(priv->realbus);
-}
-
-static int t4240qds_mdio_init(char *realbusname, u8 muxval)
-{
- struct t4240qds_mdio *pmdio;
- struct mii_dev *bus = mdio_alloc();
-
- if (!bus) {
- printf("Failed to allocate T4240QDS MDIO bus\n");
- return -1;
- }
-
- pmdio = malloc(sizeof(*pmdio));
- if (!pmdio) {
- printf("Failed to allocate T4240QDS private data\n");
- free(bus);
- return -1;
- }
-
- bus->read = t4240qds_mdio_read;
- bus->write = t4240qds_mdio_write;
- bus->reset = t4240qds_mdio_reset;
- strcpy(bus->name, t4240qds_mdio_name_for_muxval(muxval));
-
- pmdio->realbus = miiphy_get_dev_by_name(realbusname);
-
- if (!pmdio->realbus) {
- printf("No bus with name %s\n", realbusname);
- free(bus);
- free(pmdio);
- return -1;
- }
-
- pmdio->muxval = muxval;
- bus->priv = pmdio;
-
- return mdio_register(bus);
-}
-
-void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
- enum fm_port port, int offset)
-{
- int interface = fm_info_get_enet_if(port);
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
-
- prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
-
- if (interface == PHY_INTERFACE_MODE_SGMII ||
- interface == PHY_INTERFACE_MODE_QSGMII) {
- switch (port) {
- case FM1_DTSEC1:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy21");
- break;
- case FM1_DTSEC2:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy22");
- break;
- case FM1_DTSEC3:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy23");
- break;
- case FM1_DTSEC4:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy24");
- break;
- case FM1_DTSEC6:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy12");
- break;
- case FM1_DTSEC9:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy14");
- else
- fdt_set_phy_handle(blob, prop, pa,
- "phy_sgmii4");
- break;
- case FM1_DTSEC10:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy13");
- else
- fdt_set_phy_handle(blob, prop, pa,
- "phy_sgmii3");
- break;
- case FM2_DTSEC1:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy41");
- break;
- case FM2_DTSEC2:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy42");
- break;
- case FM2_DTSEC3:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy43");
- break;
- case FM2_DTSEC4:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy44");
- break;
- case FM2_DTSEC6:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy32");
- break;
- case FM2_DTSEC9:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy34");
- else
- fdt_set_phy_handle(blob, prop, pa,
- "phy_sgmii12");
- break;
- case FM2_DTSEC10:
- if (qsgmiiphy_fix[port])
- fdt_set_phy_handle(blob, prop, pa,
- "sgmii_phy33");
- else
- fdt_set_phy_handle(blob, prop, pa,
- "phy_sgmii11");
- break;
- default:
- break;
- }
- } else if (interface == PHY_INTERFACE_MODE_XGMII &&
- ((prtcl2 == 55) || (prtcl2 == 57))) {
- /*
- * if the 10G is XFI, check hwconfig to see what is the
- * media type, there are two types, fiber or copper,
- * fix the dtb accordingly.
- */
- int media_type = 0;
- struct fixed_link f_link;
- char lane_mode[20] = {"10GBASE-KR"};
- char buf[32] = "serdes-2,";
- int off;
-
- switch (port) {
- case FM1_10GEC1:
- if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g1")) {
- media_type = 1;
- fdt_set_phy_handle(blob, prop, pa,
- "phy_xfi1");
- sprintf(buf, "%s%s%s", buf, "lane-a,",
- (char *)lane_mode);
- }
- break;
- case FM1_10GEC2:
- if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g2")) {
- media_type = 1;
- fdt_set_phy_handle(blob, prop, pa,
- "phy_xfi2");
- sprintf(buf, "%s%s%s", buf, "lane-b,",
- (char *)lane_mode);
- }
- break;
- case FM2_10GEC1:
- if (hwconfig_sub("fsl_10gkr_copper", "fm2_10g1")) {
- media_type = 1;
- fdt_set_phy_handle(blob, prop, pa,
- "phy_xfi3");
- sprintf(buf, "%s%s%s", buf, "lane-d,",
- (char *)lane_mode);
- }
- break;
- case FM2_10GEC2:
- if (hwconfig_sub("fsl_10gkr_copper", "fm2_10g2")) {
- media_type = 1;
- fdt_set_phy_handle(blob, prop, pa,
- "phy_xfi4");
- sprintf(buf, "%s%s%s", buf, "lane-c,",
- (char *)lane_mode);
- }
- break;
- default:
- return;
- }
-
- if (!media_type) {
- /* fixed-link is used for XFI fiber cable */
- fdt_delprop(blob, offset, "phy-handle");
- f_link.phy_id = port;
- f_link.duplex = 1;
- f_link.link_speed = 10000;
- f_link.pause = 0;
- f_link.asym_pause = 0;
- fdt_setprop(blob, offset, "fixed-link", &f_link,
- sizeof(f_link));
- } else {
- /* set property for copper cable */
- off = fdt_node_offset_by_compat_reg(blob,
- "fsl,fman-memac-mdio", pa + 0x1000);
- fdt_setprop_string(blob, off, "lane-instance", buf);
- }
- }
-}
-
-void fdt_fixup_board_enet(void *fdt)
-{
- int i;
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
-
- prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
- for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) {
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_QSGMII:
- switch (mdio_mux[i]) {
- case EMI1_SLOT1:
- fdt_status_okay_by_alias(fdt, "emi1_slot1");
- break;
- case EMI1_SLOT2:
- fdt_status_okay_by_alias(fdt, "emi1_slot2");
- break;
- case EMI1_SLOT3:
- fdt_status_okay_by_alias(fdt, "emi1_slot3");
- break;
- case EMI1_SLOT4:
- fdt_status_okay_by_alias(fdt, "emi1_slot4");
- break;
- default:
- break;
- }
- break;
- case PHY_INTERFACE_MODE_XGMII:
- /* check if it's XFI interface for 10g */
- if ((prtcl2 == 55) || (prtcl2 == 57)) {
- if (i == FM1_10GEC1 && hwconfig_sub(
- "fsl_10gkr_copper", "fm1_10g1"))
- fdt_status_okay_by_alias(
- fdt, "xfi_pcs_mdio1");
- if (i == FM1_10GEC2 && hwconfig_sub(
- "fsl_10gkr_copper", "fm1_10g2"))
- fdt_status_okay_by_alias(
- fdt, "xfi_pcs_mdio2");
- if (i == FM2_10GEC1 && hwconfig_sub(
- "fsl_10gkr_copper", "fm2_10g1"))
- fdt_status_okay_by_alias(
- fdt, "xfi_pcs_mdio3");
- if (i == FM2_10GEC2 && hwconfig_sub(
- "fsl_10gkr_copper", "fm2_10g2"))
- fdt_status_okay_by_alias(
- fdt, "xfi_pcs_mdio4");
- break;
- }
- switch (i) {
- case FM1_10GEC1:
- fdt_status_okay_by_alias(fdt, "emi2_xauislot1");
- break;
- case FM1_10GEC2:
- fdt_status_okay_by_alias(fdt, "emi2_xauislot2");
- break;
- case FM2_10GEC1:
- fdt_status_okay_by_alias(fdt, "emi2_xauislot3");
- break;
- case FM2_10GEC2:
- fdt_status_okay_by_alias(fdt, "emi2_xauislot4");
- break;
- default:
- break;
- }
- break;
- default:
- break;
- }
- }
-}
-
-static void initialize_qsgmiiphy_fix(void)
-{
- int i;
- unsigned short reg;
-
- for (i = 1; i <= 4; i++) {
- /*
- * Try to read if a SGMII card is used, we do it slot by slot.
- * if a SGMII PHY address is valid on a slot, then we mark
- * all ports on the slot, then fix the PHY address for the
- * marked port when doing dtb fixup.
