Re: [RESEND PATCH 1/2] arm64: dts: lx2160a: add dspi controller DT nodes

[Shawn Guo <shawnguo@kernel.org>]

On Mon, Jun 22, 2020 at 04:31:08PM +0800, Qiang Zhao wrote:
> From: Chuanhua Han <chuanhua.han@nxp.com>
> 
> Add the dspi support on lx2160
> 
> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
> Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>

When you resend patches, please state why.  Should I drop the patches
I just applied and pick up this version instead?

Shawn

> ---
>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 39 ++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index abaeb58..f56172f 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -777,6 +777,45 @@
>  			status = "disabled";
>  		};
>  
> +		dspi0: spi@2100000 {
> +			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x0 0x2100000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 7>;
> +			clock-names = "dspi";
> +			spi-num-chipselects = <5>;
> +			bus-num = <0>;
> +			status = "disabled";
> +		};
> +
> +		dspi1: spi@2110000 {
> +			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x0 0x2110000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 7>;
> +			clock-names = "dspi";
> +			spi-num-chipselects = <5>;
> +			bus-num = <1>;
> +			status = "disabled";
> +		};
> +
> +		dspi2: spi@2120000 {
> +			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x0 0x2120000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 7>;
> +			clock-names = "dspi";
> +			spi-num-chipselects = <5>;
> +			bus-num = <2>;
> +			status = "disabled";
> +		};
> +
>  		esdhc0: esdhc@2140000 {
>  			compatible = "fsl,esdhc";
>  			reg = <0x0 0x2140000 0x0 0x10000>;
> -- 
> 2.7.4
>