From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: smoch@web.de, Fabio Estevam <festevam@gmail.com>,
linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] ARM: dts: imx6qdl-sabresd: Pass reset-assert-us
Date: Mon, 13 Jul 2020 10:04:16 -0300 [thread overview]
Message-ID: <20200713130416.20040-2-festevam@gmail.com> (raw)
In-Reply-To: <20200713130416.20040-1-festevam@gmail.com>
According to the AR8031 datasheet:
"When using crystal, clock is generated internally after the power is
stable. In order to get reliable power-on-reset, it is recommended to
keep asserting the reset low signal long enough (10 ms) to ensure the
clock is stable and clock-to-reset (1 ms) requirement is satisfied."
Pass the 'reset-assert-us' property to describe such requirement.
While at it, use the 'reset-gpios' property inside the the mdio
node instead of the deprecated usage of 'phy-reset-gpios'.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Use reset-gpios and reset-assert-us inside the mdio node
instead of the deprecated usage of phy-reset-gpios (Soeren)
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 6524ad4b0010..5597d45fffda 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -204,7 +204,6 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-handle = <&phy>;
- phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
fsl,magic-packet;
status = "okay";
@@ -215,6 +214,8 @@
phy: ethernet-phy@1 {
reg = <1>;
qca,clk-out-frequency = <125000000>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
};
};
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-13 13:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-13 13:04 [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add an mdio node Fabio Estevam
2020-07-13 13:04 ` Fabio Estevam [this message]
2020-07-14 9:50 ` [PATCH v2 2/2] ARM: dts: imx6qdl-sabresd: Pass reset-assert-us Soeren Moch
2020-07-14 9:49 ` [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add an mdio node Sören Moch
2020-07-20 2:19 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200713130416.20040-2-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=shawnguo@kernel.org \
--cc=smoch@web.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.