- */
- if (miiphy_read(mdio_names[i],
- SGMII_CARD_PORT1_PHY_ADDR, MII_PHYSID2, ®) != 0) {
- debug("Slot%d PHY ID register 2 read failed\n", i);
- continue;
- }
-
- debug("Slot%d MII_PHYSID2 @ 0x1c= 0x%04x\n", i, reg);
-
- if (reg == 0xFFFF) {
- /* No physical device present@this address */
- continue;
- }
-
- switch (i) {
- case 1:
- qsgmiiphy_fix[FM1_DTSEC5] = 1;
- qsgmiiphy_fix[FM1_DTSEC6] = 1;
- qsgmiiphy_fix[FM1_DTSEC9] = 1;
- qsgmiiphy_fix[FM1_DTSEC10] = 1;
- slot_qsgmii_phyaddr[1][0] = SGMII_CARD_PORT1_PHY_ADDR;
- slot_qsgmii_phyaddr[1][1] = SGMII_CARD_PORT2_PHY_ADDR;
- slot_qsgmii_phyaddr[1][2] = SGMII_CARD_PORT3_PHY_ADDR;
- slot_qsgmii_phyaddr[1][3] = SGMII_CARD_PORT4_PHY_ADDR;
- break;
- case 2:
- qsgmiiphy_fix[FM1_DTSEC1] = 1;
- qsgmiiphy_fix[FM1_DTSEC2] = 1;
- qsgmiiphy_fix[FM1_DTSEC3] = 1;
- qsgmiiphy_fix[FM1_DTSEC4] = 1;
- slot_qsgmii_phyaddr[2][0] = SGMII_CARD_PORT1_PHY_ADDR;
- slot_qsgmii_phyaddr[2][1] = SGMII_CARD_PORT2_PHY_ADDR;
- slot_qsgmii_phyaddr[2][2] = SGMII_CARD_PORT3_PHY_ADDR;
- slot_qsgmii_phyaddr[2][3] = SGMII_CARD_PORT4_PHY_ADDR;
- break;
- case 3:
- qsgmiiphy_fix[FM2_DTSEC5] = 1;
- qsgmiiphy_fix[FM2_DTSEC6] = 1;
- qsgmiiphy_fix[FM2_DTSEC9] = 1;
- qsgmiiphy_fix[FM2_DTSEC10] = 1;
- slot_qsgmii_phyaddr[3][0] = SGMII_CARD_PORT1_PHY_ADDR;
- slot_qsgmii_phyaddr[3][1] = SGMII_CARD_PORT2_PHY_ADDR;
- slot_qsgmii_phyaddr[3][2] = SGMII_CARD_PORT3_PHY_ADDR;
- slot_qsgmii_phyaddr[3][3] = SGMII_CARD_PORT4_PHY_ADDR;
- break;
- case 4:
- qsgmiiphy_fix[FM2_DTSEC1] = 1;
- qsgmiiphy_fix[FM2_DTSEC2] = 1;
- qsgmiiphy_fix[FM2_DTSEC3] = 1;
- qsgmiiphy_fix[FM2_DTSEC4] = 1;
- slot_qsgmii_phyaddr[4][0] = SGMII_CARD_PORT1_PHY_ADDR;
- slot_qsgmii_phyaddr[4][1] = SGMII_CARD_PORT2_PHY_ADDR;
- slot_qsgmii_phyaddr[4][2] = SGMII_CARD_PORT3_PHY_ADDR;
- slot_qsgmii_phyaddr[4][3] = SGMII_CARD_PORT4_PHY_ADDR;
- break;
- default:
- break;
- }
- }
-}
-
-int board_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_FMAN_ENET)
- int i, idx, lane, slot, interface;
- struct memac_mdio_info dtsec_mdio_info;
- struct memac_mdio_info tgec_mdio_info;
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 srds_prtcl_s1, srds_prtcl_s2;
-
- srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
- FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
- srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
- srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
- FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
- srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
-
- /* Initialize the mdio_mux array so we can recognize empty elements */
- for (i = 0; i < NUM_FM_PORTS; i++)
- mdio_mux[i] = EMI_NONE;
-
- dtsec_mdio_info.regs =
- (struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR;
-
- dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
-
- /* Register the 1G MDIO bus */
- fm_memac_mdio_init(bis, &dtsec_mdio_info);
-
- tgec_mdio_info.regs =
- (struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR;
- tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
-
- /* Register the 10G MDIO bus */
- fm_memac_mdio_init(bis, &tgec_mdio_info);
-
- /* Register the muxing front-ends to the MDIO buses */
- t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII);
- t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
- t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
- t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
- t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
- t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
- t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
- t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
-
- initialize_qsgmiiphy_fix();
-
- switch (srds_prtcl_s1) {
- case 1:
- case 2:
- case 4:
- /* XAUI/HiGig in Slot1 and Slot2 */
- fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
- fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR);
- break;
- case 27:
- case 28:
- case 35:
- case 36:
- /* SGMII in Slot1 and Slot2 */
- fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]);
- fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]);
- fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]);
- fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]);
- fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]);
- fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
- if ((srds_prtcl_s2 != 55) && (srds_prtcl_s2 != 57)) {
- fm_info_set_phy_address(FM1_DTSEC9,
- slot_qsgmii_phyaddr[1][3]);
- fm_info_set_phy_address(FM1_DTSEC10,
- slot_qsgmii_phyaddr[1][2]);
- }
- break;
- case 37:
- case 38:
- fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]);
- fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]);
- fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]);
- fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]);
- fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]);
- fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
- if ((srds_prtcl_s2 != 55) && (srds_prtcl_s2 != 57)) {
- fm_info_set_phy_address(FM1_DTSEC9,
- slot_qsgmii_phyaddr[1][2]);
- fm_info_set_phy_address(FM1_DTSEC10,
- slot_qsgmii_phyaddr[1][3]);
- }
- break;
- case 39:
- case 40:
- case 45:
- case 46:
- case 47:
- case 48:
- fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]);
- fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
- if ((srds_prtcl_s2 != 55) && (srds_prtcl_s2 != 57)) {
- fm_info_set_phy_address(FM1_DTSEC10,
- slot_qsgmii_phyaddr[1][2]);
- fm_info_set_phy_address(FM1_DTSEC9,
- slot_qsgmii_phyaddr[1][3]);
- }
- fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]);
- fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]);
- fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]);
- fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]);
- break;
- default:
- puts("Invalid SerDes1 protocol for T4240QDS\n");
- break;
- }
-
- for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
- idx = i - FM1_DTSEC1;
- interface = fm_info_get_enet_if(i);
- switch (interface) {
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_QSGMII:
- if (interface == PHY_INTERFACE_MODE_QSGMII) {
- if (idx <= 3)
- lane = serdes_get_first_lane(FSL_SRDS_1,
- QSGMII_FM1_A);
- else
- lane = serdes_get_first_lane(FSL_SRDS_1,
- QSGMII_FM1_B);
- if (lane < 0)
- break;
- slot = lane_to_slot_fsm1[lane];
- debug("FM1 at DTSEC%u expects QSGMII in slot %u\n",
- idx + 1, slot);
- } else {
- lane = serdes_get_first_lane(FSL_SRDS_1,
- SGMII_FM1_DTSEC1 + idx);
- if (lane < 0)
- break;
- slot = lane_to_slot_fsm1[lane];
- debug("FM1 at DTSEC%u expects SGMII in slot %u\n",
- idx + 1, slot);
- }
- if (QIXIS_READ(present2) & (1 << (slot - 1)))
- fm_disable_port(i);
- switch (slot) {
- case 1:
- mdio_mux[i] = EMI1_SLOT1;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- case 2:
- mdio_mux[i] = EMI1_SLOT2;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- };
- break;
- case PHY_INTERFACE_MODE_RGMII:
- /* FM1 DTSEC5 routes to RGMII with EC2 */
- debug("FM1 at DTSEC%u is RGMII at address %u\n",
- idx + 1, 2);
- if (i == FM1_DTSEC5)
- fm_info_set_phy_address(i, 2);
- mdio_mux[i] = EMI1_RGMII;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- default:
- break;
- }
- }
-
- for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
- idx = i - FM1_10GEC1;
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_XGMII:
- if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 == 57)) {
- /* A fake PHY address to make U-Boot happy */
- fm_info_set_phy_address(i, i);
- } else {
- lane = serdes_get_first_lane(FSL_SRDS_1,
- XAUI_FM1_MAC9 + idx);
- if (lane < 0)
- break;
- slot = lane_to_slot_fsm1[lane];
- if (QIXIS_READ(present2) & (1 << (slot - 1)))
- fm_disable_port(i);
- }
- mdio_mux[i] = EMI2;
- fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
- break;
- default:
- break;
- }
- }
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
- switch (srds_prtcl_s2) {
- case 1:
- case 2:
- case 4:
- /* XAUI/HiGig in Slot3 and Slot4 */
- fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
- fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC2_PHY_ADDR);
- break;
- case 6:
- case 7:
- case 12:
- case 13:
- case 14:
- case 15:
- case 16:
- case 21:
- case 22:
- case 23:
- case 24:
- case 25:
- case 26:
- /* XAUI/HiGig in Slot3, SGMII in Slot4 */
- fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
- fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
- fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
- fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
- break;
- case 27:
- case 28:
- case 35:
- case 36:
- /* SGMII in Slot3 and Slot4 */
- fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
- fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
- fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
- fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
- fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]);
- fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]);
- fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]);
- fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]);
- break;
- case 37:
- case 38:
- /* QSGMII in Slot3 and Slot4 */
- fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
- fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
- fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
- fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
- fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]);
- fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]);
- fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][2]);
- fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][3]);
- break;
- case 39:
- case 40:
- case 45:
- case 46:
- case 47:
- case 48:
- /* SGMII in Slot3 */
- fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]);
- fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]);
- fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]);
- fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]);
- /* QSGMII in Slot4 */
- fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
- fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
- fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
- fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
- break;
- case 49:
- case 50:
- case 51:
- case 52:
- case 53:
- case 54:
- fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
- fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
- fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
- fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
- break;
- case 55:
- case 57:
- /* XFI in Slot3, SGMII in Slot4 */
- fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
- fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
- fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
- fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
- break;
- default:
- puts("Invalid SerDes2 protocol for T4240QDS\n");
- break;
- }
-
- for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
- idx = i - FM2_DTSEC1;
- interface = fm_info_get_enet_if(i);
- switch (interface) {
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_QSGMII:
- if (interface == PHY_INTERFACE_MODE_QSGMII) {
- if (idx <= 3)
- lane = serdes_get_first_lane(FSL_SRDS_2,
- QSGMII_FM2_A);
- else
- lane = serdes_get_first_lane(FSL_SRDS_2,
- QSGMII_FM2_B);
- if (lane < 0)
- break;
- slot = lane_to_slot_fsm2[lane];
- debug("FM2 at DTSEC%u expects QSGMII in slot %u\n",
- idx + 1, slot);
- } else {
- lane = serdes_get_first_lane(FSL_SRDS_2,
- SGMII_FM2_DTSEC1 + idx);
- if (lane < 0)
- break;
- slot = lane_to_slot_fsm2[lane];
- debug("FM2 at DTSEC%u expects SGMII in slot %u\n",
- idx + 1, slot);
- }
- if (QIXIS_READ(present2) & (1 << (slot - 1)))
- fm_disable_port(i);
- switch (slot) {
- case 3:
- mdio_mux[i] = EMI1_SLOT3;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- case 4:
- mdio_mux[i] = EMI1_SLOT4;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- };
- break;
- case PHY_INTERFACE_MODE_RGMII:
- /*
- * If DTSEC5 is RGMII, then it's routed via via EC1 to
- * the first on-board RGMII port. If DTSEC6 is RGMII,
- * then it's routed via via EC2 to the second on-board
- * RGMII port.
