From: Jakub Kicinski <kuba@kernel.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, oss-drivers@netronome.com,
simon.horman@netronome.com, ajit.khaparde@broadcom.com,
sriharsha.basavapatna@broadcom.com, somnath.kotur@broadcom.com,
thomas.lendacky@amd.com, aelior@marvell.com,
skalluru@marvell.com, vishal@chelsio.com, benve@cisco.com,
_govind@gmx.com, dchickles@marvell.com, sburla@marvell.com,
fmanlunas@marvell.com, jeffrey.t.kirsher@intel.com,
anthony.l.nguyen@intel.com, GR-everest-linux-l2@marvell.com,
shshaikh@marvell.com, manishc@marvell.com,
GR-Linux-NIC-Dev@marvell.com, Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH net-next v2 07/12] enic: convert to new udp_tunnel_nic infra
Date: Tue, 14 Jul 2020 11:29:03 -0700 [thread overview]
Message-ID: <20200714182908.690108-8-kuba@kernel.org> (raw)
In-Reply-To: <20200714182908.690108-1-kuba@kernel.org>
Convert to new infra, now the refcounting will be correct,
and driver gets port replay of other ports when offloaded
port gets removed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
drivers/net/ethernet/cisco/enic/enic_main.c | 105 ++++++++------------
1 file changed, 39 insertions(+), 66 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index cd5fe4f6b54c..6bc7e7ba38c3 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -176,50 +176,18 @@ static void enic_unset_affinity_hint(struct enic *enic)
irq_set_affinity_hint(enic->msix_entry[i].vector, NULL);
}
-static void enic_udp_tunnel_add(struct net_device *netdev,
- struct udp_tunnel_info *ti)
+static int enic_udp_tunnel_set_port(struct net_device *netdev,
+ unsigned int table, unsigned int entry,
+ struct udp_tunnel_info *ti)
{
struct enic *enic = netdev_priv(netdev);
- __be16 port = ti->port;
int err;
spin_lock_bh(&enic->devcmd_lock);
- if (ti->type != UDP_TUNNEL_TYPE_VXLAN) {
- netdev_info(netdev, "udp_tnl: only vxlan tunnel offload supported");
- goto error;
- }
-
- switch (ti->sa_family) {
- case AF_INET6:
- if (!(enic->vxlan.flags & ENIC_VXLAN_OUTER_IPV6)) {
- netdev_info(netdev, "vxlan: only IPv4 offload supported");
- goto error;
- }
- /* Fall through */
- case AF_INET:
- break;
- default:
- goto error;
- }
-
- if (enic->vxlan.vxlan_udp_port_number) {
- if (ntohs(port) == enic->vxlan.vxlan_udp_port_number)
- netdev_warn(netdev, "vxlan: udp port already offloaded");
- else
- netdev_info(netdev, "vxlan: offload supported for only one UDP port");
-
- goto error;
- }
- if ((vnic_dev_get_res_count(enic->vdev, RES_TYPE_WQ) != 1) &&
- !(enic->vxlan.flags & ENIC_VXLAN_MULTI_WQ)) {
- netdev_info(netdev, "vxlan: vxlan offload with multi wq not supported on this adapter");
- goto error;
- }
-
err = vnic_dev_overlay_offload_cfg(enic->vdev,
OVERLAY_CFG_VXLAN_PORT_UPDATE,
- ntohs(port));
+ ntohs(ti->port));
if (err)
goto error;
@@ -228,52 +196,50 @@ static void enic_udp_tunnel_add(struct net_device *netdev,
if (err)
goto error;
- enic->vxlan.vxlan_udp_port_number = ntohs(port);
-
- netdev_info(netdev, "vxlan fw-vers-%d: offload enabled for udp port: %d, sa_family: %d ",
- (int)enic->vxlan.patch_level, ntohs(port), ti->sa_family);
-
- goto unlock;
-
+ enic->vxlan.vxlan_udp_port_number = ntohs(ti->port);
error:
- netdev_info(netdev, "failed to offload udp port: %d, sa_family: %d, type: %d",
- ntohs(port), ti->sa_family, ti->type);
-unlock:
spin_unlock_bh(&enic->devcmd_lock);
+
+ return err;
}
-static void enic_udp_tunnel_del(struct net_device *netdev,
- struct udp_tunnel_info *ti)
+static int enic_udp_tunnel_unset_port(struct net_device *netdev,
+ unsigned int table, unsigned int entry,
+ struct udp_tunnel_info *ti)
{
struct enic *enic = netdev_priv(netdev);
int err;
spin_lock_bh(&enic->devcmd_lock);
- if ((ntohs(ti->port) != enic->vxlan.vxlan_udp_port_number) ||
- ti->type != UDP_TUNNEL_TYPE_VXLAN) {
- netdev_info(netdev, "udp_tnl: port:%d, sa_family: %d, type: %d not offloaded",
- ntohs(ti->port), ti->sa_family, ti->type);
- goto unlock;
- }
-
err = vnic_dev_overlay_offload_ctrl(enic->vdev, OVERLAY_FEATURE_VXLAN,
OVERLAY_OFFLOAD_DISABLE);
- if (err) {
- netdev_err(netdev, "vxlan: del offload udp port: %d failed",
- ntohs(ti->port));
