All of lore.kernel.org
 help / color / mirror / Atom feed
From: Prashant Malani <pmalani@chromium.org>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Benson Leung <bleung@chromium.org>,
	Enric Balletbo i Serra <enric.balletbo@collabora.com>,
	Guenter Roeck <groeck@chromium.org>,
	"Mani, Rajmohan" <rajmohan.mani@intel.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] platform/chrome: cros_ec_typec: USB4 support
Date: Mon, 6 Jul 2020 15:16:31 -0700	[thread overview]
Message-ID: <20200706221631.GA68629@google.com> (raw)
In-Reply-To: <20200703081703.87720-1-heikki.krogerus@linux.intel.com>

Hi Heikki,

On Fri, Jul 03, 2020 at 11:17:03AM +0300, Heikki Krogerus wrote:
> With USB4 mode the mux driver needs the Enter_USB Data
> Object (EUDO) that was used when the USB mode was entered.
> Though the object is not available in the driver, it is
> possible to construct it from the information we have.
> 
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> Hi,
> 
> This patch depends on latest usb-next from Greg KH, this commit in
> particular:
> https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=ad8db94d6813dc659bd4de0531a8a1150559eafb
> 
> Prashant, can you take over the development of this patch (in case it
> still needs work)? I will take a few weeks vacation starting from next
> week (July 6th).

Sure. Have a nice vacation! :)

> I was hoping to get this feature into v5.9 if that's
> possible. But if you guys think there is no hurry, let's forget about
> it. Then we can just wait for 5.9-rc1 and not worry about the
> dependency on Greg's usb-next.
> 
> thanks,
> 
> ---
>  drivers/platform/chrome/cros_ec_typec.c | 42 ++++++++++++++++++++++++-
>  1 file changed, 41 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
> index 0c041b79cbbac..c9713aab9b6b0 100644
> --- a/drivers/platform/chrome/cros_ec_typec.c
> +++ b/drivers/platform/chrome/cros_ec_typec.c
> @@ -13,6 +13,7 @@
>  #include <linux/platform_data/cros_ec_proto.h>
>  #include <linux/platform_data/cros_usbpd_notify.h>
>  #include <linux/platform_device.h>
> +#include <linux/usb/pd.h>
>  #include <linux/usb/typec.h>
>  #include <linux/usb/typec_altmode.h>
>  #include <linux/usb/typec_dp.h>
> @@ -494,6 +495,43 @@ static int cros_typec_enable_dp(struct cros_typec_data *typec,
>  	return typec_mux_set(port->mux, &port->state);
>  }
>  
> +static int cros_typec_enable_usb4(struct cros_typec_data *typec,
> +				  int port_num,
> +				  struct ec_response_usb_pd_control_v2 *pd_ctrl)
> +{
> +	struct cros_typec_port *port = typec->ports[port_num];
> +	struct enter_usb_data data;
> +
> +	data.eudo = EUDO_USB_MODE_USB4 << EUDO_USB_MODE_SHIFT;
> +
> +	/* Cable Speed */
> +	data.eudo |= pd_ctrl->cable_speed << EUDO_CABLE_SPEED_SHIFT;
> +
> +	/* Cable Type */
> +	if (pd_ctrl->control_flags & USB_PD_CTRL_OPTICAL_CABLE)
> +		data.eudo |= EUDO_CABLE_TYPE_OPTICAL << EUDO_CABLE_TYPE_SHIFT;
> +	else if (pd_ctrl->control_flags & USB_PD_CTRL_ACTIVE_CABLE)
> +		data.eudo |= EUDO_CABLE_TYPE_RE_TIMER << EUDO_CABLE_TYPE_SHIFT;
> +
> +	/* REVISIT: Cable Current? */
> +
> +	/* REVISIT: Claiming unconditionally that all tunnels are supported. */
> +	data.eudo |= EUDO_PCIE_SUPPORT;
> +	data.eudo |= EUDO_DP_SUPPORT;
> +
> +	data.eudo |= EUDO_TBT_SUPPORT;
> +	data.eudo |= EUDO_HOST_PRESENT;
> +
> +	data.active_link_training = !!(pd_ctrl->control_flags &
> +				       USB_PD_CTRL_ACTIVE_LINK_UNIDIR);
> +
> +	port->state.alt = NULL;
> +	port->state.data = &data;
> +	port->state.mode = TYPEC_MODE_USB4;
> +
> +	return typec_mux_set(port->mux, &port->state);
> +}
> +
>  static int cros_typec_configure_mux(struct cros_typec_data *typec, int port_num,
>  				uint8_t mux_flags,
>  				struct ec_response_usb_pd_control_v2 *pd_ctrl)
> @@ -514,7 +552,9 @@ static int cros_typec_configure_mux(struct cros_typec_data *typec, int port_num,
>  	if (ret)
>  		return ret;
>  
> -	if (mux_flags & USB_PD_MUX_TBT_COMPAT_ENABLED) {
> +	if (mux_flags & USB_PD_MUX_USB4_ENABLED) {
> +		ret = cros_typec_enable_usb4(typec, port_num, pd_ctrl);
> +	} else if (mux_flags & USB_PD_MUX_TBT_COMPAT_ENABLED) {
>  		ret = cros_typec_enable_tbt(typec, port_num, pd_ctrl);
>  	} else if (mux_flags & USB_PD_MUX_DP_ENABLED) {
>  		ret = cros_typec_enable_dp(typec, port_num, pd_ctrl);
> -- 
> 2.27.0
> 

  reply	other threads:[~2020-07-06 22:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03  8:17 [PATCH] platform/chrome: cros_ec_typec: USB4 support Heikki Krogerus
2020-07-06 22:16 ` Prashant Malani [this message]
2020-07-08 23:21 ` Prashant Malani

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200706221631.GA68629@google.com \
    --to=pmalani@chromium.org \
    --cc=bleung@chromium.org \
    --cc=enric.balletbo@collabora.com \
    --cc=groeck@chromium.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rajmohan.mani@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.