- */
- debug("FM2 at DTSEC%u is RGMII at address %u\n",
- idx + 1, i == FM2_DTSEC5 ? 1 : 2);
- fm_info_set_phy_address(i, i == FM2_DTSEC5 ? 1 : 2);
- mdio_mux[i] = EMI1_RGMII;
- fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
- break;
- default:
- break;
- }
- }
-
- for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
- idx = i - FM2_10GEC1;
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_XGMII:
- if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 == 57)) {
- /* A fake PHY address to make U-Boot happy */
- fm_info_set_phy_address(i, i);
- } else {
- lane = serdes_get_first_lane(FSL_SRDS_2,
- XAUI_FM2_MAC9 + idx);
- if (lane < 0)
- break;
- slot = lane_to_slot_fsm2[lane];
- if (QIXIS_READ(present2) & (1 << (slot - 1)))
- fm_disable_port(i);
- }
- mdio_mux[i] = EMI2;
- fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
- break;
- default:
- break;
- }
- }
-#endif /* CONFIG_SYS_NUM_FMAN */
-
- cpu_eth_init(bis);
-#endif /* CONFIG_FMAN_ENET */
-
- return pci_eth_init(bis);
-}
diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c
deleted file mode 100644
index cb7bdf391b..0000000000
--- a/board/freescale/t4qds/law.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
- SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
-#ifdef CONFIG_SYS_BMAN_MEM_PHYS
- SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
-#endif
-#ifdef CONFIG_SYS_QMAN_MEM_PHYS
- SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
-#endif
-#ifdef QIXIS_BASE_PHYS
- SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
-#endif
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
- /* Limit DCSR to 32M to access NPC Trace Buffer */
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
-#endif
-#ifdef CONFIG_SYS_NAND_BASE_PHYS
- SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
-#endif
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/t4qds/pci.c b/board/freescale/t4qds/pci.c
deleted file mode 100644
index 26e2a0af4a..0000000000
--- a/board/freescale/t4qds/pci.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2007-2012 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-void pci_init_board(void)
-{
- fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, bd_t *bd)
-{
- FT_FSL_PCI_SETUP;
-}
diff --git a/board/freescale/t4qds/spl.c b/board/freescale/t4qds/spl.c
deleted file mode 100644
index d72d207a76..0000000000
--- a/board/freescale/t4qds/spl.c
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <console.h>
-#include <env_internal.h>
-#include <init.h>
-#include <asm/spl.h>
-#include <malloc.h>
-#include <ns16550.h>
-#include <nand.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <i2c.h>
-#include "../common/qixis.h"
-#include "t4240qds_qixis.h"
-
-#define FSL_CORENET_CCSR_PORSR1_RCW_MASK 0xFF800000
-
-DECLARE_GLOBAL_DATA_PTR;
-
-phys_size_t get_effective_memsize(void)
-{
- return CONFIG_SYS_L3_SIZE;
-}
-
-unsigned long get_board_sys_clk(void)
-{
- u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
-
- switch (sysclk_conf & 0x0F) {
- case QIXIS_SYSCLK_83:
- return 83333333;
- case QIXIS_SYSCLK_100:
- return 100000000;
- case QIXIS_SYSCLK_125:
- return 125000000;
- case QIXIS_SYSCLK_133:
- return 133333333;
- case QIXIS_SYSCLK_150:
- return 150000000;
- case QIXIS_SYSCLK_160:
- return 160000000;
- case QIXIS_SYSCLK_166:
- return 166666666;
- }
- return 66666666;
-}
-
-unsigned long get_board_ddr_clk(void)
-{
- u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
-
- switch ((ddrclk_conf & 0x30) >> 4) {
- case QIXIS_DDRCLK_100:
- return 100000000;
- case QIXIS_DDRCLK_125:
- return 125000000;
- case QIXIS_DDRCLK_133:
- return 133333333;
- }
- return 66666666;
-}
-
-void board_init_f(ulong bootflag)
-{
- u32 plat_ratio, sys_clk, ccb_clk;
- ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-#ifdef CONFIG_SPL_NAND_BOOT
- u32 porsr1, pinctl;
-#endif
-
-#ifdef CONFIG_SPL_NAND_BOOT
- porsr1 = in_be32(&gur->porsr1);
- pinctl = ((porsr1 & ~(FSL_CORENET_CCSR_PORSR1_RCW_MASK)) | 0x24800000);
- out_be32((unsigned int *)(CONFIG_SYS_DCSRBAR + 0x20000), pinctl);
-#endif
- /* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
- memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
-
- /* Update GD pointer */
- gd = (gd_t *)(CONFIG_SPL_GD_ADDR);
-
- /* compiler optimization barrier needed for GCC >= 3.4 */
- __asm__ __volatile__("" : : : "memory");
-
- console_init_f();
-
- /* initialize selected port with appropriate baud rate */
- sys_clk = get_board_sys_clk();
- plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
- ccb_clk = sys_clk * plat_ratio / 2;
-
- NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
- ccb_clk / 16 / CONFIG_BAUDRATE);
-
-#ifdef CONFIG_SPL_MMC_BOOT
- puts("\nSD boot...\n");
-#elif defined(CONFIG_SPL_NAND_BOOT)
- puts("\nNAND boot...\n");
-#endif
- relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
- bd_t *bd;
-
- bd = (bd_t *)(gd + sizeof(gd_t));
- memset(bd, 0, sizeof(bd_t));
- gd->bd = bd;
- bd->bi_memstart = CONFIG_SYS_INIT_L3_ADDR;
- bd->bi_memsize = CONFIG_SYS_L3_SIZE;
-
- arch_cpu_init();
- get_clocks();
- mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
- CONFIG_SPL_RELOC_MALLOC_SIZE);
- gd->flags |= GD_FLG_FULL_MALLOC_INIT;
-
-#ifdef CONFIG_SPL_NAND_BOOT
- nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
- (uchar *)SPL_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_MMC_BOOT
- mmc_initialize(bd);
- mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
- (uchar *)SPL_ENV_ADDR);
-#endif
-
- gd->env_addr = (ulong)(SPL_ENV_ADDR);
- gd->env_valid = ENV_VALID;
-
- i2c_init_all();
-
- dram_init();
-
-#ifdef CONFIG_SPL_MMC_BOOT
- mmc_boot();
-#elif defined(CONFIG_SPL_NAND_BOOT)
- nand_boot();
-#endif
-}
diff --git a/board/freescale/t4qds/t4240emu.c b/board/freescale/t4qds/t4240emu.c
deleted file mode 100644
index 8f2032acc7..0000000000
--- a/board/freescale/t4qds/t4240emu.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <fdt_support.h>
-#include <i2c.h>
-#include <image.h>
-#include <init.h>
-#include <netdev.h>
-#include <linux/compiler.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_liodn.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
- struct cpu_type *cpu = gd->arch.cpu;
-
- printf("Board: %sEMU\n", cpu->name);
-
- return 0;
-}
-
-int board_early_init_r(void)
-{
- const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
- /*
- * Remap Boot flash + PROMJET region to caching-inhibited
- * so that flash can be erased properly.
- */
-
- /* Flush d-cache and invalidate i-cache of any FLASH data */
- flush_dcache();
- invalidate_icache();
-
- if (flash_esel == -1) {
- /* very unlikely unless something is messed up */
- puts("Error: Could not find TLB for FLASH BASE\n");
- flash_esel = 2; /* give our best effort to continue */
- } else {
- /* invalidate existing TLB entry for flash */
- disable_tlb(flash_esel);
- }
-
- set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- return 0;
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
- phys_addr_t base;
- phys_size_t size;
-
- ft_cpu_setup(blob, bd);
-
- base = env_get_bootm_low();
- size = env_get_bootm_size();
-
- fdt_fixup_memory(blob, (u64)base, (u64)size);
-
- fdt_fixup_liodn(blob);
- fsl_fdt_fixup_dr_usb(blob, bd);
-
- return 0;
-}
diff --git a/board/freescale/t4qds/t4240qds.c b/board/freescale/t4qds/t4240qds.c
deleted file mode 100644
index 543a2cb6e2..0000000000
--- a/board/freescale/t4qds/t4240qds.c
+++ /dev/null
@@ -1,929 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2009-2012 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <fdt_support.h>
-#include <i2c.h>
-#include <image.h>
-#include <init.h>
-#include <irq_func.h>
-#include <log.h>
-#include <netdev.h>
-#include <linux/compiler.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_liodn.h>
-#include <fm_eth.h>
-#include <linux/delay.h>
-
-#include "../common/qixis.h"
-#include "../common/vsc3316_3308.h"
-#include "t4qds.h"
-#include "t4240qds_qixis.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
- {8, 8}, {9, 9}, {14, 14}, {15, 15} };
-
-static int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
- {10, 10}, {11, 11}, {12, 12}, {13, 13} };
-
-static int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
- {10, 11}, {11, 10}, {12, 2}, {13, 3} };
-
-static int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
- {8, 9}, {9, 8}, {14, 1}, {15, 0} };
-
-int checkboard(void)
-{
- char buf[64];
- u8 sw;
- struct cpu_type *cpu = gd->arch.cpu;
- unsigned int i;
-
- printf("Board: %sQDS, ", cpu->name);
- printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
- QIXIS_READ(id), QIXIS_READ(arch));
-
- sw = QIXIS_READ(brdcfg[0]);
- sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
-
- if (sw < 0x8)
- printf("vBank: %d\n", sw);
- else if (sw == 0x8)
- puts("Promjet\n");
- else if (sw == 0x9)
- puts("NAND\n");
- else
- printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
-
- printf("FPGA: v%d (%s), build %d",
- (int)QIXIS_READ(scver), qixis_read_tag(buf),
- (int)qixis_read_minor());
- /* the timestamp string contains "\n"@the end */
- printf(" on %s", qixis_read_time(buf));
-
- /*
- * Display the actual SERDES reference clocks as configured by the
- * dip switches on the board. Note that the SWx registers could
- * technically be set to force the reference clocks to match the
- * values that the SERDES expects (or vice versa). For now, however,
- * we just display both values and hope the user notices when they
- * don't match.
