From: Jonathan Cameron <jic23@kernel.org>
To: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: michael.hennerich@analog.com, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, robh+dt@kernel.org, ribalda@kernel.org,
tomislav.denis@avl.com, broonie@kernel.org,
alexandru.ardelean@analog.com, sboyd@kernel.org,
ak@it-klinger.de, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
Date: Sat, 4 Jul 2020 17:34:59 +0100 [thread overview]
Message-ID: <20200704173459.78ceec60@archlinux> (raw)
In-Reply-To: <20200703185725.15399-1-grandmaster@al2klimov.de>
On Fri, 3 Jul 2020 20:57:25 +0200
"Alexander A. Klimov" <grandmaster@al2klimov.de> wrote:
> Rationale:
> Reduces attack surface on kernel devs opening the links for MITM
> as HTTPS traffic is much harder to manipulate.
>
> Deterministic algorithm:
> For each file:
> If not .svg:
> For each line:
> If doesn't contain `\bxmlns\b`:
> For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
> If both the HTTP and HTTPS versions
> return 200 OK and serve the same content:
> Replace HTTP with HTTPS.
>
> Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
> ---
> Continuing my work started at 93431e0607e5.
>
> If there are any URLs to be removed completely or at least not HTTPSified:
> Just clearly say so and I'll *undo my change*.
> See also https://lkml.org/lkml/2020/6/27/64
>
> If there are any valid, but yet not changed URLs:
> See https://lkml.org/lkml/2020/6/26/837
>
> Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml | 4 ++--
> Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt | 2 +-
> Documentation/devicetree/bindings/iio/iio-bindings.txt | 2 +-
> Documentation/devicetree/bindings/iio/light/apds9300.txt | 2 +-
> Documentation/devicetree/bindings/iio/light/apds9960.txt | 2 +-
> Documentation/devicetree/bindings/iio/light/opt3001.txt | 2 +-
> Documentation/devicetree/bindings/iio/light/vl6180.txt | 2 +-
> .../devicetree/bindings/iio/potentiometer/mcp41010.txt | 2 +-
> .../devicetree/bindings/iio/potentiostat/lmp91000.txt | 4 ++--
> .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 +-
> .../devicetree/bindings/iio/proximity/devantech-srf04.yaml | 4 ++--
> Documentation/devicetree/bindings/iio/temperature/tmp007.txt | 2 +-
> 12 files changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index d124eba1ce54..fd4eaa3d0ab4 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -12,8 +12,8 @@ maintainers:
> description: |
> Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
> both I2C & SPI interfaces.
> - http://www.analog.com/en/products/mems/accelerometers/adxl345.html
> - http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
> + https://www.analog.com/en/products/mems/accelerometers/adxl345.html
> + https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
>
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> index 639c94ed83e9..17af395b99d9 100644
> --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> @@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
>
> The internal DACs are loaded when the LOADDACS pin is pulled down.
>
> -http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> +https://www.ti.com/lit/ds/sbas106/sbas106.pdf
>
> Required Properties:
> - compatible: Should be one of:
> diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> index af33267727f4..aa63cac7323e 100644
> --- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
> +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> @@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
> output on a device. The length of an IIO specifier is defined by the
> value of a #io-channel-cells property in the IIO provider node.
>
> -[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
> +[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
>
> ==IIO providers==
>
> diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> index aa199e09a493..3aa6db3ee99d 100644
> --- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
> +++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> @@ -1,6 +1,6 @@
> * Avago APDS9300 ambient light sensor
>
> -http://www.avagotech.com/docs/AV02-1077EN
> +https://www.avagotech.com/docs/AV02-1077EN
>
> Required properties:
>
> diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> index 3af325ad194b..c53ddb81c4aa 100644
> --- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
> +++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> @@ -1,6 +1,6 @@
> * Avago APDS9960 gesture/RGB/ALS/proximity sensor
>
> -http://www.avagotech.com/docs/AV02-4191EN
> +https://www.avagotech.com/docs/AV02-4191EN
>
> Required properties:
>
> diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> index 47b13eb8f4ec..9e6f2998e751 100644
> --- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
> +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> @@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
> requires the use of interrupts. Without interrupts, only the simple reading
> of the current light value is supported through the IIO API.
>
> -http://www.ti.com/product/opt3001
> +https://www.ti.com/product/opt3001
>
> Required properties:
> - compatible: should be "ti,opt3001"
> diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> index 2c52952715a0..fb9137d85df9 100644
> --- a/Documentation/devicetree/bindings/iio/light/vl6180.txt
> +++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> @@ -1,6 +1,6 @@
> STMicro VL6180 - ALS, range and proximity sensor
>
> -Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
> +Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
>
> Required properties:
>
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> index 566711b9950c..4f245e8469fd 100644
> --- a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> @@ -1,7 +1,7 @@
> * Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
>
> Datasheet publicly available at:
> -http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> +https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
>
> The node for this driver must be a child node of a SPI controller, hence
> all mandatory properties described in
> diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> index e6d0c2eb345c..f3ab02b0dd41 100644
> --- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> +++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> @@ -1,7 +1,7 @@
> * Texas Instruments LMP91000 series of potentiostats
>
> -LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
> -LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
> +LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
> +LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
>
> Required properties:
>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> index 64c18f1693f0..be2be4b556db 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> @@ -13,7 +13,7 @@ description: |
> Bindings for the All Sensors DLH series pressure sensors.
>
> Specifications about the sensors can be found at:
> - http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
> + https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
>
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> index f86f8b23ef18..ce795279839e 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> @@ -17,9 +17,9 @@ description: |
> until it is received once again
>
> Specifications about the devices can be found at:
> - http://www.robot-electronics.co.uk/htm/srf04tech.htm
> + https://www.robot-electronics.co.uk/htm/srf04tech.htm
>
> - http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
> + https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
>
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
> index da0af234a357..21952c140599 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
> +++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
> @@ -1,6 +1,6 @@
> * TI TMP007 - IR thermopile sensor with integrated math engine
>
> -Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf
> +Link to datasheet: https://www.ti.com/lit/ds/symlink/tmp007.pdf
This one doesn't actually take us anywhere very useful. So probably best
to just drop it. The datasheet has been removed from TI's website it
seems.
>
> Required properties:
>
next prev parent reply other threads:[~2020-07-04 16:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-03 18:57 [PATCH] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio Alexander A. Klimov
2020-07-04 16:34 ` Jonathan Cameron [this message]
2020-07-04 19:33 ` [PATCH v2] " Alexander A. Klimov
2020-07-04 23:05 ` Matt Ranostay
2020-07-12 13:22 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200704173459.78ceec60@archlinux \
--to=jic23@kernel.org \
--cc=ak@it-klinger.de \
--cc=alexandru.ardelean@analog.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=grandmaster@al2klimov.de \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.hennerich@analog.com \
--cc=pmeerw@pmeerw.net \
--cc=ribalda@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tomislav.denis@avl.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.