From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Alexander Tsoy <alexander@tsoy.me>,
Takashi Iwai <tiwai@suse.de>, Sasha Levin <sashal@kernel.org>,
Hans de Goede <jwrdegoede@fedoraproject.org>
Subject: [PATCH 4.14 20/27] Revert "ALSA: usb-audio: Improve frames size computation"
Date: Tue, 7 Jul 2020 17:15:47 +0200 [thread overview]
Message-ID: <20200707145749.911548220@linuxfoundation.org> (raw)
In-Reply-To: <20200707145748.944863698@linuxfoundation.org>
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 99703c921864a318e3e8aae74fde071b1ff35bea which is
commit f0bd62b64016508938df9babe47f65c2c727d25c upstream.
It causes a number of reported issues and a fix for it has not hit
Linus's tree yet. Revert this to resolve those problems.
Cc: Alexander Tsoy <alexander@tsoy.me>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/card.h | 4 ----
sound/usb/endpoint.c | 43 +++++--------------------------------------
sound/usb/endpoint.h | 1 -
sound/usb/pcm.c | 2 --
4 files changed, 5 insertions(+), 45 deletions(-)
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -81,10 +81,6 @@ struct snd_usb_endpoint {
dma_addr_t sync_dma; /* DMA address of syncbuf */
unsigned int pipe; /* the data i/o pipe */
- unsigned int framesize[2]; /* small/large frame sizes in samples */
- unsigned int sample_rem; /* remainder from division fs/fps */
- unsigned int sample_accum; /* sample accumulator */
- unsigned int fps; /* frames per second */
unsigned int freqn; /* nominal sampling rate in fs/fps in Q16.16 format */
unsigned int freqm; /* momentary sampling rate in fs/fps in Q16.16 format */
int freqshift; /* how much to shift the feedback value to get Q16.16 */
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -137,12 +137,12 @@ int snd_usb_endpoint_implicit_feedback_s
/*
* For streaming based on information derived from sync endpoints,
- * prepare_outbound_urb_sizes() will call slave_next_packet_size() to
+ * prepare_outbound_urb_sizes() will call next_packet_size() to
* determine the number of samples to be sent in the next packet.
*
- * For implicit feedback, slave_next_packet_size() is unused.
+ * For implicit feedback, next_packet_size() is unused.
*/
-int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep)
+int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
{
unsigned long flags;
int ret;
@@ -159,29 +159,6 @@ int snd_usb_endpoint_slave_next_packet_s
return ret;
}
-/*
- * For adaptive and synchronous endpoints, prepare_outbound_urb_sizes()
- * will call next_packet_size() to determine the number of samples to be
- * sent in the next packet.
- */
-int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
-{
- int ret;
-
- if (ep->fill_max)
- return ep->maxframesize;
-
- ep->sample_accum += ep->sample_rem;
- if (ep->sample_accum >= ep->fps) {
- ep->sample_accum -= ep->fps;
- ret = ep->framesize[1];
- } else {
- ret = ep->framesize[0];
- }
-
- return ret;
-}
-
static void retire_outbound_urb(struct snd_usb_endpoint *ep,
struct snd_urb_ctx *urb_ctx)
{
@@ -226,8 +203,6 @@ static void prepare_silent_urb(struct sn
if (ctx->packet_size[i])
counts = ctx->packet_size[i];
- else if (ep->sync_master)
- counts = snd_usb_endpoint_slave_next_packet_size(ep);
else
counts = snd_usb_endpoint_next_packet_size(ep);
@@ -914,17 +889,10 @@ int snd_usb_endpoint_set_params(struct s
ep->maxpacksize = fmt->maxpacksize;
ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);
- if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) {
+ if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL)
ep->freqn = get_usb_full_speed_rate(rate);
- ep->fps = 1000;
- } else {
+ else
ep->freqn = get_usb_high_speed_rate(rate);
- ep->fps = 8000;
- }
-
- ep->sample_rem = rate % ep->fps;
- ep->framesize[0] = rate / ep->fps;
- ep->framesize[1] = (rate + (ep->fps - 1)) / ep->fps;
/* calculate the frequency in 16.16 format */
ep->freqm = ep->freqn;
@@ -983,7 +951,6 @@ int snd_usb_endpoint_start(struct snd_us
ep->active_mask = 0;
ep->unlink_mask = 0;
ep->phase = 0;
- ep->sample_accum = 0;
snd_usb_endpoint_start_quirk(ep);
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -28,7 +28,6 @@ void snd_usb_endpoint_release(struct snd
void snd_usb_endpoint_free(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep);
-int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep);
void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1484,8 +1484,6 @@ static void prepare_playback_urb(struct
for (i = 0; i < ctx->packets; i++) {
if (ctx->packet_size[i])
counts = ctx->packet_size[i];
- else if (ep->sync_master)
- counts = snd_usb_endpoint_slave_next_packet_size(ep);
else
counts = snd_usb_endpoint_next_packet_size(ep);
next prev parent reply other threads:[~2020-07-07 15:16 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-07 15:15 [PATCH 4.14 00/27] 4.14.188-rc1 review Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 01/27] btrfs: fix a block group ref counter leak after failure to remove block group Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 02/27] btrfs: cow_file_range() num_bytes and disk_num_bytes are same Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 03/27] btrfs: fix data block group relocation failure due to concurrent scrub Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 04/27] mm: fix swap cache node allocation mask Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 05/27] EDAC/amd64: Read back the scrub rate PCI register on F15h Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 06/27] usbnet: smsc95xx: Fix use-after-free after removal Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 07/27] mm/slub.c: fix corrupted freechain in deactivate_slab() Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 08/27] mm/slub: fix stack overruns with SLUB_STATS Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 09/27] usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 10/27] kgdb: Avoid suspicious RCU usage warning Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 11/27] crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock() Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 12/27] cxgb4: use unaligned conversion for fetching timestamp Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 13/27] cxgb4: parse TC-U32 key values and masks natively Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 14/27] hwmon: (max6697) Make sure the OVERT mask is set correctly Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 15/27] hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add() Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 16/27] drm: sun4i: hdmi: Remove extra HPD polling Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 17/27] virtio-blk: free vblk-vqs in error path of virtblk_probe() Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 18/27] i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665 Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 19/27] nfsd: apply umask on fs without ACL support Greg Kroah-Hartman
2020-07-07 15:15 ` Greg Kroah-Hartman [this message]
2020-07-07 15:15 ` [PATCH 4.14 21/27] SMB3: Honor seal flag for multiuser mounts Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 22/27] SMB3: Honor persistent/resilient handle flags " Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 23/27] cifs: Fix the target file was deleted when rename failed Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 24/27] MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 25/27] irqchip/gic: Atomically update affinity Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 26/27] dm zoned: assign max_io_len correctly Greg Kroah-Hartman
2020-07-07 15:15 ` [PATCH 4.14 27/27] efi: Make it possible to disable efivar_ssdt entirely Greg Kroah-Hartman
2020-07-08 6:32 ` [PATCH 4.14 00/27] 4.14.188-rc1 review Naresh Kamboju
[not found] ` <20200707145748.944863698-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
2020-07-08 8:40 ` Jon Hunter
2020-07-08 8:40 ` Jon Hunter
2020-07-08 15:09 ` Shuah Khan
2020-07-08 17:52 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200707145749.911548220@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alexander@tsoy.me \
--cc=jwrdegoede@fedoraproject.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.