- */
- puts("SERDES Reference Clocks: ");
- sw = QIXIS_READ(brdcfg[2]);
- for (i = 0; i < MAX_SERDES; i++) {
- static const char * const freq[] = {
- "100", "125", "156.25", "161.1328125"};
- unsigned int clock = (sw >> (6 - 2 * i)) & 3;
-
- printf("SERDES%u=%sMHz ", i+1, freq[clock]);
- }
- puts("\n");
-
- return 0;
-}
-
-int select_i2c_ch_pca9547(u8 ch, int bus_num)
-{
- int ret;
-
-#ifdef CONFIG_DM_I2C
- struct udevice *dev;
-
- ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
- 1, &dev);
- if (ret) {
- printf("%s: Cannot find udev for a bus %d\n", __func__,
- bus_num);
- return ret;
- }
-
- ret = dm_i2c_write(dev, 0, &ch, 1);
-#else
- ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
-#endif
- if (ret) {
- puts("PCA: failed to select proper channel\n");
- return ret;
- }
-
- return 0;
-}
-
-/*
- * read_voltage from sensor on I2C bus
- * We use average of 4 readings, waiting for 532us befor another reading
- */
-#define NUM_READINGS 4 /* prefer to be power of 2 for efficiency */
-#define WAIT_FOR_ADC 532 /* wait for 532 microseconds for ADC */
-
-static inline int read_voltage(void)
-{
- int i, ret, voltage_read = 0;
- u16 vol_mon;
-#ifdef CONFIG_DM_I2C
- struct udevice *dev;
- int bus_num = 0;
-#endif
-
- for (i = 0; i < NUM_READINGS; i++) {
-#ifdef CONFIG_DM_I2C
- ret = i2c_get_chip_for_busnum(bus_num, I2C_VOL_MONITOR_ADDR,
- 1, &dev);
- if (ret) {
- printf("%s: Cannot find udev for a bus %d\n", __func__,
- bus_num);
- return ret;
- }
-
- ret = dm_i2c_read(dev,
- I2C_VOL_MONITOR_BUS_V_OFFSET,
- (void *)&vol_mon, 2);
-#else
- ret = i2c_read(I2C_VOL_MONITOR_ADDR,
- I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2);
-#endif
- if (ret) {
- printf("VID: failed to read core voltage\n");
- return ret;
- }
- if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) {
- printf("VID: Core voltage sensor error\n");
- return -1;
- }
- debug("VID: bus voltage reads 0x%04x\n", vol_mon);
- /* LSB = 4mv */
- voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4;
- udelay(WAIT_FOR_ADC);
- }
- /* calculate the average */
- voltage_read /= NUM_READINGS;
-
- return voltage_read;
-}
-
-/*
- * We need to calculate how long before the voltage starts to drop or increase
- * It returns with the loop count. Each loop takes several readings (532us)
- */
-static inline int wait_for_voltage_change(int vdd_last)
-{
- int timeout, vdd_current;
-
- vdd_current = read_voltage();
- /* wait until voltage starts to drop */
- for (timeout = 0; abs(vdd_last - vdd_current) <= 4 &&
- timeout < 100; timeout++) {
- vdd_current = read_voltage();
- }
- if (timeout >= 100) {
- printf("VID: Voltage adjustment timeout\n");
- return -1;
- }
- return timeout;
-}
-
-/*
- * argument 'wait' is the time we know the voltage difference can be measured
- * this function keeps reading the voltage until it is stable
- */
-static inline int wait_for_voltage_stable(int wait)
-{
- int timeout, vdd_current, vdd_last;
-
- vdd_last = read_voltage();
- udelay(wait * NUM_READINGS * WAIT_FOR_ADC);
- /* wait until voltage is stable */
- vdd_current = read_voltage();
- for (timeout = 0; abs(vdd_last - vdd_current) >= 4 &&
- timeout < 100; timeout++) {
- vdd_last = vdd_current;
- udelay(wait * NUM_READINGS * WAIT_FOR_ADC);
- vdd_current = read_voltage();
- }
- if (timeout >= 100) {
- printf("VID: Voltage adjustment timeout\n");
- return -1;
- }
-
- return vdd_current;
-}
-
-static inline int set_voltage(u8 vid)
-{
- int wait, vdd_last;
-
- vdd_last = read_voltage();
- QIXIS_WRITE(brdcfg[6], vid);
- wait = wait_for_voltage_change(vdd_last);
- if (wait < 0)
- return -1;
- debug("VID: Waited %d us\n", wait * NUM_READINGS * WAIT_FOR_ADC);
- wait = wait ? wait : 1;
-
- vdd_last = wait_for_voltage_stable(wait);
- if (vdd_last < 0)
- return -1;
- debug("VID: Current voltage is %d mV\n", vdd_last);
-
- return vdd_last;
-}
-
-
-static int adjust_vdd(ulong vdd_override)
-{
- int re_enable = disable_interrupts();
- ccsr_gur_t __iomem *gur =
- (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 fusesr;
- u8 vid, vid_current;
- int vdd_target, vdd_current, vdd_last;
- int ret;
- unsigned long vdd_string_override;
- char *vdd_string;
- static const uint16_t vdd[32] = {
- 0, /* unused */
- 9875, /* 0.9875V */
- 9750,
- 9625,
- 9500,
- 9375,
- 9250,
- 9125,
- 9000,
- 8875,
- 8750,
- 8625,
- 8500,
- 8375,
- 8250,
- 8125,
- 10000, /* 1.0000V */
- 10125,
- 10250,
- 10375,
- 10500,
- 10625,
- 10750,
- 10875,
- 11000,
- 0, /* reserved */
- };
- struct vdd_drive {
- u8 vid;
- unsigned voltage;
- };
-
- ret = select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR, 0);
- if (ret) {
- debug("VID: I2c failed to switch channel\n");
- ret = -1;
- goto exit;
- }
-
- /* get the voltage ID from fuse status register */
- fusesr = in_be32(&gur->dcfg_fusesr);
- vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
- FSL_CORENET_DCFG_FUSESR_VID_MASK;
- if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) {
- vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
- FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
- }
- vdd_target = vdd[vid];
-
- /* check override variable for overriding VDD */
- vdd_string = env_get("t4240qds_vdd_mv");
- if (vdd_override == 0 && vdd_string &&
- !strict_strtoul(vdd_string, 10, &vdd_string_override))
- vdd_override = vdd_string_override;
- if (vdd_override >= 819 && vdd_override <= 1212) {
- vdd_target = vdd_override * 10; /* convert to 1/10 mV */
- debug("VDD override is %lu\n", vdd_override);
- } else if (vdd_override != 0) {
- printf("Invalid value.\n");
- }
-
- if (vdd_target == 0) {
- debug("VID: VID not used\n");
- ret = 0;
- goto exit;
- } else {
- /* round up and divice by 10 to get a value in mV */
- vdd_target = DIV_ROUND_UP(vdd_target, 10);
- debug("VID: vid = %d mV\n", vdd_target);
- }
-
- /*
- * Check current board VID setting
- * Voltage regulator support output to 6.250mv step
- * The highes voltage allowed for this board is (vid=0x40) 1.21250V
- * the lowest is (vid=0x7f) 0.81875V
- */
- vid_current = QIXIS_READ(brdcfg[6]);
- vdd_current = 121250 - (vid_current - 0x40) * 625;
- debug("VID: Current vid setting is (0x%x) %d mV\n",
- vid_current, vdd_current/100);
-
- /*
- * Read voltage monitor to check real voltage.
- * Voltage monitor LSB is 4mv.
- */
- vdd_last = read_voltage();
- if (vdd_last < 0) {
- printf("VID: Could not read voltage sensor abort VID adjustment\n");
- ret = -1;
- goto exit;
- }
- debug("VID: Core voltage is at %d mV\n", vdd_last);
- /*
- * Adjust voltage to@or 8mV above target.
- * Each step of adjustment is 6.25mV.
- * Stepping down too fast may cause over current.