+ if (err)
goto unlock;
- }
enic->vxlan.vxlan_udp_port_number = 0;
- netdev_info(netdev, "vxlan: del offload udp port %d, family %d\n",
- ntohs(ti->port), ti->sa_family);
-
unlock:
spin_unlock_bh(&enic->devcmd_lock);
+
+ return err;
}
+static const struct udp_tunnel_nic_info enic_udp_tunnels = {
+ .set_port = enic_udp_tunnel_set_port,
+ .unset_port = enic_udp_tunnel_unset_port,
+ .tables = {
+ { .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN, },
+ },
+}, enic_udp_tunnels_v4 = {
+ .set_port = enic_udp_tunnel_set_port,
+ .unset_port = enic_udp_tunnel_unset_port,
+ .flags = UDP_TUNNEL_NIC_INFO_IPV4_ONLY,
+ .tables = {
+ { .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN, },
+ },
+};
+
static netdev_features_t enic_features_check(struct sk_buff *skb,
struct net_device *dev,
netdev_features_t features)
@@ -2526,8 +2492,8 @@ static const struct net_device_ops enic_netdev_dynamic_ops = {
#ifdef CONFIG_RFS_ACCEL
.ndo_rx_flow_steer = enic_rx_flow_steer,
#endif
- .ndo_udp_tunnel_add = enic_udp_tunnel_add,
- .ndo_udp_tunnel_del = enic_udp_tunnel_del,
+ .ndo_udp_tunnel_add = udp_tunnel_nic_add_port,
+ .ndo_udp_tunnel_del = udp_tunnel_nic_del_port,
.ndo_features_check = enic_features_check,
};
@@ -2552,8 +2518,8 @@ static const struct net_device_ops enic_netdev_ops = {
#ifdef CONFIG_RFS_ACCEL
.ndo_rx_flow_steer = enic_rx_flow_steer,
#endif
- .ndo_udp_tunnel_add = enic_udp_tunnel_add,
- .ndo_udp_tunnel_del = enic_udp_tunnel_del,
+ .ndo_udp_tunnel_add = udp_tunnel_nic_add_port,
+ .ndo_udp_tunnel_del = udp_tunnel_nic_del_port,
.ndo_features_check = enic_features_check,
};
@@ -2963,6 +2929,13 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
patch_level = fls(patch_level);
patch_level = patch_level ? patch_level - 1 : 0;
enic->vxlan.patch_level = patch_level;
+
+ if (vnic_dev_get_res_count(enic->vdev, RES_TYPE_WQ) == 1 ||
+ enic->vxlan.flags & ENIC_VXLAN_MULTI_WQ) {
+ netdev->udp_tunnel_nic_info = &enic_udp_tunnels_v4;
+ if (enic->vxlan.flags & ENIC_VXLAN_OUTER_IPV6)
+ netdev->udp_tunnel_nic_info = &enic_udp_tunnels;
+ }
}
netdev->features |= netdev->hw_features;
--
2.26.2
next prev parent reply other threads:[~2020-07-14 18:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-14 18:28 [PATCH net-next v2 00/12] udp_tunnel: NIC RX port offload infrastructure Jakub Kicinski
2020-07-14 18:28 ` [PATCH net-next v2 01/12] nfp: convert to new udp_tunnel_nic infra Jakub Kicinski
2020-07-14 18:28 ` [PATCH net-next v2 02/12] be2net: " Jakub Kicinski
2020-07-14 18:28 ` [PATCH net-next v2 03/12] xgbe: switch to more generic VxLAN detection Jakub Kicinski
2020-07-14 18:29 ` [PATCH net-next v2 04/12] xgbe: convert to new udp_tunnel_nic infra Jakub Kicinski
2020-07-14 18:29 ` [PATCH net-next v2 05/12] bnx2x: " Jakub Kicinski
2020-07-14 18:29 ` [PATCH net-next v2 06/12] cxgb4: " Jakub Kicinski
2020-07-14 18:29 ` Jakub Kicinski [this message]
2020-07-14 18:29 ` [PATCH net-next v2 08/12] liquidio: " Jakub Kicinski
2020-07-14 18:29 ` [PATCH net-next v2 09/12] liquidio_vf: " Jakub Kicinski
2020-07-14 18:29 ` [PATCH net-next v2 10/12] fm10k: " Jakub Kicinski
2020-07-14 18:29 ` [PATCH net-next v2 11/12] qede: " Jakub Kicinski
2020-07-14 19:15 ` Jakub Kicinski
2020-07-14 18:29 ` [PATCH net-next v2 12/12] qlcnic: " Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200714182908.690108-8-kuba@kernel.org \
--to=kuba@kernel.org \
--cc=GR-Linux-NIC-Dev@marvell.com \
--cc=GR-everest-linux-l2@marvell.com \
--cc=_govind@gmx.com \
--cc=aelior@marvell.com \
--cc=ajit.khaparde@broadcom.com \
--cc=anthony.l.nguyen@intel.com \
--cc=benve@cisco.com \
--cc=davem@davemloft.net \
--cc=dchickles@marvell.com \
--cc=fmanlunas@marvell.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=manishc@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=oss-drivers@netronome.com \
--cc=sburla@marvell.com \
--cc=shshaikh@marvell.com \
--cc=simon.horman@netronome.com \
--cc=skalluru@marvell.com \
--cc=somnath.kotur@broadcom.com \
--cc=sriharsha.basavapatna@broadcom.com \
--cc=thomas.lendacky@amd.com \
--cc=vishal@chelsio.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.