From: "Denys Dmytriyenko" <denys@ti.com>
To: Murali Karicheri <m-karicheri2@ti.com>
Cc: <meta-ti@lists.yoctoproject.org>
Subject: Re: [meta-ti] prueth-hsr/prp: add hsr/prp firmware recipe for version 2.15.23
Date: Tue, 7 Jul 2020 12:40:50 -0400 [thread overview]
Message-ID: <20200707164050.GB22569@beryl> (raw)
In-Reply-To: <98b71962-1b6e-ccb0-e49f-67df58a0796b@ti.com>
On Tue, Jul 07, 2020 at 12:29:53PM -0400, Murali Karicheri wrote:
> Denys,
>
> On 7/7/20 12:17 PM, Denys Dmytriyenko wrote:
> >Thank you, everything looks fine. Could you please replace DESCRIPTION with
> >SUMMARY? Thanks.
> >
>
> You mean the below right? Once you confirm I will spin v2 and send it.
>
> Thanks
>
> >Denys
> >
> >
> >On Mon, Jul 06, 2020 at 05:59:58PM -0400, Murali Karicheri wrote:
> >>This patch adds recipe for hsr/prp firmware on am3/4/5 SoCs. The binary
> >>files are located on ti-linux-firmware.git. This is a forward port of
> >>the recipe from processor sdk 6.3
> >>
> >>Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
> >>Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
> >>---
> >> recipes-bsp/pruhsr-fw/pruhsr-fw_git.bb | 36 +++++++++++++++++++++++++
> >> recipes-bsp/pruprp-fw/pruprp-fw_git.bb | 37 ++++++++++++++++++++++++++
> >> 2 files changed, 73 insertions(+)
> >> create mode 100644 recipes-bsp/pruhsr-fw/pruhsr-fw_git.bb
> >> create mode 100644 recipes-bsp/pruprp-fw/pruprp-fw_git.bb
> >>
> >>diff --git a/recipes-bsp/pruhsr-fw/pruhsr-fw_git.bb b/recipes-bsp/pruhsr-fw/pruhsr-fw_git.bb
> >>new file mode 100644
> >>index 000000000000..fd6665f29d17
> >>--- /dev/null
> >>+++ b/recipes-bsp/pruhsr-fw/pruhsr-fw_git.bb
> >>@@ -0,0 +1,36 @@
> >>+DESCRIPTION = "PRU HSR firmware for AM57xx"
>
> SUMMARY = "PRU HSR firmware for AM57xx"
Correct.
> >>+
> >>+LICENSE = "TI-TFL"
> >>+LIC_FILES_CHKSUM = "file://LICENSE.ti;md5=b5aebf0668bdf95621259288c4a46d76"
> >>+
> >>+PV = "2.15.23"
> >>+PE = "1"
> >>+PR = "r0"
> >>+
> >>+COMPATIBLE_MACHINE = "ti33x|ti43x|am57xx-evm|am57xx-hs-evm"
> >>+
> >>+PACKAGE_ARCH = "${MACHINE_ARCH}"
> >>+
> >>+SRCREV = "313e20f312a286bc07b97ef9aca70ef3ce96af29"
> >>+BRANCH ?= "ti-linux-firmware"
> >>+
> >>+SRC_URI = "git://git.ti.com/processor-firmware/ti-linux-firmware.git;protocol=git;branch=${BRANCH}"
> >>+
> >>+S = "${WORKDIR}/git"
> >>+
> >>+TARGET = ""
> >>+TARGET_ti33x = "am335x-pru0-pruhsr-fw.elf am335x-pru1-pruhsr-fw.elf"
> >>+TARGET_ti43x = "am437x-pru0-pruhsr-fw.elf am437x-pru1-pruhsr-fw.elf"
> >>+TARGET_am57xx-evm = "am57xx-pru0-pruhsr-fw.elf am57xx-pru1-pruhsr-fw.elf"
> >>+TARGET_am57xx-hs-evm = "am57xx-pru0-pruhsr-fw.elf am57xx-pru1-pruhsr-fw.elf"
> >>+