- */
- while (vdd_last > 0 && vid_current < 0x80 &&
- vdd_last > (vdd_target + 8)) {
- vid_current++;
- vdd_last = set_voltage(vid_current);
- }
- /*
- * Check if we need to step up
- * This happens when board voltage switch was set too low
- */
- while (vdd_last > 0 && vid_current >= 0x40 &&
- vdd_last < vdd_target + 2) {
- vid_current--;
- vdd_last = set_voltage(vid_current);
- }
- if (vdd_last > 0)
- printf("VID: Core voltage %d mV\n", vdd_last);
- else
- ret = -1;
-
-exit:
- if (re_enable)
- enable_interrupts();
- return ret;
-}
-
-/* Configure Crossbar switches for Front-Side SerDes Ports */
-int config_frontside_crossbar_vsc3316(void)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 srds_prtcl_s1, srds_prtcl_s2;
- int ret;
-
- ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS, 0);
- if (ret)
- return ret;
-
- srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
- FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
- srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
- switch (srds_prtcl_s1) {
- case 37:
- case 38:
- /* swap first lane and third lane on slot1 */
- vsc3316_fsm1_tx[0][1] = 14;
- vsc3316_fsm1_tx[6][1] = 0;
- vsc3316_fsm1_rx[1][1] = 2;
- vsc3316_fsm1_rx[6][1] = 13;
- case 39:
- case 40:
- case 45:
- case 46:
- case 47:
- case 48:
- /* swap first lane and third lane on slot2 */
- vsc3316_fsm1_tx[2][1] = 8;
- vsc3316_fsm1_tx[4][1] = 6;
- vsc3316_fsm1_rx[2][1] = 10;
- vsc3316_fsm1_rx[5][1] = 5;
- default:
- ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8);
- if (ret)
- return ret;
- ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8);
- if (ret)
- return ret;
- break;
- }
-
- srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
- FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
- srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
- switch (srds_prtcl_s2) {
- case 37:
- case 38:
- /* swap first lane and third lane on slot3 */
- vsc3316_fsm2_tx[2][1] = 11;
- vsc3316_fsm2_tx[5][1] = 4;
- vsc3316_fsm2_rx[2][1] = 9;
- vsc3316_fsm2_rx[4][1] = 7;
- case 39:
- case 40:
- case 45:
- case 46:
- case 47:
- case 48:
- case 49:
- case 50:
- case 51:
- case 52:
- case 53:
- case 54:
- /* swap first lane and third lane on slot4 */
- vsc3316_fsm2_tx[6][1] = 3;
- vsc3316_fsm2_tx[1][1] = 12;
- vsc3316_fsm2_rx[0][1] = 1;
- vsc3316_fsm2_rx[6][1] = 15;
- default:
- ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8);
- if (ret)
- return ret;
- ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8);
- if (ret)
- return ret;
- break;
- }
-
- return 0;
-}
-
-int config_backside_crossbar_mux(void)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 srds_prtcl_s3, srds_prtcl_s4;
- u8 brdcfg;
-
- srds_prtcl_s3 = in_be32(&gur->rcwsr[4]) &
- FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
- srds_prtcl_s3 >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
- switch (srds_prtcl_s3) {
- case 0:
- /* SerDes3 is not enabled */
- break;
- case 1:
- case 2:
- case 9:
- case 10:
- /* SD3(0:7) => SLOT5(0:7) */
- brdcfg = QIXIS_READ(brdcfg[12]);
- brdcfg &= ~BRDCFG12_SD3MX_MASK;
- brdcfg |= BRDCFG12_SD3MX_SLOT5;
- QIXIS_WRITE(brdcfg[12], brdcfg);
- break;
- case 3:
- case 4:
- case 5:
- case 6:
- case 7:
- case 8:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- case 16:
- case 17:
- case 18:
- case 19:
- case 20:
- /* SD3(4:7) => SLOT6(0:3) */
- brdcfg = QIXIS_READ(brdcfg[12]);
- brdcfg &= ~BRDCFG12_SD3MX_MASK;
- brdcfg |= BRDCFG12_SD3MX_SLOT6;
- QIXIS_WRITE(brdcfg[12], brdcfg);
- break;
- default:
- printf("WARNING: unsupported for SerDes3 Protocol %d\n",
- srds_prtcl_s3);
- return -1;
- }
-
- srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) &
- FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
- srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
- switch (srds_prtcl_s4) {
- case 0:
- /* SerDes4 is not enabled */
- break;
- case 1:
- case 2:
- /* 10b, SD4(0:7) => SLOT7(0:7) */
- brdcfg = QIXIS_READ(brdcfg[12]);
- brdcfg &= ~BRDCFG12_SD4MX_MASK;
- brdcfg |= BRDCFG12_SD4MX_SLOT7;
- QIXIS_WRITE(brdcfg[12], brdcfg);
- break;
- case 3:
- case 4:
- case 5:
- case 6:
- case 7:
- case 8:
- /* x1b, SD4(4:7) => SLOT8(0:3) */
- brdcfg = QIXIS_READ(brdcfg[12]);
- brdcfg &= ~BRDCFG12_SD4MX_MASK;
- brdcfg |= BRDCFG12_SD4MX_SLOT8;
- QIXIS_WRITE(brdcfg[12], brdcfg);
- break;
- case 9:
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- case 16:
- case 18:
- /* 00b, SD4(4:5) => AURORA, SD4(6:7) => SATA */
- brdcfg = QIXIS_READ(brdcfg[12]);
- brdcfg &= ~BRDCFG12_SD4MX_MASK;
- brdcfg |= BRDCFG12_SD4MX_AURO_SATA;
- QIXIS_WRITE(brdcfg[12], brdcfg);
- break;
- default:
- printf("WARNING: unsupported for SerDes4 Protocol %d\n",
- srds_prtcl_s4);
- return -1;
- }
-
- return 0;
-}
-
-int board_early_init_r(void)
-{
- const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
- /*
- * Remap Boot flash + PROMJET region to caching-inhibited
- * so that flash can be erased properly.
- */
-
- /* Flush d-cache and invalidate i-cache of any FLASH data */
- flush_dcache();
- invalidate_icache();
-
- if (flash_esel == -1) {
- /* very unlikely unless something is messed up */
- puts("Error: Could not find TLB for FLASH BASE\n");
- flash_esel = 2; /* give our best effort to continue */
- } else {
- /* invalidate existing TLB entry for flash + promjet */
- disable_tlb(flash_esel);
- }
-
- set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
- /* Disable remote I2C connection to qixis fpga */
- QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
-
- /*
- * Adjust core voltage according to voltage ID
- * This function changes I2C mux to channel 2.
- */
- if (adjust_vdd(0))
- printf("Warning: Adjusting core voltage failed.\n");
-
- /* Configure board SERDES ports crossbar */
- config_frontside_crossbar_vsc3316();
- config_backside_crossbar_mux();
- select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
-
- return 0;
-}
-
-unsigned long get_board_sys_clk(void)
-{
- u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
-#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
- /* use accurate clock measurement */
- int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]);
- int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
- u32 val;
-
- val = freq * base;
- if (val) {
- debug("SYS Clock measurement is: %d\n", val);
- return val;
- } else {
- printf("Warning: SYS clock measurement is invalid, using value from brdcfg1.\n");
- }
-#endif
-
- switch (sysclk_conf & 0x0F) {
- case QIXIS_SYSCLK_83:
- return 83333333;
- case QIXIS_SYSCLK_100:
- return 100000000;
- case QIXIS_SYSCLK_125:
- return 125000000;
- case QIXIS_SYSCLK_133:
- return 133333333;
- case QIXIS_SYSCLK_150:
- return 150000000;
- case QIXIS_SYSCLK_160:
- return 160000000;
- case QIXIS_SYSCLK_166:
- return 166666666;
- }
- return 66666666;
-}
-
-unsigned long get_board_ddr_clk(void)
-{
- u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
-#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
- /* use accurate clock measurement */
- int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]);
- int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
- u32 val;
-
- val = freq * base;
- if (val) {
- debug("DDR Clock measurement is: %d\n", val);
- return val;
- } else {
- printf("Warning: DDR clock measurement is invalid, using value from brdcfg1.\n");
- }
-#endif
-
- switch ((ddrclk_conf & 0x30) >> 4) {
- case QIXIS_DDRCLK_100:
- return 100000000;
- case QIXIS_DDRCLK_125:
- return 125000000;
- case QIXIS_DDRCLK_133:
- return 133333333;
- }
- return 66666666;
-}
-
-int misc_init_r(void)
-{
- u8 sw;
- void *srds_base = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
- serdes_corenet_t *srds_regs;
- u32 actual[MAX_SERDES];
- u32 pllcr0, expected;
- unsigned int i;
-
- sw = QIXIS_READ(brdcfg[2]);
- for (i = 0; i < MAX_SERDES; i++) {
- unsigned int clock = (sw >> (6 - 2 * i)) & 3;
- switch (clock) {
- case 0:
- actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
- break;
- case 1:
- actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
- break;
- case 2:
- actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
- break;
- case 3:
- actual[i] = SRDS_PLLCR0_RFCK_SEL_161_13;
- break;
- }
- }
-
- for (i = 0; i < MAX_SERDES; i++) {
- srds_regs = srds_base + i * 0x1000;
- pllcr0 = srds_regs->bank[0].pllcr0;
- expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
- if (expected != actual[i]) {
- printf("Warning: SERDES%u expects reference clock %sMHz, but actual is %sMHz\n",
- i + 1, serdes_clock_to_string(expected),
- serdes_clock_to_string(actual[i]));
- }
- }
-
- return 0;
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
- phys_addr_t base;
- phys_size_t size;
-
- ft_cpu_setup(blob, bd);
-
- base = env_get_bootm_low();
- size = env_get_bootm_size();
-
- fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_PCI
- pci_of_setup(blob, bd);
-#endif
-
- fdt_fixup_liodn(blob);
- fsl_fdt_fixup_dr_usb(blob, bd);
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-#ifndef CONFIG_DM_ETH
- fdt_fixup_fman_ethernet(blob);
-#endif
- fdt_fixup_board_enet(blob);
-#endif
-
- return 0;
-}
-
-/*
- * This function is called by bdinfo to print detail board information.
