From: Jarkko Nikula <jarkko.nikula@linux.intel.com>
To: linux-i2c@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.com>, Wolfram Sang <wsa@kernel.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Jarkko Nikula <jarkko.nikula@linux.intel.com>
Subject: [PATCH 1/2] i2c: i801: Add support for Intel Emmitsburg PCH
Date: Thu, 18 Jun 2020 16:42:39 +0300 [thread overview]
Message-ID: <20200618134240.4091271-1-jarkko.nikula@linux.intel.com> (raw)
From: Mika Westerberg <mika.westerberg@linux.intel.com>
Add support for SMBus controller on Intel Emmitsburg PCH. This is the
same IP as used in Cannon Lake and derivatives.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
---
Documentation/i2c/busses/i2c-i801.rst | 1 +
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-i801.c | 4 ++++
3 files changed, 6 insertions(+)
diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst
index b83da0e94184..faf32330c335 100644
--- a/Documentation/i2c/busses/i2c-i801.rst
+++ b/Documentation/i2c/busses/i2c-i801.rst
@@ -43,6 +43,7 @@ Supported adapters:
* Intel Elkhart Lake (PCH)
* Intel Tiger Lake (PCH)
* Intel Jasper Lake (SOC)
+ * Intel Emmitsburg (PCH)
Datasheets: Publicly available at the Intel website
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 735bf31a3fdf..085ca9b009ed 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -146,6 +146,7 @@ config I2C_I801
Elkhart Lake (PCH)
Tiger Lake (PCH)
Jasper Lake (SOC)
+ Emmitsburg (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index fea644921a76..7797ef1d25d9 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -54,6 +54,7 @@
* Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
* DNV (SOC) 0x19df 32 hard yes yes yes
+ * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes
* Broxton (SOC) 0x5ad4 32 hard yes yes yes
* Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
* Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
@@ -207,6 +208,7 @@
#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
#define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df
#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
+#define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
@@ -1062,6 +1064,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EBG_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
@@ -1749,6 +1752,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS:
case PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS:
case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS:
+ case PCI_DEVICE_ID_INTEL_EBG_SMBUS:
priv->features |= FEATURE_BLOCK_PROC;
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
--
2.27.0
next reply other threads:[~2020-06-18 13:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-18 13:42 Jarkko Nikula [this message]
2020-06-18 13:42 ` [PATCH 2/2] i2c: i801: Add support for Intel Tiger Lake PCH-H Jarkko Nikula
2020-07-07 13:35 ` Jean Delvare
2020-08-05 9:37 ` Wolfram Sang
2020-07-07 13:33 ` [PATCH 1/2] i2c: i801: Add support for Intel Emmitsburg PCH Jean Delvare
2020-08-05 9:36 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200618134240.4091271-1-jarkko.nikula@linux.intel.com \
--to=jarkko.nikula@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=linux-i2c@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.