> >>+do_install() {
> >>+ install -d ${D}${base_libdir}/firmware/ti-pruss
> >>+ for f in ${TARGET}; do
> >>+ install -m 0644 ${S}/ti-pruss/$f ${D}${base_libdir}/firmware/ti-pruss/$f
> >>+ done
> >>+}
> >>+
> >>+FILES_${PN} = "${base_libdir}/firmware"
> >>+
> >>+INSANE_SKIP_${PN} = "arch"
> >>diff --git a/recipes-bsp/pruprp-fw/pruprp-fw_git.bb b/recipes-bsp/pruprp-fw/pruprp-fw_git.bb
> >>new file mode 100644
> >>index 000000000000..0b9991a5a0a3
> >>--- /dev/null
> >>+++ b/recipes-bsp/pruprp-fw/pruprp-fw_git.bb
> >>@@ -0,0 +1,37 @@
> >>+DESCRIPTION = "PRU PRP firmware for AM57xx"
>
> SUMMARY = "PRU PRP firmware for AM57xx"
>
> >>+
> >>+LICENSE = "TI-TFL"
> >>+LIC_FILES_CHKSUM = "file://LICENSE.ti;md5=b5aebf0668bdf95621259288c4a46d76"
> >>+
> >>+PV = "2.15.23"
> >>+PE = "1"
> >>+PR = "r0"
> >>+
> >>+COMPATIBLE_MACHINE = "ti33x|ti43x|am57xx-evm|am57xx-hs-evm"
> >>+
> >>+PACKAGE_ARCH = "${MACHINE_ARCH}"
> >>+
> >>+SRCREV = "313e20f312a286bc07b97ef9aca70ef3ce96af29"
> >>+BRANCH ?= "ti-linux-firmware"
> >>+
> >>+SRC_URI = "git://git.ti.com/processor-firmware/ti-linux-firmware.git;protocol=git;branch=${BRANCH}"
> >>+
> >>+S = "${WORKDIR}/git"
> >>+
> >>+TARGET = ""
> >>+TARGET_ti33x = "am335x-pru0-pruprp-fw.elf am335x-pru1-pruprp-fw.elf"
> >>+TARGET_ti43x = "am437x-pru0-pruprp-fw.elf am437x-pru1-pruprp-fw.elf"
> >>+TARGET_am57xx-evm = "am57xx-pru0-pruprp-fw.elf am57xx-pru1-pruprp-fw.elf"
> >>+TARGET_am57xx-hs-evm = "am57xx-pru0-pruprp-fw.elf am57xx-pru1-pruprp-fw.elf"
> >>+
> >>+
> >>+do_install() {
> >>+ install -d ${D}${base_libdir}/firmware/ti-pruss
> >>+ for f in ${TARGET}; do
> >>+ install -m 0644 ${S}/ti-pruss/$f ${D}${base_libdir}/firmware/ti-pruss/$f
> >>+ done
> >>+}
> >>+
> >>+FILES_${PN} = "${base_libdir}/firmware"
> >>+
> >>+INSANE_SKIP_${PN} = "arch"
> >>--
> >>2.17.1
> >>
>
> --
> Murali Karicheri
> Texas Instruments
next prev parent reply other threads:[~2020-07-07 16:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-06 21:59 [meta-ti] prueth-hsr/prp: add hsr/prp firmware recipe for version 2.15.23 Murali
2020-07-07 16:17 ` Denys Dmytriyenko
2020-07-07 16:29 ` Murali
2020-07-07 16:40 ` Denys Dmytriyenko [this message]
2020-07-07 16:47 ` Murali
2020-07-07 17:16 ` Denys Dmytriyenko
2020-07-07 17:24 ` Murali
2020-07-07 18:01 ` Murali
2020-07-08 12:24 ` Murali
[not found] ` <161F85EEADC37350.28965@lists.yoctoproject.org>
2020-07-07 17:15 ` Denys Dmytriyenko
2020-07-07 17:23 ` Murali
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200707164050.GB22569@beryl \
--to=denys@ti.com \
--cc=m-karicheri2@ti.com \
--cc=meta-ti@lists.yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.