- * As an exmaple for future board, we organize the messages into
- * several sections. If applicable, the message is in the format of
- * <name> = <value>
- * It should aligned with normal output of bdinfo command.
- *
- * Voltage: Core, DDR and another configurable voltages
- * Clock : Critical clocks which are not printed already
- * RCW : RCW source if not printed already
- * Misc : Other important information not in above catagories
- */
-void board_detail(void)
-{
- int i;
- u8 brdcfg[16], dutcfg[16], rst_ctl;
- int vdd, rcwsrc;
- static const char * const clk[] = {"66.67", "100", "125", "133.33"};
-
- for (i = 0; i < 16; i++) {
- brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
- dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
- }
-
- /* Voltage secion */
- if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR, 0)) {
- vdd = read_voltage();
- if (vdd > 0)
- printf("Core voltage= %d mV\n", vdd);
- select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
- }
-
- printf("XVDD = 1.%d V\n", ((brdcfg[8] & 0xf) - 4) * 5 + 25);
-
- /* clock section */
- printf("SYSCLK = %s MHz\nDDRCLK = %s MHz\n",
- clk[(brdcfg[11] >> 2) & 0x3], clk[brdcfg[11] & 3]);
-
- /* RCW section */
- rcwsrc = (dutcfg[0] << 1) + (dutcfg[1] & 1);
- puts("RCW source = ");
- switch (rcwsrc) {
- case 0x017:
- case 0x01f:
- puts("8-bit NOR\n");
- break;
- case 0x027:
- case 0x02F:
- puts("16-bit NOR\n");
- break;
- case 0x040:
- puts("SDHC/eMMC\n");
- break;
- case 0x044:
- puts("SPI 16-bit addressing\n");
- break;
- case 0x045:
- puts("SPI 24-bit addressing\n");
- break;
- case 0x048:
- puts("I2C normal addressing\n");
- break;
- case 0x049:
- puts("I2C extended addressing\n");
- break;
- case 0x108:
- case 0x109:
- case 0x10a:
- case 0x10b:
- puts("8-bit NAND, 2KB\n");
- break;
- default:
- if ((rcwsrc >= 0x080) && (rcwsrc <= 0x09f))
- puts("Hard-coded RCW\n");
- else if ((rcwsrc >= 0x110) && (rcwsrc <= 0x11f))
- puts("8-bit NAND, 4KB\n");
- else
- puts("unknown\n");
- break;
- }
-
- /* Misc section */
- rst_ctl = QIXIS_READ(rst_ctl);
- puts("HRESET_REQ = ");
- switch (rst_ctl & 0x30) {
- case 0x00:
- puts("Ignored\n");
- break;
- case 0x10:
- puts("Assert HRESET\n");
- break;
- case 0x30:
- puts("Reset system\n");
- break;
- default:
- puts("N/A\n");
- break;
- }
-}
-
-/*
- * Reverse engineering switch settings.
- * Some bits cannot be figured out. They will be displayed as
- * underscore in binary format. mask[] has those bits.
- * Some bits are calculated differently than the actual switches
- * if booting with overriding by FPGA.
- */
-void qixis_dump_switch(void)
-{
- int i;
- u8 sw[9];
-
- /*
- * Any bit with 1 means that bit cannot be reverse engineered.
- * It will be displayed as _ in binary format.
- */
- static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xcf, 0x3f, 0x1f};
- char buf[10];
- u8 brdcfg[16], dutcfg[16];
-
- for (i = 0; i < 16; i++) {
- brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
- dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
- }
-
- sw[0] = dutcfg[0];
- sw[1] = (dutcfg[1] << 0x07) |
- ((dutcfg[12] & 0xC0) >> 1) |
- ((dutcfg[11] & 0xE0) >> 3) |
- ((dutcfg[6] & 0x80) >> 6) |
- ((dutcfg[1] & 0x80) >> 7);
- sw[2] = ((brdcfg[1] & 0x0f) << 4) |
- ((brdcfg[1] & 0x30) >> 2) |
- ((brdcfg[1] & 0x40) >> 5) |
- ((brdcfg[1] & 0x80) >> 7);
- sw[3] = brdcfg[2];
- sw[4] = ((dutcfg[2] & 0x01) << 7) |
- ((dutcfg[2] & 0x06) << 4) |
- ((~QIXIS_READ(present)) & 0x10) |
- ((brdcfg[3] & 0x80) >> 4) |
- ((brdcfg[3] & 0x01) << 2) |
- ((brdcfg[6] == 0x62) ? 3 :
- ((brdcfg[6] == 0x5a) ? 2 :
- ((brdcfg[6] == 0x5e) ? 1 : 0)));
- sw[5] = ((brdcfg[0] & 0x0f) << 4) |
- ((QIXIS_READ(rst_ctl) & 0x30) >> 2) |
- ((brdcfg[0] & 0x40) >> 5);
- sw[6] = (brdcfg[11] & 0x20) |
- ((brdcfg[5] & 0x02) << 3);
- sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) |
- ((brdcfg[5] & 0x10) << 2);
- sw[8] = ((brdcfg[12] & 0x08) << 4) |
- ((brdcfg[12] & 0x03) << 5);
-
- puts("DIP switch (reverse-engineering)\n");
- for (i = 0; i < 9; i++) {
- printf("SW%d = 0b%s (0x%02x)\n",
- i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
- }
-}
-
-static int do_vdd_adjust(struct cmd_tbl *cmdtp,
- int flag, int argc,
- char *const argv[])
-{
- ulong override;
-
- if (argc < 2)
- return CMD_RET_USAGE;
- if (!strict_strtoul(argv[1], 10, &override))
- adjust_vdd(override); /* the value is checked by callee */
- else
- return CMD_RET_USAGE;
-
- return 0;
-}
-
-U_BOOT_CMD(
- vdd_override, 2, 0, do_vdd_adjust,
- "Override VDD",
- "- override with the voltage specified in mV, eg. 1050"
-);
diff --git a/board/freescale/t4qds/t4240qds_qixis.h b/board/freescale/t4qds/t4240qds_qixis.h
deleted file mode 100644
index 52e8d5a7be..0000000000
--- a/board/freescale/t4qds/t4240qds_qixis.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- */
-
-#ifndef __T4020QDS_QIXIS_H__
-#define __T4020QDS_QIXIS_H__
-
-/* Definitions of QIXIS Registers for T4020QDS */
-
-/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
-#define BRDCFG4_EMISEL_MASK 0xE0
-#define BRDCFG4_EMISEL_SHIFT 5
-
-/* SYSCLK */
-#define QIXIS_SYSCLK_66 0x0
-#define QIXIS_SYSCLK_83 0x1
-#define QIXIS_SYSCLK_100 0x2
-#define QIXIS_SYSCLK_125 0x3
-#define QIXIS_SYSCLK_133 0x4
-#define QIXIS_SYSCLK_150 0x5
-#define QIXIS_SYSCLK_160 0x6
-#define QIXIS_SYSCLK_166 0x7
-
-/* DDRCLK */
-#define QIXIS_DDRCLK_66 0x0
-#define QIXIS_DDRCLK_100 0x1
-#define QIXIS_DDRCLK_125 0x2
-#define QIXIS_DDRCLK_133 0x3
-
-#define BRDCFG5_IRE 0x20 /* i2c Remote i2c1 enable */
-
-#define BRDCFG12_SD3EN_MASK 0x20
-#define BRDCFG12_SD3MX_MASK 0x08
-#define BRDCFG12_SD3MX_SLOT5 0x08
-#define BRDCFG12_SD3MX_SLOT6 0x00
-#define BRDCFG12_SD4EN_MASK 0x04
-#define BRDCFG12_SD4MX_MASK 0x03
-#define BRDCFG12_SD4MX_SLOT7 0x02
-#define BRDCFG12_SD4MX_SLOT8 0x01
-#define BRDCFG12_SD4MX_AURO_SATA 0x00
-#endif
diff --git a/board/freescale/t4qds/t4_nand_rcw.cfg b/board/freescale/t4qds/t4_nand_rcw.cfg
deleted file mode 100644
index 9386be0faa..0000000000
--- a/board/freescale/t4qds/t4_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-#serdes protocol 1_27_5_11
-1607001b 18101b16 00000000 00000000
-04362858 30548c00 e8020000 f5000000
-00000000 ee0000ee 00000000 000307fc
-00000000 00000000 00000000 00000028
diff --git a/board/freescale/t4qds/t4_pbi.cfg b/board/freescale/t4qds/t4_pbi.cfg
deleted file mode 100644
index 8d460039bf..0000000000
--- a/board/freescale/t4qds/t4_pbi.cfg
+++ /dev/null
@@ -1,21 +0,0 @@
-#PBI commands
-#Initialize CPC1
-09010000 00200400
-09138000 00000000
-091380c0 00000100
-#512KB SRAM
-09010100 00000000
-09010104 fff80009
-09010f00 08000000
-#enable CPC1
-09010000 80000000
-#Configure LAW for CPC1
-09000d00 00000000
-09000d04 fff80000
-09000d08 81000012
-#Configure alternate space
-09000010 00000000
-09000014 ff000000
-09000018 81000000
-#Flush PBL data
-091380c0 00100000
diff --git a/board/freescale/t4qds/t4_sd_rcw.cfg b/board/freescale/t4qds/t4_sd_rcw.cfg
deleted file mode 100644
index 54beb6783d..0000000000
--- a/board/freescale/t4qds/t4_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-#serdes protocol 1_27_5_11
-1607001b 18101b16 00000000 00000000
-04362858 30548c00 68020000 f5000000
-00000000 ee0000ee 00000000 000307fc
-00000000 00000000 00000000 00000028
diff --git a/board/freescale/t4qds/t4qds.h b/board/freescale/t4qds/t4qds.h
deleted file mode 100644
index 4a8e91b58f..0000000000
--- a/board/freescale/t4qds/t4qds.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2011-2012 Freescale Semiconductor, Inc.
