From: "Gustavo A. R. Silva" <gustavoars@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org,
"Gustavo A. R. Silva" <gustavoars@kernel.org>
Subject: [PATCH] usb: phy: Use fallthrough pseudo-keyword
Date: Tue, 7 Jul 2020 15:00:40 -0500 [thread overview]
Message-ID: <20200707200040.GA4525@embeddedor> (raw)
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
---
drivers/usb/phy/phy-ab8500-usb.c | 12 ++++++------
drivers/usb/phy/phy-fsl-usb.c | 4 ++--
drivers/usb/phy/phy-isp1301-omap.c | 14 +++++++-------
drivers/usb/phy/phy-mv-usb.c | 2 +-
4 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 20c0f082bf9c..aa4a3140394b 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -331,7 +331,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
switch (lsts) {
case USB_LINK_ACA_RID_B_8505:
event = UX500_MUSB_RIDB;
- /* Fall through */
+ fallthrough;
case USB_LINK_NOT_CONFIGURED_8505:
case USB_LINK_RESERVED0_8505:
case USB_LINK_RESERVED1_8505:
@@ -352,7 +352,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_C_NM_8505:
event = UX500_MUSB_RIDC;
- /* Fall through */
+ fallthrough;
case USB_LINK_STD_HOST_NC_8505:
case USB_LINK_STD_HOST_C_NS_8505:
case USB_LINK_STD_HOST_C_S_8505:
@@ -371,7 +371,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_A_8505:
case USB_LINK_ACA_DOCK_CHGR_8505:
event = UX500_MUSB_RIDA;
- /* Fall through */
+ fallthrough;
case USB_LINK_HM_IDGND_8505:
if (ab->mode == USB_IDLE) {
ab->mode = USB_HOST;
@@ -444,7 +444,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
switch (lsts) {
case USB_LINK_ACA_RID_B_8500:
event = UX500_MUSB_RIDB;
- /* Fall through */
+ fallthrough;
case USB_LINK_NOT_CONFIGURED_8500:
case USB_LINK_NOT_VALID_LINK_8500:
ab->mode = USB_IDLE;
@@ -461,7 +461,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_C_HS_8500:
case USB_LINK_ACA_RID_C_HS_CHIRP_8500:
event = UX500_MUSB_RIDC;
- /* Fall through */
+ fallthrough;
case USB_LINK_STD_HOST_NC_8500:
case USB_LINK_STD_HOST_C_NS_8500:
case USB_LINK_STD_HOST_C_S_8500:
@@ -481,7 +481,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_A_8500:
event = UX500_MUSB_RIDA;
- /* Fall through */
+ fallthrough;
case USB_LINK_HM_IDGND_8500:
if (ab->mode == USB_IDLE) {
ab->mode = USB_HOST;
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index b451f4695f3f..01985e1b513a 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -911,10 +911,10 @@ int usb_otg_start(struct platform_device *pdev)
break;
case FSL_USB2_PHY_UTMI_WIDE:
temp |= PORTSC_PTW_16BIT;
- /* fall through */
+ fallthrough;
case FSL_USB2_PHY_UTMI:
temp |= PORTSC_PTS_UTMI;
- /* fall through */
+ fallthrough;
default:
break;
}
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 7041ba030052..4a6462c92ef2 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -581,11 +581,11 @@ static void otg_update_isp(struct isp1301 *isp)
/* HNP failed for some reason (A_AIDL_BDIS timeout) */
notresponding(isp);
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_A_VBUS_ERR:
isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
pr_debug(" --> a_wait_vfall\n");
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_A_WAIT_VFALL:
/* FIXME usbcore thinks port power is still on ... */
clr |= OTG1_VBUS_DRV;
@@ -595,7 +595,7 @@ static void otg_update_isp(struct isp1301 *isp)
isp->phy.otg->state = OTG_STATE_A_WAIT_VRISE;
pr_debug(" --> a_wait_vrise\n");
}
- /* FALLTHROUGH */
+ fallthrough;
default:
toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV);
}
@@ -945,10 +945,10 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
switch (state) {
case OTG_STATE_B_IDLE:
a_idle(isp, "idle");
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_A_IDLE:
enable_vbus_source(isp);
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_A_WAIT_VRISE:
/* we skip over OTG_STATE_A_WAIT_BCON, since
* the HC will transition to A_HOST (or
@@ -1032,12 +1032,12 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
OTG1_DP_PULLUP);
dump_regs(isp, __func__);
#endif
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_B_SRP_INIT:
b_idle(isp, __func__);
l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
omap_writel(l, OTG_CTRL);
- /* FALLTHROUGH */
+ fallthrough;
case OTG_STATE_B_IDLE:
if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) {
#ifdef CONFIG_USB_OTG
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index 06b47f1028b3..ce767ecc0636 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -334,7 +334,7 @@ static void mv_otg_update_state(struct mv_otg *mvotg)
switch (old_state) {
case OTG_STATE_UNDEFINED:
mvotg->phy.otg->state = OTG_STATE_B_IDLE;
- /* FALL THROUGH */
+ fallthrough;
case OTG_STATE_B_IDLE:
if (otg_ctrl->id == 0)
mvotg->phy.otg->state = OTG_STATE_A_IDLE;
next reply other threads:[~2020-07-07 19:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-07 20:00 Gustavo A. R. Silva [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-05-05 14:19 [PATCH] usb: phy: Use fallthrough pseudo-keyword Wei Ming Chen
2021-05-06 9:05 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200707200040.GA4525@embeddedor \
--to=gustavoars@kernel.org \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.