From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Deepak Katragadda <dkatraga@codeaurora.org>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK),
linux-kernel@vger.kernel.org (open list),
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Taniya Das <tdas@codeaurora.org>, Vinod Koul <vkoul@kernel.org>
Subject: [RESEND PATCH v2 00/13] Enable GPU for SM8150 and SM8250
Date: Mon, 29 Jun 2020 17:17:06 -0400 [thread overview]
Message-ID: <20200629211725.2592-1-jonathan@marek.ca> (raw)
This series adds the missing clock drivers and dts nodes to enable
the GPU on both SM8150 and SM8250.
Note an extra patch [1] is still required for GPU to work on SM8250.
Changes in V2:
* Added "clk: qcom: gcc: fix sm8150 GPU and NPU clocks" to fix the newly added
SM8150 GPU gcc clocks
* Added "Fixes:" tag to "clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL"
* Added yaml schemas to gpucc dt-bindings patches
* Added "clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers" and changed
gpucc patches to use it.
* Removed CLK_IS_CRITICAL from gpu_cc_ahb_clk
* Added missing rpmh regulator level for sm8250 GPU clock levels
* Use sm8150/sm8250 iommu compatibles in dts
* Add gcc_gpu_gpll0_clk_src/gcc_gpu_gpll0_div_clk_src to gpucc clocks in dts
[1] https://gist.github.com/flto/784f1aca761ebf2fe6c105719a4a04ca
Jonathan Marek (13):
clk: qcom: gcc: fix sm8150 GPU and NPU clocks
clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL
clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid
clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll
clk: qcom: gcc: remove unnecessary vco_table from SM8150
dt-bindings: clock: Introduce SM8150 QCOM Graphics clock bindings
dt-bindings: clock: Introduce SM8250 QCOM Graphics clock bindings
clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers
clk: qcom: Add graphics clock controller driver for SM8150
clk: qcom: Add graphics clock controller driver for SM8250
dt-bindings: power: Add missing rpmpd rpmh regulator level
arm64: dts: qcom: add sm8150 GPU nodes
arm64: dts: qcom: add sm8250 GPU nodes
.../bindings/clock/qcom,sm8150-gpucc.yaml | 74 +++
.../bindings/clock/qcom,sm8250-gpucc.yaml | 74 +++
arch/arm64/boot/dts/qcom/sm8150.dtsi | 136 ++++++
arch/arm64/boot/dts/qcom/sm8250.dtsi | 143 ++++++
drivers/clk/qcom/Kconfig | 16 +
drivers/clk/qcom/Makefile | 2 +
drivers/clk/qcom/clk-alpha-pll.c | 70 ++-
drivers/clk/qcom/clk-alpha-pll.h | 15 +-
drivers/clk/qcom/gcc-sm8150.c | 26 +-
drivers/clk/qcom/gdsc.c | 25 +
drivers/clk/qcom/gdsc.h | 1 +
drivers/clk/qcom/gpucc-sc7180.c | 27 +-
drivers/clk/qcom/gpucc-sdm845.c | 27 +-
drivers/clk/qcom/gpucc-sm8150.c | 421 ++++++++++++++++
drivers/clk/qcom/gpucc-sm8250.c | 450 ++++++++++++++++++
include/dt-bindings/clock/qcom,gpucc-sm8150.h | 40 ++
include/dt-bindings/clock/qcom,gpucc-sm8250.h | 40 ++
include/dt-bindings/power/qcom-rpmpd.h | 1 +
18 files changed, 1479 insertions(+), 109 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8150-gpucc.yaml
create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8250-gpucc.yaml
create mode 100644 drivers/clk/qcom/gpucc-sm8150.c
create mode 100644 drivers/clk/qcom/gpucc-sm8250.c
create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8150.h
create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8250.h
--
2.26.1
next reply other threads:[~2020-06-29 21:19 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-29 21:17 Jonathan Marek [this message]
2020-06-29 21:17 ` [RESEND PATCH v2 01/13] clk: qcom: gcc: fix sm8150 GPU and NPU clocks Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 02/13] clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 03/13] clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 04/13] clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 05/13] clk: qcom: gcc: remove unnecessary vco_table from SM8150 Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 06/13] dt-bindings: clock: Introduce SM8150 QCOM Graphics clock bindings Jonathan Marek
2020-07-02 20:43 ` Rob Herring
2020-07-02 20:44 ` Rob Herring
2020-06-29 21:17 ` [RESEND PATCH v2 07/13] dt-bindings: clock: Introduce SM8250 " Jonathan Marek
2020-07-02 20:46 ` Rob Herring
2020-07-02 20:49 ` Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 08/13] clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 09/13] clk: qcom: Add graphics clock controller driver for SM8150 Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 10/13] clk: qcom: Add graphics clock controller driver for SM8250 Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 11/13] dt-bindings: power: Add missing rpmpd rpmh regulator level Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 12/13] arm64: dts: qcom: add sm8150 GPU nodes Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 13/13] arm64: dts: qcom: add sm8250 " Jonathan Marek
2020-07-03 15:03 ` [RESEND PATCH v2 00/13] Enable GPU for SM8150 and SM8250 Dmitry Baryshkov
2020-07-03 15:08 ` Jonathan Marek
2020-07-03 15:14 ` Dmitry Baryshkov
2020-07-03 17:29 ` Dmitry Baryshkov
2020-07-05 21:08 ` Jonathan Marek
2020-07-06 10:28 ` Dmitry Baryshkov
2020-07-06 19:50 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200629211725.2592-1-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dkatraga@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.