- */
-
-#ifndef __CORENET_DS_H__
-#define __CORENET_DS_H__
-
-void fdt_fixup_board_enet(void *blob);
-void pci_of_setup(void *blob, bd_t *bd);
-
-#endif
diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c
deleted file mode 100644
index cd5cf48def..0000000000
--- a/board/freescale/t4qds/tlb.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
- /* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
- /* TLB 1 */
- /* *I*** - Covers boot page */
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
- /*
- * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
- * SRAM is at 0xfff00000, it covered the 0xfffff000.
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_1M, 1),
-#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
- /*
- * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the
- * space is at 0xfff00000, it covered the 0xfffff000.
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR,
- CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
- 0, 0, BOOKE_PAGESZ_1M, 1),
-#else
- SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_4K, 1),
-#endif
-
- /* *I*G* - CCSRBAR */
- SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 1, BOOKE_PAGESZ_16M, 1),
-
- /* *I*G* - Flash, localbus */
- /* This will be changed to *I*G* after relocation to RAM. */
- SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
-#ifndef CONFIG_SPL_BUILD
- /* *I*G* - PCI */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 3, BOOKE_PAGESZ_1G, 1),
-
- /* *I*G* - PCI */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000,
- CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000,
- CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-
- /* *I*G* - PCI I/O */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 6, BOOKE_PAGESZ_256K, 1),
-
- /* Bman/Qman */
-#ifdef CONFIG_SYS_BMAN_MEM_PHYS
- SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 9, BOOKE_PAGESZ_16M, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
- CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 10, BOOKE_PAGESZ_16M, 1),
-#endif
-#ifdef CONFIG_SYS_QMAN_MEM_PHYS
- SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 11, BOOKE_PAGESZ_16M, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
- CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 12, BOOKE_PAGESZ_16M, 1),
-#endif
-#endif
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 13, BOOKE_PAGESZ_32M, 1),
-#endif
-#ifdef CONFIG_SYS_NAND_BASE
- /*
- * *I*G - NAND
- * entry 14 and 15 has been used hard coded, they will be disabled
- * in cpu_init_f, so we use entry 16 for nand.
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 16, BOOKE_PAGESZ_64K, 1),
-#endif
-#ifdef QIXIS_BASE_PHYS
- SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 17, BOOKE_PAGESZ_4K, 1),
-#endif
-#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
- /*
- * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for
- * fetching ucode and ENV from master
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR,
- CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
- 0, 18, BOOKE_PAGESZ_1M, 1),
-#endif
-
-#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
- 0, 19, BOOKE_PAGESZ_2G, 1)
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/T4160QDS_NAND_defconfig b/configs/T4160QDS_NAND_defconfig
deleted file mode 100644
index ddff89602f..0000000000
--- a/configs/T4160QDS_NAND_defconfig
+++ /dev/null
@@ -1,69 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x140000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4160QDS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T4160QDS_SDCARD_defconfig b/configs/T4160QDS_SDCARD_defconfig
deleted file mode 100644
index 5d253534ca..0000000000
--- a/configs/T4160QDS_SDCARD_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4160QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T4160QDS_SECURE_BOOT_defconfig b/configs/T4160QDS_SECURE_BOOT_defconfig
deleted file mode 100644
index 8934c3edf0..0000000000
--- a/configs/T4160QDS_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4160QDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T4160QDS_defconfig b/configs/T4160QDS_defconfig
deleted file mode 100644
index d0d1290631..0000000000
--- a/configs/T4160QDS_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4160QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T4240QDS_NAND_defconfig b/configs/T4240QDS_NAND_defconfig
deleted file mode 100644
index f971cee3b0..0000000000
--- a/configs/T4240QDS_NAND_defconfig
+++ /dev/null
@@ -1,69 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x140000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4240QDS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T4240QDS_SDCARD_defconfig b/configs/T4240QDS_SDCARD_defconfig
deleted file mode 100644
index 5e662be1d7..0000000000
--- a/configs/T4240QDS_SDCARD_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4240QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T4240QDS_SECURE_BOOT_defconfig b/configs/T4240QDS_SECURE_BOOT_defconfig
deleted file mode 100644
index 807d5b5895..0000000000
--- a/configs/T4240QDS_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4240QDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig b/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig
deleted file mode 100644
index 2bc30bbf9e..0000000000
--- a/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig
+++ /dev/null
@@ -1,49 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4240QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_GREPENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_REMOTE=y
-CONFIG_ENV_ADDR=0xFFE20000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T4240QDS_defconfig b/configs/T4240QDS_defconfig
deleted file mode 100644
index 84341f7579..0000000000
--- a/configs/T4240QDS_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4240QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h
deleted file mode 100644
index d92af7202b..0000000000
--- a/include/configs/T4240QDS.h
+++ /dev/null
@@ -1,555 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2011-2012 Freescale Semiconductor, Inc.
- */
-
-/*
- * T4240 QDS board configuration file
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-#define CONFIG_FSL_SATA_V2
-#define CONFIG_PCIE4
-
-#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
-
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg
-#if !defined(CONFIG_MTD_RAW_NAND) && !defined(CONFIG_SDCARD)
-#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
-#else
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_PAD_TO 0x40000
-#define CONFIG_SPL_MAX_SIZE 0x28000
-#define RESET_VECTOR_OFFSET 0x27FFC
-#define BOOT_PAGE_OFFSET 0x27000
-
-#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000
-#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_nand_rcw.cfg
-#endif
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC
-#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000
-#define CONFIG_SYS_MMC_U_BOOT_START 0x00200000
-#define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10)
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#endif
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_sd_rcw.cfg
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_SKIP_RELOCATE
-#define CONFIG_SPL_COMMON_INIT_DDR
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
-
-#endif
-#endif /* CONFIG_RAMBOOT_PBL */
-
-#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
-/* Set 1M boot space */
-#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
-#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
- (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
-#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
-#endif
-
-#define CONFIG_SRIO_PCIE_BOOT_MASTER
-#define CONFIG_DDR_ECC
-
-#include "t4qds.h"
-
-#if defined(CONFIG_SPIFLASH)
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#endif
-
-#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
-#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
-
-#ifndef __ASSEMBLY__
-unsigned long get_board_sys_clk(void);
-unsigned long get_board_ddr_clk(void);
-#endif
-
-/* EEPROM */
-#define CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM 0
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_SPD_BUS_NUM 0
-#define SPD_EEPROM_ADDRESS1 0x51
-#define SPD_EEPROM_ADDRESS2 0x52
-#define SPD_EEPROM_ADDRESS3 0x53
-#define SPD_EEPROM_ADDRESS4 0x54
-#define SPD_EEPROM_ADDRESS5 0x55
-#define SPD_EEPROM_ADDRESS6 0x56
-#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */
-#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
-
-/*
- * IFC Definitions
- */
-#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
-#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
- + 0x8000000) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR1_CSPR_EXT (0xf)
-#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
-/* NOR Flash Timing Params */
-#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
-
-#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
- FTIM0_NOR_TEADC(0x5) | \
- FTIM0_NOR_TEAHC(0x5))
-#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
- FTIM1_NOR_TRAD_NOR(0x1A) |\
- FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
- FTIM2_NOR_TCH(0x4) | \
- FTIM2_NOR_TWPH(0x0E) | \
- FTIM2_NOR_TWP(0x1c))
-#define CONFIG_SYS_NOR_FTIM3 0x0
-
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \
- + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
-
-#define CONFIG_FSL_QIXIS /* use common QIXIS code */
-#define QIXIS_BASE 0xffdf0000
-#define QIXIS_LBMAP_SWITCH 6
-#define QIXIS_LBMAP_MASK 0x0f
-#define QIXIS_LBMAP_SHIFT 0
-#define QIXIS_LBMAP_DFLTBANK 0x00
-#define QIXIS_LBMAP_ALTBANK 0x04
-#define QIXIS_RST_CTL_RESET 0x83
-#define QIXIS_RST_FORCE_MEM 0x1
-#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
-#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
-#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
-#define QIXIS_BRDCFG5 0x55
-#define QIXIS_MUX_SDHC 2
-#define QIXIS_MUX_SDHC_WIDTH8 1
-#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE)
-
-#define CONFIG_SYS_CSPR3_EXT (0xf)
-#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
- | CSPR_PORT_SIZE_8 \
- | CSPR_MSEL_GPCM \
- | CSPR_V)
-#define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024)
-#define CONFIG_SYS_CSOR3 0x0
-/* QIXIS Timing parameters for IFC CS3 */
