From: sbabic at denx.de <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH] ARM: dts: imx6qdl-sabresd: Fix AR8031 phy-mode
Date: Tue, 23 Jun 2020 09:51:39 +0200 (CEST) [thread overview]
Message-ID: <20200623075139.16E7B81E8F@phobos.denx.de> (raw)
In-Reply-To: <20200617173316.32533-1-festevam@gmail.com>
> As per kernel commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode)
> the correct phy-mode should be "rgmii-id", so fix it accordingly
> to fix the Ethernet regression.
> This problem has been exposed by commit:
> commit 13114f38e2ccea9386726d8b9831dfc310589548
> Author: Vladimir Oltean <vladimir.oltean@nxp.com>
> Date: Thu May 7 00:11:51 2020 +0200
> phy: atheros: Explicitly disable RGMII delays
>
> To eliminate any doubts about the out-of-reset value of the PHY, that
> the driver previously relied on.
>
> If bisecting shows that this commit breaks your board you probably have
> a wrong PHY interface mode. You probably want the
> PHY_INTERFACE_MODE_RGMII_RXID or PHY_INTERFACE_MODE_RGMII_ID mode.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
prev parent reply other threads:[~2020-06-23 7:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-17 17:33 [PATCH] ARM: dts: imx6qdl-sabresd: Fix AR8031 phy-mode Fabio Estevam
2020-06-17 17:39 ` Tom Rini
2020-06-23 7:51 ` sbabic at denx.de [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200623075139.16E7B81E8F@phobos.denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.