-#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
- FTIM0_GPCM_TEADC(0x0e) | \
- FTIM0_GPCM_TEAHC(0x0e))
-#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
- FTIM1_GPCM_TRAD(0x3f))
-#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
- FTIM2_GPCM_TCH(0x8) | \
- FTIM2_GPCM_TWP(0x1f))
-#define CONFIG_SYS_CS3_FTIM3 0x0
-
-/* NAND Flash on IFC */
-#define CONFIG_NAND_FSL_IFC
-#define CONFIG_SYS_NAND_BASE 0xff800000
-#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
-
-#define CONFIG_SYS_NAND_CSPR_EXT (0xf)
-#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
- | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
- | CSPR_MSEL_NAND /* MSEL = NAND */ \
- | CSPR_V)
-#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
-
-#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
- | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
- | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
- | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \
- | CSOR_NAND_PGS_2K /* Page Size = 2K */ \
- | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
- | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
-
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/* ONFI NAND Flash mode0 Timing Params */
-#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
- FTIM0_NAND_TWP(0x18) | \
- FTIM0_NAND_TWCHT(0x07) | \
- FTIM0_NAND_TWH(0x0a))
-#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
- FTIM1_NAND_TWBE(0x39) | \
- FTIM1_NAND_TRR(0x0e) | \
- FTIM1_NAND_TRP(0x18))
-#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
- FTIM2_NAND_TREH(0x0a) | \
- FTIM2_NAND_TWHRE(0x1e))
-#define CONFIG_SYS_NAND_FTIM3 0x0
-
-#define CONFIG_SYS_NAND_DDR_LAW 11
-
-#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
-#define CONFIG_SYS_NAND_MAX_OOBFREE 2
-#define CONFIG_SYS_NAND_MAX_ECCPOS 256
-
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
-#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
-#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT
-#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR
-#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
-#else
-#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT
-#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR
-#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
-#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
-#endif
-
-#if defined(CONFIG_RAMBOOT_PBL)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-/* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#else
-#undef CONFIG_SYS_I2C
-#undef CONFIG_SYS_FSL_I2C2_OFFSET
-#undef CONFIG_SYS_FSL_I2C2_SLAVE
-#undef CONFIG_SYS_FSL_I2C2_SPEED
-#undef CONFIG_SYS_FSL_I2C_SLAVE
-#undef CONFIG_SYS_FSL_I2C_SPEED
-#undef CONFIG_SYS_FSL_I2C_OFFSET
-#endif
-
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */
-#define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */
-#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */
-#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */
-
-#define I2C_MUX_CH_DEFAULT 0x8
-#define I2C_MUX_CH_VOL_MONITOR 0xa
-#define I2C_MUX_CH_VSC3316_FS 0xc
-#define I2C_MUX_CH_VSC3316_BS 0xd
-
-/* Voltage monitor on channel 2*/
-#define I2C_VOL_MONITOR_ADDR 0x40
-#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
-#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
-#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
-
-/* VSC Crossbar switches */
-#define CONFIG_VSC_CROSSBAR
-#define VSC3316_FSM_TX_ADDR 0x70
-#define VSC3316_FSM_RX_ADDR 0x71
-
-/*
- * RapidIO
- */
-
-/*
- * for slave u-boot IMAGE instored in master memory space,
- * PHYS must be aligned based on the SIZE
- */
-#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
-#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
-#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */
-#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
-/*
- * for slave UCODE and ENV instored in master memory space,
- * PHYS must be aligned based on the SIZE
- */
-#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
-#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
-#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
-
-/* slave core release by master*/
-#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
-#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
-
-/*
- * SRIO_PCIE_BOOT - SLAVE
- */
-#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
-#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
-#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
- (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
-#endif
-/*
- * eSPI - Enhanced SPI
- */
-
-/* Qman/Bman */
-#ifndef CONFIG_NOBQFMAN
-#define CONFIG_SYS_BMAN_NUM_PORTALS 50
-#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
-#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
-#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
-#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
- CONFIG_SYS_BMAN_CENA_SIZE)
-#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
-#define CONFIG_SYS_QMAN_NUM_PORTALS 50
-#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
-#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
-#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
- CONFIG_SYS_QMAN_CENA_SIZE)
-#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
-#define CONFIG_SYS_DPAA_FMAN
-#define CONFIG_SYS_DPAA_PME
-#define CONFIG_SYS_PMAN
-#define CONFIG_SYS_DPAA_DCE
-#define CONFIG_SYS_DPAA_RMAN
-#define CONFIG_SYS_INTERLAKEN
-
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-/*
- * Slave has no ucode locally, it can fetch this from remote. When implementing
- * in two corenet boards, slave's ucode could be stored in master's memory
- * space, the address can be mapped from slave TLB->slave LAW->
- * slave SRIO or PCIE outbound window->master inbound window->
- * master LAW->the ucode address in master's memory space.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
-#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-#endif /* CONFIG_NOBQFMAN */
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
-#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
-#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
-#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
-#define FM1_10GEC1_PHY_ADDR 0x0
-#define FM1_10GEC2_PHY_ADDR 0x1
-#define FM2_10GEC1_PHY_ADDR 0x2
-#define FM2_10GEC2_PHY_ADDR 0x3
-#endif
-
-/* SATA */
-#ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE 2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
-#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
-
-#define CONFIG_LBA48
-#endif
-
-#ifdef CONFIG_FMAN_ENET
-#define CONFIG_ETHPRIME "FM1 at DTSEC1"
-#endif
-
-/*
-* USB
-*/
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_HAS_FSL_DR_USB
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_ESDHC_DETECT_QUIRK \
- (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \
- IS_SVR_REV(get_svr(), 1, 0))
-#define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \
- (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8))
-#endif
-
-
-#define __USB_PHY_TYPE utmi
-
-/*
- * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
- * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
- * interleaving. It can be cacheline, page, bank, superbank.
- * See doc/README.fsl-ddr for details.
- */
-#ifdef CONFIG_ARCH_T4240
-#define CTRL_INTLV_PREFERED 3way_4KB
-#else
-#define CTRL_INTLV_PREFERED cacheline
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:" \
- "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
- "bank_intlv=auto;" \
- "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
- "netdev=eth0\0" \
- "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
- "tftpflash=tftpboot $loadaddr $uboot && " \
- "protect off $ubootaddr +$filesize && " \
- "erase $ubootaddr +$filesize && " \
- "cp.b $loadaddr $ubootaddr $filesize && " \
- "protect on $ubootaddr +$filesize && " \
- "cmp.b $loadaddr $ubootaddr $filesize\0" \
- "consoledev=ttyS0\0" \
- "ramdiskaddr=2000000\0" \
- "ramdiskfile=t4240qds/ramdisk.uboot\0" \
- "fdtaddr=1e00000\0" \
- "fdtfile=t4240qds/t4240qds.dtb\0" \
- "bdev=sda3\0"
-
-#define CONFIG_HVBOOT \
- "setenv bootargs config-addr=0x60000000; " \
- "bootm 0x01000000 - 0x00f00000"
-
-#define CONFIG_ALU \
- "setenv bootargs root=/dev/$bdev rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "cpu 1 release 0x01000000 - - -;" \
- "cpu 2 release 0x01000000 - - -;" \
- "cpu 3 release 0x01000000 - - -;" \
- "cpu 4 release 0x01000000 - - -;" \
- "cpu 5 release 0x01000000 - - -;" \
- "cpu 6 release 0x01000000 - - -;" \
- "cpu 7 release 0x01000000 - - -;" \
- "go 0x01000000"
-
-#define CONFIG_LINUX \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "setenv ramdiskaddr 0x02000000;" \
- "setenv fdtaddr 0x00c00000;" \
- "setenv loadaddr 0x1000000;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_HDBOOT \
- "setenv bootargs root=/dev/$bdev rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_LINUX
-
-#include <asm/fsl_secure_boot.h>
-
-#endif /* __CONFIG_H */
--
2.25.1
next prev parent reply other threads:[~2020-06-13 12:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-13 12:20 [PATCH v2 00/10] spi: dm-conversion (part2) Jagan Teki
2020-06-13 12:20 ` [PATCH v2 01/10] powerpc: Remove configs/B4420QDS_NAND_defconfig board Jagan Teki
2020-06-13 12:21 ` [PATCH v2 02/10] powerpc: Remove configs/BSC9131RDB_NAND_SYSCLK100_defconfig board Jagan Teki
2020-06-13 12:21 ` [PATCH v2 03/10] powerpc: Remove configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig board Jagan Teki
2020-06-13 12:21 ` [PATCH v2 04/10] powerpc: Remove configs/C29XPCIE_NAND_defconfig board Jagan Teki
2020-06-13 12:21 ` [PATCH v2 05/10] powerpc: Remove configs/MPC8536DS_36BIT_defconfig board Jagan Teki
2020-06-13 12:21 ` [PATCH v2 06/10] powerpc: Remove P1022DS_36BIT_NAND_defconfig board Jagan Teki
2020-06-13 12:21 ` [PATCH v2 07/10] powerpc: Remove T1024QDS_DDR4_SECURE_BOOT_defconfig board Jagan Teki
2020-06-13 12:21 ` [PATCH v2 08/10] powerpc: Remove T1040QDS_DDR4_defconfig board Jagan Teki
2020-06-13 12:21 ` Jagan Teki [this message]
2020-06-13 12:21 ` [PATCH v2 10/10] powerpc: Remove TWR-P1025_defconfig board Jagan Teki
2020-06-18 16:18 ` [PATCH v2 00/10] spi: dm-conversion (part2) Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200613122108.87686-10-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.